HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Sending SMS to German D2-Provider





My windows box uses this telephone number: 01722278000

I used this number some months ago, it was busy all the time.
I have not used it for months now.

So the busy may just be a normal state with D2?

Bernd



> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of FMK
> Sent: Thursday, August 17, 2000 2:04 PM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] Sending SMS to German D2-Provider
> 
> 
> Hi all !
> 
> I want (or have to) send SMS to German D2 (Gateway 01722278020 and
> 01722278020, tried both) with v4.0pl2, but everytime I try I get
> this back:
> 
> : [25100]: SESSION BEGIN 00001027 491722278020
> : [25100]: SEND PAGE: JOB 672 DEST 01722278020 COMMID 00001027
> : [25100]: MODEM set DTR OFF
> : [25100]: DELAY 2600 ms
> : [25100]: MODEM set DTR ON
> : [25100]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, 
> output flow RTS/CTS
> : [25100]: MODEM flush i/o
> : [25100]: <-- [17:AT&FE0V1Q0S0=0H0\r]
> : [25100]: --> [2:OK]
> : [25100]: <-- [18:ATS8=2S7=60&D2&C1\r]
> : [25100]: --> [2:OK]
> : [25100]: <-- [7:ATL0M1\r]
> : [25100]: --> [2:OK]
> : [25100]: MODEM set parity: 7 bits, even parity
> : [25100]: MODEM input buffering enabled
> : [25100]: <-- [12:AT+FCLASS=0\r]
> : [25100]: --> [2:OK]
> : [25100]: DIAL 01722278020
> : [25100]: <-- [17:ATDT01722278020@\r]
> : [25100]: --> [4:BUSY]
> : [25100]: PAGE FAILED: Busy signal detected
> : [25100]: <-- [5:ATH0\r]
> : [25100]: --> [2:OK]: [25100]: MODEM input buffering enabled
> : [25100]: MODEM set DTR OFF
> : [25100]: SESSION END
> 
> Sometimes, I get this instead:
> 
> : [25852]: SESSION BEGIN 00001033 491722278020
> : [25852]: SEND PAGE: JOB 675 DEST 01722278020 COMMID 00001033
> : [25852]: MODEM set DTR OFF
> : [25852]: DELAY 2600 ms
> : [25852]: MODEM set DTR ON
> : [25852]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, 
> output flow RTS/CTS
> : [25852]: MODEM flush i/o
> : [25852]: <-- [17:AT&FE0V1Q0S0=0H0\r]
> : [25852]: --> [2:OK]
> : [25852]: <-- [18:ATS8=2S7=60&D2&C1\r]
> : [25852]: --> [2:OK]
> : [25852]: <-- [7:ATL0M1\r]
> : [25852]: --> [2:OK]
> : [25852]: MODEM set parity: 8 bits, no parity
> : [25852]: MODEM input buffering enabled
> : [25852]: <-- [12:AT+FCLASS=0\r]
> : [25852]: --> [2:OK]
> : [25852]: DIAL 01722278020
> : [25852]: <-- [17:ATDT01722278020@\r]
> : [25852]: --> [9:NO ANSWER]
> : [25852]: PAGE FAILED: No answer from remote
> : [25852]: <-- [5:ATH0\r]
> : [25852]: --> [2:OK]
> : [25852]: MODEM input buffering enabled
> : [25852]: MODEM set DTR OFF
> : [25852]: SESSION END
> 
> 
> 
> My pagermap looks like this:
> 
> #--- Pagermap Start ----
> #--- hylafax pagermap /var/spool/fax/etc/pagermap ----
> # SMS to D1
> 0170(.*)        01712521001/49170\1
> 0171(.*)        01712521001/49171\1
> 
> # SMS to E-Plus
> 0177(.*)        01771167/49177\1
> 
> # SMS to D2
> 0172(.*)        01722278025/0049172\1
> 
> 
> Any Ideas ?? Could anybody who got this D2-thingie working send me his
> pagermap or any hints why those SMSes fail ??
> 
> Thanks & Greetings
> 
> Florian
> 
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org 
> < /dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions