 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Again, receiving squashed faxes...
- To: hylafax-users@hylafax.org
- Subject: [hylafax-users] Again, receiving squashed faxes...
- From: "[NICK]" <knu@avtsev.spb.ru>
- Date: Tue, 03 Sep 2002 19:30:04 +0400
Quality is ok, but at ~30% progress transfer gets slower ----------------------------------------------------------- Typical recieve log =========================================================== Sep 03 16:20:40.99: [ 1711]: SESSION BEGIN 00000009 78121183239 Sep 03 16:20:40.99: [ 1711]: HylaFAX (tm) Version 4.1.1 Sep 03 16:20:47.30: [ 1711]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Sep 03 16:20:47.30: [ 1711]: STATE CHANGE: ANSWERING -> RECEIVING Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1191, got 0, expected 1728 Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1192, got 0, expected 1728 Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1193, got 0, expected 1728 Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1194, got 0, expected 1728 Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1195, got 0, expected 1728 Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Invalid WhiteTable code word, row 1196, x 0 Sep 03 16:22:14.91: [ 1711]: RECV/CQ: Adjusting for RTC found at row 1190 Sep 03 16:22:16.35: [ 1711]: RECV FAX (00000009): from , page 1 in 1:27, INF, 3.85 line/mm, 1-D MR, 9600 bit/s Sep 03 16:22:16.35: [ 1711]: RECV FAX (00000009): recvq/fax00001.tif from , route to <unspecified>, 1 pages in 1:29 Sep 03 16:22:19.80: [ 1711]: RECV FAX: bin/faxrcvd "recvq/fax00001.tif" "ttyS0" "00000009" "" "" "" Sep 03 16:22:20.15: [ 1711]: SESSION END =========================================================== Also got sent pages shifted left for about 5mm. witching flow control from rtscts to xonxoff shifted page a bit right, just enough for zero left margin. ----------------------------------------------------------- Software =========================================================== Debian GNU/Linux 3.0 (2.2.20) HylaFax 4.1.1 =========================================================== ----------------------------------------------------------- Output from probemodem =========================================================== Probing for best speed to talk to modem: 38400 OK. This looks like a Class 1+2.0 modem. ATI0 RESULT = "OK" RESPONSE = "3366" ATI1 RESULT = "OK" RESPONSE = "7606" ATI2 RESULT = "OK" RESPONSE = "OK" ATI3 RESULT = "OK" RESPONSE = "00:01:03" Class 1 stuff... AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "1" AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA=? RESULT = "OK" RESPONSE = "0,1" AT+FAA? RESULT = "OK" RESPONSE = "0" AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR" AT+FTH=? RESULT = "OK" RESPONSE = "3" AT+FRH=? RESULT = "OK" RESPONSE = "3" AT+FTM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146" AT+FRM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146" AT+FTS=? RESULT = "OK" RESPONSE = "OK" AT+FRS=? RESULT = "OK" RESPONSE = "OK" Class 2.0 stuff... AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0" AT+FCLASS? RESULT = "OK" RESPONSE = "1" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=2.0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "2.0" AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR" AT+FDR=? RESULT = "OK" RESPONSE = "OK" AT+FDT=? RESULT = "OK" RESPONSE = "OK" AT+FIP=? RESULT = "OK" RESPONSE = "OK" AT+FAA=? RESULT = "OK" RESPONSE = "0,1" AT+FAA? RESULT = "OK" RESPONSE = "0" AT+FBS? RESULT = "OK" RESPONSE = "1800,4000" AT+FBO=? RESULT = "OK" RESPONSE = "(0,1)" AT+FBO? RESULT = "OK" RESPONSE = "0" AT+FBU=? RESULT = "OK" RESPONSE = "0" AT+FBU? RESULT = "OK" RESPONSE = "0" AT+FCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)" AT+FCC? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0" AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)" AT+FCQ? RESULT = "OK" RESPONSE = "1,0" AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)" AT+FCR? RESULT = "OK" RESPONSE = "1" AT+FCS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCS? RESULT = "OK" RESPONSE = "FCS:0,0,0,2,0,0,0,0" AT+FCT=? RESULT = "OK" RESPONSE = "(0-255)" AT+FCT? RESULT = "OK" RESPONSE = "030" AT+FEA=? RESULT = "OK" RESPONSE = "(0,1)" AT+FEA? RESULT = "OK" RESPONSE = "0" AT+FFC=? RESULT = "OK" RESPONSE = "0,0,0,0" AT+FFC? RESULT = "OK" RESPONSE = "0,0,0,0" AT+FHS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FHS? RESULT = "OK" RESPONSE = "00" AT+FIE=? RESULT = "OK" RESPONSE = "0" AT+FIE? RESULT = "OK" RESPONSE = "0" AT+FIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)" AT+FIS? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0" AT+FLI=? RESULT = "OK" RESPONSE = "(20-7E)" AT+FLI? RESULT = "OK" RESPONSE = """" AT+FLO=? RESULT = "OK" RESPONSE = "(0-2)" AT+FLO? RESULT = "OK" RESPONSE = "1" AT+FLP=? RESULT = "OK" RESPONSE = "(0,1)" AT+FLP? RESULT = "OK" RESPONSE = "0" AT+FMI? RESULT = "OK" RESPONSE = "USRobotics Courier V.Everything" AT+FMM? RESULT = "OK" RESPONSE = "Product type US/Canada External" AT+FMR? RESULT = "OK" RESPONSE = "Supervisor date 11/01/95" AT+FMS=? RESULT = "OK" RESPONSE = "(0-5)" AT+FMS? RESULT = "OK" RESPONSE = "0" AT+FNR=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1),(0,1)" AT+FNR? RESULT = "OK" RESPONSE = "0,0,0,0" AT+FNS=? RESULT = "OK" RESPONSE = "90" AT+FNS? RESULT = "OK" RESPONSE = """" AT+FPI=? RESULT = "OK" RESPONSE = "(20-7E)" AT+FPI? RESULT = "OK" RESPONSE = """" AT+FPP=? RESULT = "OK" RESPONSE = "(0,1)" AT+FPP? RESULT = "OK" RESPONSE = "0" AT+FPR=? RESULT = "OK" RESPONSE = "(0,1,2,4,8,16,24)" AT+FPR? RESULT = "OK" RESPONSE = "0" AT+FPS=? RESULT = "OK" RESPONSE = "(1-5)" AT+FPS? RESULT = "OK" RESPONSE = "1" AT+FRQ=? RESULT = "OK" RESPONSE = "0,0" AT+FRQ? RESULT = "OK" RESPONSE = "0,0" AT+FRY=? RESULT = "OK" RESPONSE = "0" AT+FRY? RESULT = "OK" RESPONSE = "0" AT+FSP=? RESULT = "OK" RESPONSE = "(0,1)" AT+FSP? RESULT = "OK" RESPONSE = "0" AT+FKS=? RESULT = "OK" RESPONSE = "OK" =========================================================== TIA, [NICK] ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Prev by Date: Re: [hylafax-users] Setting up faxgetty after originally in send only mode?
- Next by Date: Re: [hylafax-users] Fw: Fw: Problem with state 'waiting for modem to come ready' after sending a fax
- Previous by thread: *****SPAM***** Re: [hylafax-users] automatic paper cutter ignores Formfeed
- Next by thread: [hylafax-users] i18n and email2fax
- Index(es):
Project hosted by iFAX Solutions