HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax use only one of two modems



Hi Christian

man sendfax

      -h [modem@]host[:port]
                   Force  the  jobs to be processed on a specific
                   host  and,  optionally,  using  a   particular
                   modem.  The host may be either a symbolic name
                   or a network address.  If no -h option is sup­
                   plied,  sendfax uses the FAXSERVER environment
                   variable to identify  the  HylaFAX  server  to
                   which  the  jobs  should  be  directed.  If no
                   server is specified then sendfax  attempts  to
                   contact  a  server  on  the local host.  If no
                   modem is specified, the job will be  submitted
                   to any available modem.
HIH

-m



Am Freitag, 26. September 2003 03:07 schrieb Abacus Computer:
> Thanks,
> but I am working with sendfax and I do not find any parameter to specify
> the modem to fax.
> Normally hylafax must use the second fax if the first is in use - or not?
> Or need this a special configuration?
>
> How can I test ttyS1 by hylafax?
>
> regards
> Christian
>
> At 09:25  25.09.03, you wrote:
> >Hi Christian,
> >
> >try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
> >
> >HIH
> >-m
> >
> >Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > > Hi,
> > > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems
> > > Practical Peripherals Modem  Model # PM144MT II
> > >
> > > Both are installed and working on ttyS0 and ttyS1, tested with
> > > miniserv, and both have the status "Running and idle".
> > >
> > > But if I send a lot of faxes (10) in a short time (1 minute) all faxes
> > > are sent about ttyS0 one after another and nothing about ttyS1.
> > > I have no idea what there are wrong.
> > >
> > > Best regards
> > > Christian
> > >
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> >
> >--
> >HAGOS eG                 phone: +49 711 7880592
> >Matthias Reich             fax: +49 711 7880535
> >Industriestr. 62           web: http://www.hagos.de
> >D-70565 Stuttgart         mail: rei@xxxxxxxx
> >Germany
> >
> >____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*

-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions