Re: [hylafax-users] Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP (rev 01)

[John Hudak <jjhudak@xxxxxxxxx>]

I would look at the chips and search the net for a data sheet, or an article that discusses that chips capabilities...

John

On Wed, Sep 22, 2010 at 1:44 AM, ranjan <ranjan.das@xxxxxxxxxxxxxxxxx> wrote:

Hi all

I have a internal PCI modem with the conexant chipset.

The lspci -v outputs the modem as follows


> 04:06.0 Communication controller: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP (rev 01)
>       Subsystem: Conexant Systems, Inc. Device 205d
>       Flags: bus master, medium devsel, latency 32, IRQ 11
>       Memory at ff700000 (32-bit, non-prefetchable) [size=64K]
>       I/O ports at d000 [size=8]
>       Capabilities: [40] Power Management version 2

How can i know whether this modem supports Adaptive Answer Technology so
that i can differentiate the voice and fax calls.

As this is identified as a Class 1.0 Modem , how can i differentiate the
voice and fax calls and also how can i handle/divert the voice calls to
the Telephone Equipment connected to the other port of the pci modem?

Thank you.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*