 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
*****SPAM***** Re: [hylafax-users] automatic paper cutter ignores Formfeed
- To: Hylafax Mailinglist <hylafax-users@hylafax.org>
- Subject: *****SPAM***** Re: [hylafax-users] automatic paper cutter ignores Formfeed
- From: Alexander.so-8859-1?Q?Döring?doering@melosgmbh.de
- Date: Tue, 03 Sep 2002 14:36:40 +0200
SPAM: -------------------- Start SpamAssassin results ---------------------- SPAM: This mail is probably spam. The original message has been altered SPAM: so you can recognise or block similar unwanted mail in future. SPAM: See http://spamassassin.org/tag/ for more details. SPAM: SPAM: Content analysis details: (6.4 hits, 5 required) SPAM: FORGED_RCVD_FOUND (0.0 points) Possibly-forged 'Received:' header found SPAM: DOUBLE_CAPSWORD (1.1 points) BODY: A word in all caps repeated on the line SPAM: UPPERCASE_25_50 (1.9 points) BODY: message body is 25-50% uppercase SPAM: NO_MX_FOR_FROM (1.8 points) No MX records for the From: domain SPAM: MSG_ID_ADDED_BY_MTA_2 (1.6 points) 'Message-Id' was added by a relay (2) SPAM: SPAM: -------------------- End of SpamAssassin results --------------------- Lee Howard wrote: > > On 2002.09.02 04:45 Alexander Döring wrote: > > System: SuSE Linux 7.2 > > Kernel: 2.4.4-4 GB #8 > > GCC:2.95.3 > > > > Modem: Elsa Mikrolink 33.6 TQV > > > > Hello list, > > > > after installing Hylafax we have problems with some Canon T21 fax. > > With our old Fax-Server the automatic paper cutter works fine > > (cut on formfeed). > > With Hylafax there is only one cut at the end of the fax. > > > > Who can help ? > > Please send a session log. > > Lee. Here is a session log: Sep 03 13:15:21.45: [ 1757]: SESSION BEGIN 00010165 493082093309 Sep 03 13:15:21.45: [ 1757]: SEND FAX: JOB 1393 DEST 82093309 COMMID 00010165 Sep 03 13:15:21.45: [ 1757]: DELAY 2600 ms Sep 03 13:15:24.15: [ 1757]: <-- [16:ATX3E0V1Q0S0=0H\r] Sep 03 13:15:24.17: [ 1757]: --> [2:OK] Sep 03 13:15:24.17: [ 1757]: <-- [21:ATS8=2S7=60\Q3&D2&C1\r] Sep 03 13:15:24.19: [ 1757]: --> [2:OK] Sep 03 13:15:24.19: [ 1757]: <-- [14:AT+FCLASS=2.0\r] Sep 03 13:15:24.20: [ 1757]: --> [2:OK] Sep 03 13:15:24.20: [ 1757]: <-- [9:AT+FLO=2\r] Sep 03 13:15:24.21: [ 1757]: --> [2:OK] Sep 03 13:15:24.21: [ 1757]: <-- [9:AT+FPP=0\r] Sep 03 13:15:24.22: [ 1757]: --> [2:OK] Sep 03 13:15:24.22: [ 1757]: <-- [9:AT+FBO=0\r] Sep 03 13:15:24.23: [ 1757]: --> [2:OK] Sep 03 13:15:24.23: [ 1757]: <-- [10:AT+FCT=30\r] Sep 03 13:15:24.24: [ 1757]: --> [2:OK] Sep 03 13:15:24.24: [ 1757]: <-- [15:AT+FNR=1,1,1,1\r] Sep 03 13:15:24.25: [ 1757]: --> [2:OK] Sep 03 