HylaFAX The world's most advanced open source fax server |
Thanks, I really
appreciate your help, yes I like if you can help me with this, im noob in this
matter. The scenario you describe is the correct, in the past the setup
work as you describe. Now we have a physical another equipment but is the same model 3COM
NBX-100, we have a backup of the old dial plan. I want to confirm the T1 CARD I
have tell you, that work?. Thanks Amaury Medina Administrador de Redes Telf. (809) 560-2525
Ext. 2277 Fax (809) 564-2251 Cel. (809) 754-1470 amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx P Antes de imprimir este correo piensa bien si
es necesario hacerlo, el medio ambiente es cosa de todos. De: Robert Branham
[mailto:bbranham@xxxxxxxxxxxx] Same plan would
still work. Your NBX must have dialplan rules pointing inbound fax DID
numbers to the channel extensions of the NBXàhylafax T1 card which in turn should be able to be attached to
the T1 card in the hylafax box. As long as the NBX has not been tampered
with all of those dialplan rules are probably still in place otherwise I would
be glad to work with you offline to work through that. Thank You
Robert Branham
President Branham IT
Solutions LLC 314-565-7582
Website www.bits-stl.com Linkedin www.linkedin.com/in/bobbranham
Yelp www.yelp.com/biz/branham-it-solutions-llc-high-ridge
From: Amaury Medina
[mailto:amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx] I have wrote
something wrong, the setup we have is the following. 2 T1’s Card
installaed in a 3com NBX 100 one for Voice and other one connect the hylafax
and the NBX T1 -1 -à 3COM 3COM -2-à Hylafax box Sorry for the
wrong information earlier, and thanks for fast response. Amaury Medina Administrador de Redes Telf. (809) 560-2525
Ext. 2277 Fax (809) 564-2251
Cel. (809) 754-1470
amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx P Antes de imprimir este correo piensa bien si
es necesario hacerlo, el medio ambiente es cosa de todos. De:
hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] En
nombre de Robert Branham That card will
for you as stated by other users by using the following procedure detailed in
this link: http://www.voip-info.org/wiki/view/Asterisk+IAXmodem
Thank You
Robert Branham
President Branham IT
Solutions LLC 314-565-7582
Website www.bits-stl.com Linkedin www.linkedin.com/in/bobbranham
Yelp www.yelp.com/biz/branham-it-solutions-llc-high-ridge
From: Amaury Medina
[mailto:amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx] Hi, thanks for
the response, let me explain a little better, I’m not a “3com PBX certified
technician”, neither I have work with hylafax in the past, that’s why I’
looking for this information, I start working in old company in the
network admin seat, the administration of the 3com NBX was not part of my
duties, right now In the new company I have others responsabilites,
(network admin, server admin), now we have another goal for the new
company because we are part of a group of Companies. That’s why I
want to try to setup the same we have before, so we can provide service for the
others companies. The old setup
is as you say: 2 T1’s one for
Voice and 1 for fax T1 -1 -à 3COM T1 -2-à Hylafax box I ask the old
Boss and he says the T1 card in the old Hylafax Box was a simply T1 Card,
that’s why I ask if the following model can work for me, it’s very cheap te110p. Thanks for the
response, and sorry for my bad English. Greetings from
Dominican Republic. Amaury Medina Administrador de Redes Telf. (809) 560-2525
Ext. 2277 Fax (809) 564-2251
Cel. (809) 754-1470
amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx P Antes de imprimir este correo piensa bien si
es necesario hacerlo, el medio ambiente es cosa de todos. De: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] En nombre de Robert Branham Being a hylafax
user and a 3com pbx certified technician this combination leaves me a bit
stumped. Which 3com PBX do you have, the NBX of VCX? Neither of
them really have T1 pass-thru capabilities directly. Do you have 2 T1’s
one for Voice and 1 for fax? Then this makes sense. T1 -1 -à 3COM T1 -2-à Hylafax box Otherwise there
would need to be some other channel bank type device before the pbx and hylafax
to split the T1 into channels for each to use. Thank You
Robert Branham
President Branham IT
Solutions LLC 314-565-7582
Website www.bits-stl.com Linkedin www.linkedin.com/in/bobbranham
Yelp www.yelp.com/biz/branham-it-solutions-llc-high-ridge
From: Amaury Medina
[mailto:amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx] Hi, it’s my first time using
a mail list, I want to setup a hylafax server with a T1 card for use with our
existing T1 VOICE LINE. In the past we have the
following setup: T1 LINE =è 3COM PBX =è HYLAFAX SERVER. The company divided and the
old BOSS tock the old Hylafax server, now I want to build the same setup
because it was working great. I need your help to identify
what components I need, Hardware and Software, I new in the linux world but I
know I can do it whit the correct advice. I was checking the followind
T1 CARD te110p I don’t now If I can user this card. Well, thanks for all.
Waiting for your response.
Amaury Medina Administrador
de Redes Telf. (809) 560-2525
Ext. 2277 Fax (809) 564-2251
Cel. (809) 754-1470
amedina@xxxxxxxxxxxxxxxxxxxxxxxxxx P
Antes de imprimir este correo piensa bien si es necesario hacerlo,
el medio ambiente es cosa de todos. |