HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb



On Mon, 2003-10-06 at 21:01, Steve Tuckner wrote:

> I am sad to inform you that there is no active development on this product
> anymore. You can tinker with the receive sensitivity, and see if it makes
> any difference.
> 
> S38 controls the receive sensitivity. Its default is 43 which means -43dbm.
> You could try going to 44 or 45 and see if that helps at all. As you go
> lower (higher numbers), the modem will have trouble distinguishing between
> noise and signal and may not drop carrier when it should.
> 
> I would recommend up dating to our MT5634ZBA-V92 if you want to use a modem
> with active fax development on it.
Steve,
I'm having similar problems with a ISI5634PCI board.
Is there a register that controls receive sensitivity on this board too?
Thank you.
Bye.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions