 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: TPC-OPER: Re: Large number of errors with Hylafax and ZyXEL Omni modem
- To: Shuvam Misra <shuvam@spacenetindia.com>
- Subject: Re: TPC-OPER: Re: flexfax: Large number of errors with Hylafax and ZyXEL Omni modem
- From: "Mr. Arlington Hewes" <tpcadmin@info.tpc.int>
- cc: flexfax@sgi.com, harald.pollack@omv.co.at, tpc-oper@info.tpc.int
- Date: Thu, 02 Apr 1998 23:01:13 +0200
In message <199804022055.CAA21610@home.spacenetindia.com>, Shuvam Misra writes:
>Modem: modem
>Total faxes sent: 6609
>
>Error No Rate/1000
>------------------------------------------------------------------------------
>Busy signal detected 21 3.2
>Failure to train at 2400 bps or +FMINSP value; Giving up aft 9 1.4
>No response to MPS repeated 3 times; Giving up after 3 attem 60 9.1
>Unspecified Transmit Phase B error 2444 369.8
>COMREC error in transmit Phase B/got DCN 2 0.3
>Unable to set session parameters 6 0.9
>DTE to DCE data underflow 1 0.2
>Failure to train at 2400 bps or +FMINSP value; too many atte 1 0.2
>RSPREC error/got DCN 25 3.8
> 1 0.2
>Unspecified Transmit Phase D error, including +FPHCTO timeou 1 0.2
>RSPREC error/got DCN; Giving up after 3 attempts to send sam 8 1.2
>Unspecified Transmit Phase B error; too many attempts to dia 80 12.1
>No response to EOP repeated 3 times; Giving up after 3 attem 6 0.9
>Unknown problem (check modem power) 5 0.8
>Unable to transmit page (giving up after 3 attempts); too ma 1 0.2
>No response to MPS repeated 3 times 123 18.6
>Unable to set session parameters; Giving up after 3 attempts 1 0.2
>Communication failure during Phase B/C; Giving up after 3 at 1 0.2
>Unspecified Transmit Phase D error, including +FPHCTO timeou 4 0.6
>No response to EOP repeated 3 times 4 0.6
>Unable to transmit page (giving up after 3 attempts); Giving 294 44.5
>Job aborted by user 1 0.2
>No local dialtone 167 25.3
>Communication failure during Phase B/C 3 0.5
>Failure to train at 2400 bps or +FMINSP value 43 6.5
>No carrier detected; too many attempts to dial 9 1.4
>High resolution document is not supported by client, image r 1 0.2
>Unspecified Transmit Phase B error; Giving up after 3 attemp 1 0.2
>Document was encoded with 2DMR, but client does not support 1 0.2
>Unable to transmit page (giving up after 3 attempts) 679 102.7
>Call aborted, from +FK or <CAN> 1 0.2
>No carrier detected 1114 168.6
>------------------------------------------------------------------------------
>Total 5118 774.4
For further comparison, here's the stats from two Multitech workhorses on our (only moderately busy) tpc.int cell in the Netherlands:
Modem: sts_ttyC10
Total faxes sent: 33672
Error No Rate/1000
------------------------------------------------------------------------------
Modem protocol error (unknown post-page response) 1 0.0
Failure to train at 2400 bps or +FMINSP value; Giving up aft 1 0.0
No response to MPS repeated 3 times; Giving up after 3 attem 34 1.0
Unspecified Transmit Phase B error; too many attempts to sen 480 14.3
Unspecified Transmit Phase B error 2825 83.9
Busy signal detected 9916 294.5
Can not open document file 2 0.1
DIS/DTC received 3 times; DCS not recognized; Giving up afte 2 0.1
Call aborted, from +FK or <CAN>; too many attempts to send 3 0.1
Unable to set session parameters 8 0.2
COMREC error in transmit Phase B/got DCN 36 1.1
RSPREC error/got DCN; too many attempts to send 3 0.1
Unable to transmit page (NAK with operator intervention) 11 0.3
RSPREC error/got DCN 49 1.5
Invalid response to MPS; Giving up after 3 attempts to send 1 0.0
No response to MPS repeated 3 times; too many attempts to se 15 0.4
RSPREC error/got DCN; Giving up after 3 attempts to send sam 5 0.1
Unable to configure modem for fax use 2 0.1
No answer (T.30 T1 timeout); too many attempts to send 63 1.9
Unknown problem (check modem power) 19 0.6
No response to EOP repeated 3 times; Giving up after 3 attem 11 0.3
COMREC error in transmit Phase B/got DCN; too many attempts 12 0.4
No response to EOP repeated 3 times; too many attempts to se 4 0.1
No response to MPS repeated 3 times 287 8.5
No response to EOP repeated 3 times 14 0.4
Unable to transmit page (giving up after 3 attempts); Giving 16 0.5
COMREC invalid command received/no DIS or DTC 1 0.0
Modem protocol error (unknown post-page response); too many 1 0.0
DIS/DTC received 3 times; DCS not recognized 5 0.1
No local dialtone 8 0.2
Failure to train at 2400 bps or +FMINSP value 6 0.2
Communication failure during Phase B/C 7 0.2
DCS sent 3 times without response 150 4.5
No answer (T.30 T1 timeout) 1672 49.7
Invalid response to MPS 3 0.1
Call aborted, from +FK or <CAN>; Giving up after 3 attempts 3 0.1
Unable to transmit page (giving up after 3 attempts) 28 0.8
High resolution document is not supported by client, image r 24 0.7
Document was encoded with 2DMR, but client does not support 91 2.7
Call aborted, from +FK or <CAN> 51 1.5
Invalid dialing command 10 0.3
DCS sent 3 times without response; Giving up after 3 attempt 23 0.7
DCS sent 3 times without response; too many attempts to send 11 0.3
No carrier detected 2786 82.7
------------------------------------------------------------------------------
Total 18700 555.4
Modem: sts_ttyC11
Total faxes sent: 31356
Error No Rate/1000
------------------------------------------------------------------------------
Failure to train at 2400 bps or +FMINSP value; Giving up aft 1 0.0
No response to MPS repeated 3 times; Giving up after 3 attem 28 0.9
Unspecified Transmit Phase B error; too many attempts to sen 140 4.5
Unspecified Transmit Phase B error 901 28.7
Busy signal detected 13011 414.9
Can not open document file 2 0.1
DIS/DTC received 3 times; DCS not recognized; Giving up afte 1 0.0
COMREC error in transmit Phase B/got DCN 24 0.8
2 0.1
Unable to transmit page (NAK with operator intervention) 4 0.1
RSPREC error/got DCN 31 1.0
No response to MPS repeated 3 times; too many attempts to se 6 0.2
RSPREC error/got DCN; Giving up after 3 attempts to send sam 9 0.3
Unable to configure modem for fax use 5 0.2
No answer (T.30 T1 timeout); too many attempts to send 17 0.5
Unknown problem (check modem power) 4 0.1
No response to EOP repeated 3 times; Giving up after 3 attem 5 0.2
COMREC error in transmit Phase B/got DCN; too many attempts 6 0.2
No response to EOP repeated 3 times; too many attempts to se 3 0.1
No response to MPS repeated 3 times 196 6.3
Job aborted by user 1 0.0
No response to EOP repeated 3 times 7 0.2
Unable to transmit page (giving up after 3 attempts); Giving 3 0.1
DIS/DTC received 3 times; DCS not recognized 2 0.1
No local dialtone 513 16.4
Failure to train at 2400 bps or +FMINSP value 4 0.1
Communication failure during Phase B/C 2 0.1
DCS sent 3 times without response 144 4.6
No answer (T.30 T1 timeout) 720 23.0
Invalid response to MPS 1 0.0
Unable to transmit page (giving up after 3 attempts) 22 0.7
High resolution document is not supported by client, image r 15 0.5
Document was encoded with 2DMR, but client does not support 64 2.0
No answer from remote 2107 67.2
Call aborted, from +FK or <CAN> 5 0.2
Invalid dialing command 22 0.7
DCS sent 3 times without response; Giving up after 3 attempt 30 1.0
DCS sent 3 times without response; too many attempts to send 4 0.1
No carrier detected 201 6.4
------------------------------------------------------------------------------
Total 18263 582.4
As I see it, if you ignore the 'Busy Signal Detected' result codes, the MT modems are vastly superior _WITH_HYLAFAX_AND_AS_CONFIGURED.
-DPN
--
Mr. Arlington Hewes (tpcadmin@info.tpc.int)
The TPC.INT Subdomain (http://www.tpc.int/)
**************************************************
*** FOR GENERAL INFORMATION ***
*** Mail to tpcfaq@info.tpc.int ***
*** FOR A LIST OF CURRENT COVERAGE ***
*** Mail to tpccover@info.tpc.int ***
**************************************************
- Prev by Date: Re: Large number of errors with Hylafax and ZyXEL Omni modem
- Next by Date: Re: Large number of errors with Hylafax and ZyXEL Omni modem
- Prev by thread: @ form of dialling problem
- Next by thread: Re: TPC-OPER: Re: Large number of errors with Hylafax and ZyXEL Omni modem
- Index(es):
Project hosted by iFAX Solutions