13:15:24.25: [ 1757]: <-- [9:AT+FIE=0\r] Sep 03 13:15:24.26: [ 1757]: --> [2:OK] Sep 03 13:15:24.26: [ 1757]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Sep 03 13:15:24.28: [ 1757]: --> [2:OK] Sep 03 13:15:24.28: [ 1757]: <-- [5:ATM1\r] Sep 03 13:15:24.29: [ 1757]: --> [2:OK] Sep 03 13:15:24.29: [ 1757]: <-- [14:AT+FCLASS=2.0\r] Sep 03 13:15:24.40: [ 1757]: --> [2:OK] Sep 03 13:15:24.40: [ 1757]: <-- [9:AT+FLO=2\r] Sep 03 13:15:24.51: [ 1757]: --> [2:OK] Sep 03 13:15:24.51: [ 1757]: <-- [9:AT+FPP=0\r] Sep 03 13:15:24.62: [ 1757]: --> [2:OK] Sep 03 13:15:24.62: [ 1757]: <-- [9:AT+FBO=0\r] Sep 03 13:15:24.73: [ 1757]: --> [2:OK] Sep 03 13:15:24.73: [ 1757]: <-- [10:AT+FCT=30\r] Sep 03 13:15:24.84: [ 1757]: --> [2:OK] Sep 03 13:15:24.84: [ 1757]: <-- [15:AT+FNR=1,1,1,1\r] Sep 03 13:15:24.95: [ 1757]: --> [2:OK] Sep 03 13:15:24.95: [ 1757]: <-- [9:AT+FIE=0\r] Sep 03 13:15:25.06: [ 1757]: --> [2:OK] Sep 03 13:15:25.06: [ 1757]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Sep 03 13:15:25.18: [ 1757]: --> [2:OK] Sep 03 13:15:25.18: [ 1757]: <-- [17:AT+FLI="Labor28"\r] Sep 03 13:15:25.30: [ 1757]: --> [2:OK] Sep 03 13:15:25.30: [ 1757]: DIAL 82093309 Sep 03 13:15:25.30: [ 1757]: <-- [15:ATDT0W82093309\r] Sep 03 13:15:49.33: [ 1757]: --> [4:+FCO] Sep 03 13:15:51.20: [ 1757]: --> [27:+FCI:" 49 30 2498814"] Sep 03 13:15:51.20: [ 1757]: REMOTE CSI "49 30 2498814" Sep 03 13:15:51.20: [ 1757]: --> [20:+FIS:1,3,0,2,0,0,0,4] Sep 03 13:15:51.20: [ 1757]: --> [2:OK] Sep 03 13:15:51.20: [ 1757]: REMOTE best rate 9600 bit/s Sep 03 13:15:51.20: [ 1757]: REMOTE max page width 1728 pixels in 215 mm Sep 03 13:15:51.20: [ 1757]: REMOTE max unlimited page length Sep 03 13:15:51.20: [ 1757]: REMOTE best vres 7.7 line/mm Sep 03 13:15:51.20: [ 1757]: REMOTE best format 1-D MR Sep 03 13:15:51.20: [ 1757]: REMOTE best 20 ms, 10 ms/scanline Sep 03 13:15:51.20: [ 1757]: USE 9600 bit/s Sep 03 13:15:51.20: [ 1757]: USE 20 ms, 10 ms/scanline Sep 03 13:15:51.20: [ 1757]: SEND file "docq/doc1394.ps;00" Sep 03 13:15:51.20: [ 1757]: USE page width 1728 pixels in 215 mm Sep 03 13:15:51.20: [ 1757]: USE unlimited page length Sep 03 13:15:51.20: [ 1757]: USE 3.85 line/mm Sep 03 13:15:51.20: [ 1757]: USE 1-D MR Sep 03 13:15:51.20: [ 1757]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r] Sep 03 13:15:51.32: [ 1757]: --> [2:OK] Sep 03 13:15:51.32: [ 1757]: <-- [7:AT+FDT\r] Sep 03 13:15:57.48: [ 1757]: --> [20:+FCS:0,3,0,2,0,0,0,5] Sep 03 13:15:57.79: [ 1757]: --> [7:CONNECT] Sep 03 13:15:57.79: [ 1757]: SEND begin page Sep 03 13:15:57.79: [ 1757]: <-- data [1027] Sep 03 13:15:57.79: [ 1757]: <-- data [1030] Sep 03 13:15:57.79: [ 1757]: <-- data [1024] Sep 03 13:15:57.79: [ 1757]: <-- data [1024] Sep 03 13:15:57.79: [ 1757]: <-- data [1024] Sep 03 13:15:59.80: [ 1757]: <-- data [1024] Sep 03 13:16:01.25: [ 1757]: <-- data [2] Sep 03 13:16:01.25: [ 1757]: SENT 6146 bytes of data Sep 03 13:16:01.25: [ 1757]: SEND 1D RTC Sep 03 13:16:01.25: [ 1757]: <-- data [9] Sep 03 13:16:01.25: [ 1757]: SEND end page Sep 03 13:16:01.25: [ 1757]: SEND send MPS (more pages, same document) Sep 03 13:16:01.25: [ 1757]: <-- data [2] Sep 03 13:16:29.07: [ 1757]: --> [2:OK] Sep 03 13:16:29.07: [ 1757]: SEND recv MCF (message confirmation) Sep 03 13:16:29.07: [ 1757]: SEND FAX (00010165): FROM doering@lmc2.labor28.de TO 82093309 (page 1 of 2 sent in 0:38) Sep 03 13:16:29.07: [ 1757]: USE page width 1728 pixels in 215 mm Sep 03 13:16:29.07: [ 1757]: USE unlimited page length Sep 03 13:16:29.07: [ 1757]: USE 3.85 line/mm Sep 03 13:16:29.07: [ 1757]: USE 1-D MR Sep 03 13:16:29.07: [ 1757]: <-- [7:AT+FDT\r] Sep 03 13:16:29.49: [ 1757]: --> [7:CONNECT] Sep 03 13:16:29.49: [ 1757]: SEND begin page Sep 03 13:16:29.49: [ 1757]: <-- data [1028] Sep 03 13:16:29.49: [ 1757]: <-- data [899] Sep 03 13:16:29.49: [ 1757]: SENT 1919 bytes of data Sep 03 13:16:29.49: [ 1757]: SEND 1D RTC Sep 03 13:16:29.49: [ 1757]: <-- data [9] Sep 03 13:16:29.49: [ 1757]: SEND end page Sep 03 13:16:29.49: [ 1757]: SEND send EOP (no more pages or documents) Sep 03 13:16:29.49: [ 1757]: <-- data [2] Sep 03 13:16:39.41: [ 1757]: --> [7:+FHS:00] Sep 03 13:16:39.41: [ 1757]: REMOTE HANGUP: Normal and proper end of connection (code 0) Sep 03 13:16:39.41: [ 1757]: SEND recv MCF (message confirmation) Sep 03 13:16:39.41: [ 1757]: SEND FAX (00010165): FROM doering@lmc2.labor28.de TO 82093309 (page 2 of 2 sent in 0:10) Sep 03 13:16:39.41: [ 1757]: SEND FAX (00010165): FROM doering@lmc2.labor28.de TO 82093309 (docq/doc1394.ps;00 sent in 0:48) Sep 03 13:16:39.41: [ 1757]: <-- [4:ATH\r] Sep 03 13:16:40.63: [ 1757]: --> [2:OK] Sep 03 13:16:40.73: [ 1757]: SESSION END Alex. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Prev by Date: [hylafax-users] Can anyone offer/suggest a commercial service to use Hylafax to send a potential large number of different faxes simultaneously?
- Next by Date: Re: [hylafax-users] Tif file unopenable when received.
- Previous by thread: [hylafax-users] Can anyone offer/suggest a commercial service to use Hylafax to send a potential large number of different faxes simultaneously?
- Next by thread: [hylafax-users] Again, receiving squashed faxes...
- Index(es):
Project hosted by iFAX Solutions