![]() |
I'm receiving incomplete faxes from one number: TDM->VoiP->Hylafax . IAXmodem's version is 1.2.0 .
Sep 28 08:57:16.36: [ 2003]: <-- [10:AT+FRM=96\r]
Sep 28 08:57:16.66: [ 2003]: --> [7:CONNECT]
Sep 28 08:57:16.76: [ 2003]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 28 08:57:16.76: [ 2003]: RECV: TCF 127 bytes, 17% non-zero, 105 zero-run
Sep 28 08:57:16.76: [ 2003]: RECV: reject TCF (too many non-zero, max 10%)
Sep 28 08:57:16.76: [ 2003]: RECV: reject TCF (zero run too short, min 1200)
Sep 28 08:57:16.76: [ 2003]: --> [10:NO CARRIER]
Sep 28 08:57:23.30: [ 2003]: <-- [10:AT+FRM=96\r]
Sep 28 08:57:23.60: [ 2003]: --> [7:CONNECT]
Sep 28 08:57:25.12: [ 2003]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Sep 28 08:57:25.12: [ 2003]: RECV: TCF 1825 bytes, 1% non-zero, 1800 zero-run
Sep 28 08:57:25.12: [ 2003]: --> [10:NO CARRIER]
Sep 28 08:57:26.26: [ 2003]: <-- [10:AT+FRM=96\r]
Sep 28 08:57:26.90: [ 2003]: --> [7:CONNECT]
Sep 28 08:57:26.90: [ 2003]: MODEM input buffering enabled
Sep 28 08:57:26.90: [ 2003]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
Sep 28 08:57:26.90: [ 2003]: RECV: begin page
Sep 28 08:57:33.72: [ 2003]: RECV/CQ: Invalid WhiteTable code word, row 232, x 362
Sep 28 08:57:33.72: [ 2003]: RECV/CQ: Bad 1D pixel count, row 232, got 362, expected 1728
Sep 28 08:57:33.72: [ 2003]: RECV/CQ: Adjusting for trailing noise (1 run)
Sep 28 08:57:33.72: [ 2003]: RECV: 232 total lines, 0 bad lines, 1 consecutive bad lines
Sep 28 08:57:33.72: [ 2003]: RECV: end page
Sep 28 08:57:33.72: [ 2003]: --> [10:NO CARRIER]
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*