Re: [hylafax-users] no auto answer

[Mohammad Abravi <lamp.mia@xxxxxxxxx>]

Hi

faxanswer ttySHSF0 working but auto answer with 1 ring not work, what?

my modem : HSF

my config:

CountryCode:            1

AreaCode:               415

FAXNumber:              +1

LongDistancePrefix:     1

InternationalPrefix:    011

DialStringRules:        etc/dialrules

ServerTracing:          1

SessionTracing:         11

RecvFileMode:           0664

LogFileMode:            0664

DeviceMode:             0666

RingsBeforeAnswer:      1

SpeakerVolume:          high

GettyArgs:              "-h %l dx_%s"

LocalIdentifier:        LAMP

TagLineFont:            etc/lutRS18.pcf

TagLineFormat:          "From %%l|%c|Page %%P of %%T"

MaxRecvPages:           25

#

#

# Modem-related stuff: should reflect modem command interface

# and hardware connection/cabling (e.g. flow control).

#

ModemType:              Class1          # use this to supply a hint

ModemRate:              19200           # rate for DCE-DTE communication

ModemFlowControl:       rtscts          # default

#

ModemNoFlowCmd:         AT&K0           # setup no flow control

ModemHardFlowCmd:       AT&K3           # setup hardware flow control

ModemSoftFlowCmd:       AT&K4           # setup software flow control

ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem

ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)

#

ModemMfrQueryCmd:       !Rockwell

ModemModelQueryCmd:     !RC288DPi

ModemRevQueryCmd:       ATI3            # product information

#

ModemDialCmd:           ATDT%s          # T for tone dialing