Re: [hylafax-users] Reducing fax sending speed with hylfax and iaxmodem

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Matthieu Patou wrote:
>  On 17/08/2010 04:37, Lee Howard wrote:
> > Matthieu Patou wrote:
> > > I'm working in Russia, and the quality of the line in somecase is 
> > > not good enough for 9600 bit/s for transfer speed.
> > > Normaly the faxes should adapt and reduce the speed, but 
> > > unfortunately it seem not to be the case here.
> > >
> > > So I'm trying to use Class1TMQueryCmd to slow down, with something 
> > > like this:
> > >
> > > Class1TMQueryCmd: "!24,48,72,!96"
> > >
> > > But I get this error message: FaxGetty[3913]: Error parsing "+FRM" 
> > > query response: "OK"
> > >
> > > Is there any other way ? 
> >
> > Class1TMQueryCmd: "!24,48".
> >
> > But something is really wrong if you can't use V.29 (9600 bps).
> Well it's russia, when you are faxing or faxing to far east your 
> easily hear noise (for instance the distinctive sound of a fax is not 
> so distinctive).
>
> And having Class1RMQueryCmd: "!24,48,72,96"  will forbid me to try to 
> go to 14.400 (v17) right ?

Correct.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*