[hylafax-users] Sending SMS to German D2-Provider

[FMK <meyer-kassel@online-shop-ag.de>]

Hi all !

I want (or have to) send SMS to German D2 (Gateway 01722278020 and
01722278020, tried both) with v4.0pl2, but everytime I try I get
this back:

: [25100]: SESSION BEGIN 00001027 491722278020
: [25100]: SEND PAGE: JOB 672 DEST 01722278020 COMMID 00001027
: [25100]: MODEM set DTR OFF
: [25100]: DELAY 2600 ms
: [25100]: MODEM set DTR ON
: [25100]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
: [25100]: MODEM flush i/o
: [25100]: <-- [17:AT&FE0V1Q0S0=0H0\r]
: [25100]: --> [2:OK]
: [25100]: <-- [18:ATS8=2S7=60&D2&C1\r]
: [25100]: --> [2:OK]
: [25100]: <-- [7:ATL0M1\r]
: [25100]: --> [2:OK]
: [25100]: MODEM set parity: 7 bits, even parity
: [25100]: MODEM input buffering enabled
: [25100]: <-- [12:AT+FCLASS=0\r]
: [25100]: --> [2:OK]
: [25100]: DIAL 01722278020
: [25100]: <-- [17:ATDT01722278020@\r]
: [25100]: --> [4:BUSY]
: [25100]: PAGE FAILED: Busy signal detected
: [25100]: <-- [5:ATH0\r]
: [25100]: --> [2:OK]: [25100]: MODEM input buffering enabled
: [25100]: MODEM set DTR OFF
: [25100]: SESSION END

Sometimes, I get this instead:

: [25852]: SESSION BEGIN 00001033 491722278020
: [25852]: SEND PAGE: JOB 675 DEST 01722278020 COMMID 00001033
: [25852]: MODEM set DTR OFF
: [25852]: DELAY 2600 ms
: [25852]: MODEM set DTR ON
: [25852]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
: [25852]: MODEM flush i/o
: [25852]: <-- [17:AT&FE0V1Q0S0=0H0\r]
: [25852]: --> [2:OK]
: [25852]: <-- [18:ATS8=2S7=60&D2&C1\r]
: [25852]: --> [2:OK]
: [25852]: <-- [7:ATL0M1\r]
: [25852]: --> [2:OK]
: [25852]: MODEM set parity: 8 bits, no parity
: [25852]: MODEM input buffering enabled
: [25852]: <-- [12:AT+FCLASS=0\r]
: [25852]: --> [2:OK]
: [25852]: DIAL 01722278020
: [25852]: <-- [17:ATDT01722278020@\r]
: [25852]: --> [9:NO ANSWER]
: [25852]: PAGE FAILED: No answer from remote
: [25852]: <-- [5:ATH0\r]
: [25852]: --> [2:OK]
: [25852]: MODEM input buffering enabled
: [25852]: MODEM set DTR OFF
: [25852]: SESSION END



My pagermap looks like this:

#--- Pagermap Start ----
#--- hylafax pagermap /var/spool/fax/etc/pagermap ----
# SMS to D1
0170(.*)        01712521001/49170\1
0171(.*)        01712521001/49171\1

# SMS to E-Plus
0177(.*)        01771167/49177\1

# SMS to D2
0172(.*)        01722278025/0049172\1


Any Ideas ?? Could anybody who got this D2-thingie working send me his
pagermap or any hints why those SMSes fail ??

Thanks & Greetings

Florian




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null