Re: [hylafax-users] Hylafax 5.1.7: Email FAX Output by FAX No

["Lee, John (Sydney)" <John.Lee@xxxxxxxxxxxxx>]

Thanks Lee.

Actually, I am using an analog line from Rhino Channel Bank which piggy
back from an ISDN line connected to an Asterisk box.

Any thoughts? 

> -----Original Message-----
> From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
> Sent: Tuesday, 14 September 2010 3:12 PM
> To: Lee, John (Sydney)
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Hylafax 5.1.7: Email FAX Output by FAX No
> 
> Lee, John (Sydney) wrote:
> > Thanks Lee.
> > I may not have explained it properly.
> >
> > I have programmed my PABX such that Telno B will be forwarded to
Telno
> > A.
> > Telno A is connected to a modem attached to Hylafax server.
> > So the modem is receiving faxes if people fax to Telno A or B.
> >
> > However, I want to be able to differentiate faxes sending to Telno A
> > from Telno B.  I thought I should use $CALLERID but didn't work.
> >
> > Any thoughts?
> 
> $CALLERID is the caller's number.  The dialed number (DID) is lost in
> your configuration unless the modem is specifically capable of
receiving
> DID signal from the PABX and reporting it to HylaFAX.
> 
> If, for example, you're using iaxmodems with the typical
configuration,
> then you'd refer to $CALLID4.
> 
> Thanks,
> 
> Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*