Re: flexfax: FIFO: Device not configured.

[Torsten Mueller <archesoft@archesoft.de>]

Hello,
my 2 cents:
maybe you upgraded to a new kernel ?
i myself installed kernel 2.2.3 and got the same messages from faxaddmodem
(/bin/stty: standard input: unable to perform all requested operations)

a point to look at:
as what  is your serial port definied?
/dev/modem or /dev/cu** or /dev/ttyS**

and then, is there an equivalent FIFO.**** ?

... ,but only my 2 cents ...

greetings Torsten


Eric Smith schrieb:

> Nope tried all that - going for full reinstall from the tar distribution,
>
> Have been getting this ..
> mmm, this looks like a Class 1 modem.
> /bin/stty: standard input: unable to perform all requested operations
> Product code (ATI0) is "5601".
> /bin/stty: standard input: unable to perform all requested operations
> never had this before.
>
> :( oh dear
>
> And it was said by  Andrew DePaula on Tue, Apr 13, 1999 at 01:34:28PM -0800:
> : faxq should be located in /usr/local/sbin ( at lest it is on my system)
> : you'll need to make sure that directory is in your path, or go there before
> : trying to run it. also do a man faxq to be sure you are calling it with the
> : right options.
> :
> : -AD
> :
> : >>> Eric Smith <info@fruitcom.com> 04/13 1:06 PM >>>
> : And it was said by  darren@info.tpc.int on Tue, Apr 13, 1999 at 05:01:28PM +0100:
> : : In message <19990413161459.E12199@fruitcom.com>, Eric Smith writes:
> : : >
> : : >All was well in the Land, I have been using Hylafax for almost two years.
> : : >Then on sendfax, I got this ...
> : : >460 Failed to submit job 234: Unable to open scheduler FIFO: Device not
> : : >configured.
> : :
> : : Looks like faxq was not running. Solution: run it.
> : :
> :
> : Thanx
> :
> : [root@plum /root]# /usr/sbin/faxq
> : never had to do that before to get going ... anyway
> : [root@plum /root]#  sendfax -R -n -d 15124512 /tmp/e
> : 460 Failed to submit job 5: Unable to open scheduler FIFO: Device not
> : configured.
> :
> : ... tried to run
> : [root@plum /root]# faxq
> : /usr/bin/faxq: /var/spool/fax/outgoing: No such file or directory
> : cannot chdir to /var/spool/fax/outgoing...
> :
> : Any more suggestions?
> :
>
> --
> Eric Smith
> <eric@fruitcom.com>
> Tel. 021 236 111