Re: [hylafax-users] Reducing fax sending speed with hylfax and iaxmodem

[Matthieu Patou <mat+informatique.hylafax@xxxxxxxxx>]

 On 17/08/2010 04:37, Lee Howard wrote:
> Matthieu Patou wrote:
> > I'm working in Russia, and the quality of the line in somecase is not 
> > good enough for 9600 bit/s for transfer speed.
> > Normaly the faxes should adapt and reduce the speed, but 
> > unfortunately it seem not to be the case here.
> >
> > So I'm trying to use Class1TMQueryCmd to slow down, with something 
> > like this:
> >
> > Class1TMQueryCmd: "!24,48,72,!96"
> >
> > But I get this error message: FaxGetty[3913]: Error parsing "+FRM" 
> > query response: "OK"
> >
> > Is there any other way ? 
>
> Class1TMQueryCmd: "!24,48".
>
> But something is really wrong if you can't use V.29 (9600 bps).
Well it's russia, when you are faxing or faxing to far east your easily 
hear noise (for instance the distinctive sound of a fax is not so 
distinctive).

And having Class1RMQueryCmd: "!24,48,72,96"  will forbid me to try to go 
to 14.400 (v17) right ?


Matthieu.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*