Re: [hylafax-users] hylafax use only one of two modems

[Abacus Computer <support@xxxxxxxxxxxxxxxxxxx>]

Thanks,
but I am working with sendfax and I do not find any parameter to specify 
the modem to fax.
Normally hylafax must use the second fax if the first is in use - or not? 
Or need this a special configuration?

How can I test ttyS1 by hylafax?

regards
Christian

At 09:25  25.09.03, you wrote:

> Hi Christian,
>
> try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
>
> HIH
> -m
>
> Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > Hi,
> > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems Practical
> > Peripherals Modem  Model # PM144MT II
> >
> > Both are installed and working on ttyS0 and ttyS1, tested with miniserv,
> > and both have the status "Running and idle".
> >
> > But if I send a lot of faxes (10) in a short time (1 minute) all faxes are
> > sent about ttyS0 one after another and nothing about ttyS1.
> > I have no idea what there are wrong.
> >
> > Best regards
> > Christian
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
>
> --
> HAGOS eG                 phone: +49 711 7880592
> Matthias Reich             fax: +49 711 7880535
> Industriestr. 62           web: http://www.hagos.de
> D-70565 Stuttgart         mail: rei@xxxxxxxx
> Germany
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*