HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] problems with Multitech Modem MT 2834ZDXb-solved



Hi,

I solved my problem thanks to your postings
and the information I found on HylaFAX site:
http://www.hylafax.org/Modems/multitech-2834.php
I stored a new value of 35 in S38 register of my modem:
               AT&F
               ATS38=35
               AT&F9
               AT&W0
Now I'm testing it and so far it seem to work fine.

Thank you very much to all for the help!

Milen

=================================================
>Hi,
>
>I have problems with a multitech modem MT2834ZDXb  in receive-only configuration
>It fails to receive faxes with the one of the following errors:
>
>1. T.30 T2 timeout, expected page not received
>2. COMREC error
>3. Missing EOL after 5 seconds (section 3.2/T.4)
>
>Is there any known poblems with this type of modems?
>Do I need to change any parameters in modem config file?
>
>Thank you for your time and help!
>Best regards:
>Milen







Project hosted by iFAX Solutions