HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem receiving FAX



Hi there..
 
   I'm using Hylafax-4_0pl2-3rh5_i386 under RedHad Linux 5.1 using a GVC 33.6 modem. This is what happens when I try to receive FAX using Hylafax.
 
Mar 02 02:14:34.44: [13546]: SESSION BEGIN 00000009 65022716964
Mar 02 02:14:34.44: [13546]: <-- [4:ATA\r]
Mar 02 02:14:46.88: [13546]: --> [5:+FCON]
Mar 02 02:14:46.88: [13546]: ANSWER: FAX CONNECTION
Mar 02 02:14:46.88: [13546]: RECV FAX: begin
Mar 02 02:14:48.17: [13546]: --> [22:+FDCS: 1,3,0,2,0,0,0,3]
Mar 02 02:14:48.17: [13546]: REMOTE wants 9600 bit/s
Mar 02 02:14:48.17: [13546]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 02:14:48.17: [13546]: REMOTE wants unlimited page length
Mar 02 02:14:48.17: [13546]: REMOTE wants 7.7 line/mm
Mar 02 02:14:48.17: [13546]: REMOTE wants 1-D MR
Mar 02 02:14:50.14: [13546]: --> [2:OK]
Mar 02 02:14:50.14: [13546]: <-- [7:AT+FDR\r]
Mar 02 02:14:51.80: [13546]: --> [5:+FCFR]
Mar 02 02:14:51.80: [13546]: --> [22:+FDCS: 1,3,0,2,0,0,0,3]
Mar 02 02:14:51.80: [13546]: REMOTE wants 9600 bit/s
Mar 02 02:14:51.80: [13546]: REMOTE wants page width 1728 pixels in 215 mm
Mar 02 02:14:51.80: [13546]: REMOTE wants unlimited page length
Mar 02 02:14:51.80: [13546]: REMOTE wants 7.7 line/mm
Mar 02 02:14:51.80: [13546]: REMOTE wants 1-D MR
Mar 02 02:14:52.18: [13546]: --> [7:CONNECT]
Mar 02 02:14:52.18: [13546]: RECV: begin page
Mar 02 02:14:52.18: [13546]: RECV: send trigger 021
Mar 02 02:14:52.18: [13546]: <-- data [1]
Mar 02 02:16:20.07: [13546]: <-- data [1]
Mar 02 02:16:20.07: [13546]: RECV: Missing EOL after 5 seconds
Mar 02 02:16:20.07: [13546]: REMOTE HANGUP: Missing EOL after 5 seconds (section 3.2/T.4) (code 91)
Mar 02 02:16:20.07: [13546]: RECV FAX (00000009): recvq/fax00005.tif from <UNSPECIFIED>, route to <unspecified>, 0 pages in 1:34
Mar 02 02:16:20.08: [13546]: RECV FAX: Missing EOL after 5 seconds (section 3.2/T.4)
Mar 02 02:16:20.08: [13546]: <-- [6:AT+FK\r]
Mar 02 02:16:20.19: [13546]: --> [2:OK]
Mar 02 02:16:20.19: [13546]: RECV FAX (00000009): session with <UNSPECIFIED> terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
Mar 02 02:16:20.19: [13546]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif" "cua1" "
00000009" "Missing EOL after 5 seconds (section 3.2/T.4)"
Mar 02 02:16:20.45: [13546]: RECV FAX: end
Mar 02 02:16:20.45: [13546]: SESSION END
 
 
Do you know what causes this and is there any way to solve it ?? I've been trying to solve this for 2 days.
 
Regards
BSPOH



Project hosted by iFAX Solutions