HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb



If I might just interject for a moment into this flame war:

     I've run into similar problems with a MT board(a MT5634ZPX-PCI), but I 
wouldn't single out MT.  For reasons I can't fathom,  standalone fax devices 
do seem to be more reliable than any fax boards from any manufacturerer 
operating in fax 2.x modes.   I was a little shocked to find that my MT fax 
board couldn't receive a fax in Class 2 or Class 2.0 from my father-in-law's 
Panasonic fax machine, while he tells me he's never had problems sending or 
receiving faxes with it.  While MT promptly replied to my questions,  they 
didn't have any real solution for the Class 2/2.0 receive problem.  So I do 
the same as many in this group - switch to Class 1, that I could have gotten 
with a much cheaper modem.  These problems really make me wonder.   What is 
so technically challenging about designing computer fax modem boards that can 
be as reliable as a fax machine that you can buy nowadays at Staples or Home 
Depot for under $100 ?  With all the problems with class 2/2.0 modems, as any 
member on this list can attest to, it appears to me that class 1 modems can 
only offer some assurance of consistency and reliablitiy because the software 
can be debugged and upgraded far more easily than firmware.   

George


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions