Re: [hylafax-users] Problems:pager size, number of pages and others

[Christoph Scheeder <christoph.scheeder@scheeder.de>]

hi,
check your /var/spool/fax/etc/config.tty for your modem.
There is a variable in called MaxRecvPages, 
this value tells hylafax how many pages a fax must not exceed.
set it to something big like 25 or so and your problem should be gone.
Christoph

Pedro_Rocadas/CREDITUS/PT%CREDITUS@creditus.pt schrieb:
> 
> Hi. i'm trying implement linux here(they are NT believers:)) and they give
> me a chance. this is my log output for inbound calls. My big problem is
> quoted with $
> 
> Feb 14 17:37:30.46: [ 1454]: SESSION BEGIN 00000076 3512222222
> Feb 14 17:37:30.46: [ 1454]: <-- [4:ATA\r]
> Feb 14 17:37:35.74: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:35.74: [ 1454]: ANSWER: FAX CONNECTION
> Feb 14 17:37:35.74: [ 1454]: RECV FAX: begin
> Feb 14 17:37:35.75: [ 1454]: <-- data [23]
> Feb 14 17:37:35.75: [ 1454]: <-- data [2]
> Feb 14 17:37:35.77: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:35.77: [ 1454]: <-- data [10]
> Feb 14 17:37:35.77: [ 1454]: <-- data [2]
> Feb 14 17:37:37.73: [ 1454]: --> [2:OK]
> Feb 14 17:37:37.73: [ 1454]: <-- [9:AT+FRH=3\r]
> Feb 14 17:37:38.50: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:39.89: [ 1454]: --> [2:OK]
> Feb 14 17:37:39.89: [ 1454]: REMOTE TSI "223333333"
> Feb 14 17:37:39.89: [ 1454]: <-- [9:AT+FRH=3\r]
> Feb 14 17:37:39.91: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:40.18: [ 1454]: --> [2:OK]
> 
> $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
> $Feb 14 17:37:40.18: [ 1454]: REMOTE wants 14400 bit/s
> $Feb 14 17:37:40.18: [ 1454]: REMOTE wants page width 1728 pixels in 215 mm
> $Feb 14 17:37:40.18: [ 1454]: REMOTE wants unlimited page length
> $Feb 14 17:37:40.18: [ 1454]: REMOTE wants 3.85 line/mm
> $Feb 14 17:37:40.18: [ 1454]: REMOTE wants 2-D MR
> $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
> 
> Feb 14 17:37:40.18: [ 1454]: RECV training at v.17 14400 bit/s
> Feb 14 17:37:40.18: [ 1454]: <-- [11:AT+FRM=145\r]
> Feb 14 17:37:41.87: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:43.43: [ 1454]: RECV: TCF 2811 bytes, 3% non-zero, 2697
> zero-run
> Feb 14 17:37:43.44: [ 1454]: --> [10:NO CARRIER]
> Feb 14 17:37:43.44: [ 1454]: DELAY 75 ms
> Feb 14 17:37:43.52: [ 1454]: <-- [9:AT+FTH=3\r]
> Feb 14 17:37:43.72: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:43.72: [ 1454]: <-- data [3]
> Feb 14 17:37:43.72: [ 1454]: <-- data [2]
> Feb 14 17:37:44.90: [ 1454]: --> [2:OK]
> Feb 14 17:37:44.90: [ 1454]: TRAINING succeeded
> Feb 14 17:37:44.90: [ 1454]: RECV FAX (00000076): recvq/fax00013.tif from
> 222333333, route to <unspecified>, 0 pages in 0:09
> Feb 14 17:37:44.92: [ 1454]: RECV FAX: Maximum receive page count exceeded,
> job terminated
> Feb 14 17:37:44.92: [ 1454]: <-- [9:AT+FTH=3\r]
> Feb 14 17:37:44.96: [ 1454]: --> [7:CONNECT]
> Feb 14 17:37:44.96: [ 1454]: <-- data [3]
> Feb 14 17:37:44.96: [ 1454]: <-- data [2]
> Feb 14 17:37:46.14: [ 1454]: --> [2:OK]
> 
> $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
> $Feb 14 17:37:46.14: [ 1454]: RECV FAX (00000076): session with 222333333
> terminated $abnormally: Maximum receive page count exceeded, job terminated
> $Feb 14 17:37:46.15: [ 1454]: RECV FAX: bin/faxrcvd "recvq/fax00013.tif"
> "ttyS1" $"00000076" "Maximum receive page count exceeded, job terminated"
> $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
> 
> Feb 14 17:37:46.28: [ 1454]: RECV FAX: end
> Feb 14 17:37:46.28: [ 1454]: SESSION END
> 
> Any idea? By the way, my modem USRobotics 56k voice faxmodem Hylafax
> version 4.1beta1-1rh5
> 
> Thanks
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null