Re: [hylafax-users] Multiple attempts to send a fax...

["Toby Chamberlain" <tjchamberlain@hotmail.com>]

Hmmm...

I don't think the modem is the problem - the speaker is on and makes no
sound (not even the "click" when it picks up). The modem is also used by
vgetty for voice messages and there is no problem there. I turned on full
server tracing (0x03FFFF) and there seems to be no action at all after the
SUBMIT JOB xx. Also, all the qXX files in /sendq have totpages set to 0...
maybe this is the problem or maybe it gets set later in the process...??

I also tried turning off the vgetty to see if it was locking the line but
then sendfax gave "Unable to open schedular FIFO: No such device or address"
in response to the JSUB.. This job seems to submit fine when vgetty (the one
from mgetty-sendfax) is running (wierd or what?).

Any ideas?

Thanks,
Toby

> As part of your tests you should  turn on the modem speaker and listen to
> see what is happening when Hylafax tries to take the line.  Also you can
> ATX0 this will prevent the modem from looking for a dialtone before
dialing.
>
>
> Also take a look at
> http://tools.supportforyourpc.com/get_article.asp?aid=402 Troubleshooting
No
> Dialtone Errors.
>
> Bill
>
>