[hylafax-users] Partial Page Output after Ubuntu upgrade

["Dan Heitbohmer" <dan@xxxxxxxxxxxxx>]

Hi,

 

I am running Hylafax 6.0.3 in ubuntu 10.04.

 

After upgrading from Ubuntu 9.10 -> 10.04, Hylafax is completing the call and sending the PDF coverpage, almost.

 

The receiving fax machine is only producing the fax header and maybe 5 millimeters of the pdf as output. I have tried many PDF’s that successfully transmitted in the old installation with the same result.

 

This is a sample of the command I am running (dummy content):

/usr/bin/sendfax -R -n -o 'Testfax' -f 'someone@xxxxxxxxxxxxx' -d 'Testfax'@'5555555555' '/var/www/faxserver/modules/5555555555.pdf'

 

The card is a Mainpine RF5122TL IQ Express 4 Port card and I have tried class 1 – 2.1 with the default Hylafax configurations.

 

Here is the log output:

 

Jun 02 13:12:44.48: [ 4335]: SESSION BEGIN 000000002 15195555555555

Jun 02 13:12:44.48: [ 4335]: HylaFAX (tm) Version 6.0.3

Jun 02 13:12:44.48: [ 4335]: SEND FAX: JOB 2 DEST 5555555555 COMMID 000000002 DEVICE '/dev/ttyS4' FROM 'dan <someone@xxxxxxxxxxxxx>' USER Testfax

Jun 02 13:12:44.48: [ 4335]: <-- [9:AT+FLO=2\r]

Jun 02 13:12:44.50: [ 4335]: --> [2:OK]

Jun 02 13:12:44.50: [ 4335]: <-- [9:AT+FPP=0\r]

Jun 02 13:12:44.52: [ 4335]: --> [2:OK]

Jun 02 13:12:44.52: [ 4335]: <-- [9:AT+FBO=0\r]

Jun 02 13:12:44.54: [ 4335]: --> [2:OK]

Jun 02 13:12:44.54: [ 4335]: <-- [10:AT+FCT=30\r]

Jun 02 13:12:44.56: [ 4335]: --> [2:OK]

Jun 02 13:12:44.56: [ 4335]: <-- [15:AT+FNR=1,1,1,1\r]

Jun 02 13:12:44.58: [ 4335]: --> [2:OK]

Jun 02 13:12:44.58: [ 4335]: <-- [13:AT+FAP=1,1,1\r]

Jun 02 13:12:44.60: [ 4335]: --> [2:OK]

Jun 02 13:12:44.60: [ 4335]: <-- [9:AT+FIE=0\r]

Jun 02 13:12:44.61: [ 4335]: --> [2:OK]

Jun 02 13:12:44.61: [ 4335]: <-- [26:AT+FCC=7F,D,2,2,F,1,0,0,0\r]

Jun 02 13:12:44.62: [ 4335]: --> [2:OK]

Jun 02 13:12:44.62: [ 4335]: DIAL 5555555555

Jun 02 13:12:44.62: [ 4335]: <-- [15:ATDT5555555555\r]

Jun 02 13:13:17.02: [ 4335]: --> [4:+FCO]

Jun 02 13:13:17.02: [ 4335]: --> [37:+FNF:00 00 56 55 55 00 8C 90 80 17 0B]

Jun 02 13:13:17.02: [ 4335]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 17 0B"

Jun 02 13:13:17.02: [ 4335]: NSF remote fax equipment: Brother MFC-3100C/MFC-8600

Jun 02 13:13:17.19: [ 4335]: --> [27:+FCI:"          5555555555"]

Jun 02 13:13:17.19: [ 4335]: REMOTE CSI "5555555555"

Jun 02 13:13:17.31: [ 4335]: --> [31:+FIS:03,08,00,02,03,01,00,04,03]

Jun 02 13:13:17.31: [ 4335]: --> [2:OK]

Jun 02 13:13:17.31: [ 4335]: REMOTE best rate 21600 bit/s

Jun 02 13:13:17.31: [ 4335]: REMOTE max A4 page width (215 mm)

Jun 02 13:13:17.31: [ 4335]: REMOTE max unlimited page length

Jun 02 13:13:17.31: [ 4335]: REMOTE best vres 15.4 line/mm

Jun 02 13:13:17.31: [ 4335]: REMOTE format support: MH, MR, MMR, JPEG Full-Color

Jun 02 13:13:17.31: [ 4335]: REMOTE supports T.30 Annex A, 256-byte ECM

Jun 02 13:13:17.31: [ 4335]: REMOTE best 20 ms, 10 ms/scanline

Jun 02 13:13:17.31: [ 4335]: USE 21600 bit/s

Jun 02 13:13:17.31: [ 4335]: USE error correction mode

Jun 02 13:13:17.31: [ 4335]: SEND file "docq/doc2.pdf;f0"

Jun 02 13:13:17.31: [ 4335]: USE A4 page width (215 mm)

Jun 02 13:13:17.31: [ 4335]: USE unlimited page length

Jun 02 13:13:17.31: [ 4335]: USE 3.85 line/mm

Jun 02 13:13:17.31: [ 4335]: USE 2-D MMR

Jun 02 13:13:17.31: [ 4335]: USE 0 ms/scanline

Jun 02 13:13:17.31: [ 4335]: <-- [25:AT+FIS=0,8,0,2,3,1,0,0,0\r]

Jun 02 13:13:17.32: [ 4335]: --> [2:OK]

Jun 02 13:13:17.32: [ 4335]: <-- [7:AT+FDT\r]

Jun 02 13:13:17.83: [ 4335]: --> [31:+FCS:00,08,00,02,03,01,00,00,00]

Jun 02 13:13:18.20: [ 4335]: --> [7:CONNECT]

Jun 02 13:13:18.20: [ 4335]: SEND begin page

Jun 02 13:13:18.20: [ 4335]: <-- data [567]

Jun 02 13:13:18.20: [ 4335]: SENT 558 bytes of data

Jun 02 13:13:18.20: [ 4335]: SEND end page

Jun 02 13:13:18.20: [ 4335]: SEND send EOP (no more pages or documents)

Jun 02 13:13:18.20: [ 4335]: <-- data [2]

Jun 02 13:13:20.62: [ 4335]: --> [7:+FHS:00]

Jun 02 13:13:20.62: [ 4335]: REMOTE HANGUP: Normal and proper end of connection (code 0)

Jun 02 13:13:21.72: [ 4335]: --> [2:OK]

Jun 02 13:13:21.72: [ 4335]: SEND recv MCF (message confirmation)

Jun 02 13:13:21.72: [ 4335]: SEND FAX (000000002): FROM someone@xxxxxxxxxxxxx TO 5555555555 (page 1 of 1 sent in 0:00:04)

Jun 02 13:13:21.72: [ 4335]: SEND FAX (000000002): FROM someone@xxxxxxxxxxxxx TO 5555555555 (docq/doc2.pdf;f0 sent in 0:00:04)

Jun 02 13:13:22.72: [ 4335]: <-- [5:ATH0\r]

Jun 02 13:13:22.89: [ 4335]: --> [2:OK]

 

Any help would be greatly appreciated.

 

Thanks,

 

Dan