Re: [hylafax-users] Problem with RECV FAX: No answer (T.30 T1 timeout)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.04.28 03:08 hylafax-users-bounce@xxxxxxxxxxx wrote:
> I use RH9.0, Acceleport C/X with ten Kortex kxpro modems and Hylafax
> 4.1.8.
> I can't receive fax at all. I tried successfully with another external
> modem so the problem is the configuration of the modem.
> I tried successfully with another external modem !!!
> Thanks for your help.
>
> Apr 28 11:51:16.06: [18647]: SESSION BEGIN 000000026 19995551212
> Apr 28 11:51:16.06: [18647]: HylaFAX (tm) Version 4.1.8
> Apr 28 11:51:16.06: [18647]: <-- [4:ATA\r]

Echo is off.

> Apr 28 11:51:21.89: [18647]: --> [7:CONNECT]
> Apr 28 11:51:21.89: [18647]: ANSWER: FAX CONNECTION  DEVICE
> '/dev/ttyD006'
> Apr 28 11:51:21.89: [18647]: RECV FAX: begin
> Apr 28 11:51:21.89: [18647]: <-- data [23]
> Apr 28 11:51:21.89: [18647]: <-- data [2]
> Apr 28 11:51:21.95: [18647]: --> [2:OK]
> Apr 28 11:51:24.89: [18647]: --> [0:]
> Apr 28 11:51:24.89: [18647]: MODEM <Empty line>
> Apr 28 11:51:24.89: [18647]: DELAY 1500 ms
> Apr 28 11:51:26.39: [18647]: <-- [9:AT+FTH=3\r]

Echo is still off.

> Apr 28 11:51:28.49: [18647]: --> [2:OK]
> Apr 28 11:51:28.49: [18647]: DELAY 1500 ms
> Apr 28 11:51:29.99: [18647]: <-- [9:AT+FTH=3\r]
> Apr 28 11:51:30.18: [18647]: --> [8:AT+FTH=3]

Echo is on.

Thus the modem was reset.  If it was not done by another process, then 
the modem did it itself, and the modem is at fault.  You can't use this 
modem for faxing like this.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*