Re: [hylafax-users] Setting up faxgetty after originally in send only mode?

[Bill Barasch <bill.barasch@creo.com>]

Take a look at http://www.hylafax.org/setup.php#Inbound

you need to get faxgetty to load for the inbound service. 
If your can send faxes then the configuration should be sufficient. Run
Faxgetty for each modem as is shown in the example and you should be able to
receive faxes.

This is an example from my inittab file
t2:23:respawn:/usr/local/sbin/faxgetty term/b
t3:23:respawn:/usr/local/sbin/faxgetty term/a
~

Bill 

-----Original Message-----
From: Sunil William Savkar [mailto:savkar@inthespace.com]
Sent: Monday, September 02, 2002 6:44 AM
To: bill.barasch@creo.com
Cc: savkar@inthespace.com; hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Setting up faxgetty after originally in send
only mode?


The whole point is I am not running faxgetty and would like to set it up
to be properly configured.  Currently hylafax is only set up for send
mode, not receive mode.

Is there some commands that I can use to make sure things are set up
correctly for faxgetty (such as the faxsetup script?)

Sunil

> Are you running faxgetty at the moment. You can run ps -ef |grep fax to
> see if the faxgetty is up.
> Bill
>
> -----Original Message-----
> From: Sunil William Savkar [mailto:savkar@inthespace.com]
> Sent: Saturday, August 31, 2002 5:53 PM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] Setting up faxgetty after originally in send
> only mode?
>
>
>
> Hi.
>
>
>
> I have send mode working great now with my new USR faxmodem.  Not a
> single problem in 2.0 (class) mode.  Anyway, I'd like to now set up for
> answer mode, but can't seem to figure out the simplest way to configure.
>
>
>
> Unlike send mode, I don't seem to be able to rerun faxsetup -server to
> set up for answering.
>
>
>
> I have read the docs, but it isn't exactly clear.  How do I now go about
> replacing current method with faxgetty for answering and sending?
>
>
>
> Thanks in advance.
>
>
> Sunil



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*