Re: [hylafax-users] Failed to properly detect high-speed data carrier

[EISELE Pascal <peisele@xxxxxxxxxxxx>]

It was external modem only.
I don't understand the log :
Mar 04 09:33:05.30: [ 1082]: <-- [11:AT+FRM=146\r] 
Is it comming from the fax receiver or the fax sender ?
The thing that I need to know is "the problem is comming from the sender machine (hylafax under Solaris) or the recevier machine (hylafax under Linux) ?"
I think the problem came from the serial port but which one ?

Lee Howard a écrit :

EISELE Pascal wrote:

The error is the same with the there different modem tryed : Olitec modem (SpeedCom, Selft Memory 33k & 56k) and one Kortex all in Class 1 mode.

Can you please send the output of 'lspci' with each modem?  (I assume that they are PCI modems.)

Mar 04 09:33:05.30: [ 1082]: <-- [11:AT+FRM=146\r]
Mar 04 09:33:12.41: [ 1082]: --> [2:OK]
 

I don't know what to tell you more.  The AT+FRM=146 command is not supposed to respond/result in OK.  If we can figure out what is happening, then we can maybe make a workaround.

My guess is, though, that these are softmodems and that a newer/different version of the softmodem driver will make things work.

Lee.

--

EISELE Pascal	Direct : +33 (0)3 88 65 76 78
Administrateur systèmes & réseaux	Tél : +33 (0)3 88 65 04 04
13b rue du Maréchal Lefebvre	Fax : +33 (0)3 88 65 76 76
67100 Strasbourg	http://www.appligos.fr