HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax use only one of two modems



Hi Christian,

try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.

HIH
-m
 
Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> Hi,
> I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems Practical
> Peripherals Modem  Model # PM144MT II
>
> Both are installed and working on ttyS0 and ttyS1, tested with miniserv,
> and both have the status "Running and idle".
>
> But if I send a lot of faxes (10) in a short time (1 minute) all faxes are
> sent about ttyS0 one after another and nothing about ttyS1.
> I have no idea what there are wrong.
>
> Best regards
> Christian
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*

-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions