User:Mdababi
Hello, Im trying to configure Hylafax to get the callID nuumber. The problem is that some digits are missing. For example when I compose "123456" I get "13456" or "12456"... My configuration is
CountryCode: 1
AreaCode: 415
FAXNumber: 123
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 0xFFF
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "FAX"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
ModemType: Class1 # use this to supply a hint ModemRate: 57600 # rate for DCE-DTE communication ModemFlowControl: rtscts # RTS/CTS flow control assumed ModemSoftFlowCmd: AT\Q1 # set desired flow control method ModemHardFlowCmd: AT\Q3 # set desired flow control method ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier ModemDialCmd: ATDT%s
ModemMfrQueryCmd: AT+FMFR? ModemModelQueryCmd: AT+FMDL? ModemRevQueryCmd: AT+FREV?
Class1PPMWaitCmd: "<delay\0727>" # \072 == : to avoid awk problem Class1TCFWaitCmd: "<delay\0727>" Class1EOPWaitCmd: "<delay\0729>" Class1SwitchingCmd: "<delay\0727>" # assumption: +FRS not supported
CallIDPattern: "DAD: " CallIDAnswerLength: 20 CallIDPattern: "CID: " CallIDAnswerLength: 20
- ModemRingsBeforeResponse: 0
ModemRingResponse: AT+FCLASS=8;+VLS=1 # Not sure where I got this CallIDPattern: SHIELDED_DTMF CallIDAnswerLength: 20 ModemAnswerCmd: <delay:75>AT+FCLASS=1;A thanks for your help Dababi