Re: [hylafax-users] Blank Pages when Receiving a Fax

[Paul_Malone@xxxxxxxxxxxxxxxxx]

The content of the log is listed below.

Thanks for your help,

===============================================================================================================
Apr 30 15:36:23.81: [ 5893]: SESSION
BEGIN 000000024 18009991111
Apr 30 15:36:23.81: [ 5893]: HylaFAX
(tm) Version 6.0.4
Apr 30 15:36:23.81: [ 5893]: <--
[13:AT+FCLASS=1A\r]
Apr 30 15:36:29.40: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:29.40: [ 5893]: ANSWER:
FAX CONNECTION  DEVICE '/dev/ttyS1'
Apr 30 15:36:29.40: [ 5893]: RECV FAX:
begin
Apr 30 15:36:29.40: [ 5893]: <--
data [32]
Apr 30 15:36:29.40: [ 5893]: <--
data [2]
Apr 30 15:36:29.56: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:29.56: [ 5893]: <--
data [23]
Apr 30 15:36:29.56: [ 5893]: <--
data [2]
Apr 30 15:36:30.28: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:30.28: [ 5893]: <--
data [13]
Apr 30 15:36:30.28: [ 5893]: <--
data [2]
Apr 30 15:36:32.55: [ 5893]: -->
[2:OK]
Apr 30 15:36:32.55: [ 5893]: <--
[9:AT+FRH=3\r]
Apr 30 15:36:33.43: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:34.40: [ 5893]: -->
[2:OK]
Apr 30 15:36:34.40: [ 5893]: RECV recv
DCS (command signal)
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants 14400 bit/s
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants A4 page width (215 mm)
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants unlimited page length
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants 3.85 line/mm
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants 2-D MMR
Apr 30 15:36:34.40: [ 5893]: REMOTE
wants T.30 Annex A, 256-byte ECM
Apr 30 15:36:34.40: [ 5893]: RECV training
at v.17 14400 bit/s
Apr 30 15:36:34.40: [ 5893]: <--
[11:AT+FRM=145\r]
Apr 30 15:36:36.10: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:37.66: [ 5893]: RECV:
TCF 2812 bytes, 2% non-zero, 2744 zero-run
Apr 30 15:36:37.67: [ 5893]: -->
[10:NO CARRIER]
Apr 30 15:36:37.67: [ 5893]: DELAY
70 ms
Apr 30 15:36:37.74: [ 5893]: TRAINING
succeeded
Apr 30 15:36:37.74: [ 5893]: <--
[9:AT+FTH=3\r]
Apr 30 15:36:37.94: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:37.94: [ 5893]: <--
data [3]
Apr 30 15:36:37.94: [ 5893]: <--
data [2]
Apr 30 15:36:39.11: [ 5893]: -->
[2:OK]
Apr 30 15:36:39.11: [ 5893]: <--
[11:AT+FRM=146\r]
Apr 30 15:36:40.01: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:40.43: [ 5893]: RECV received
frame number 0
Apr 30 15:36:40.57: [ 5893]: RECV received
frame number 1
Apr 30 15:36:40.57: [ 5893]: RECV received
RCP frame
Apr 30 15:36:41.02: [ 5893]: -->
[10:NO CARRIER]
Apr 30 15:36:41.02: [ 5893]: <--
[9:AT+FRH=3\r]
Apr 30 15:36:41.43: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:41.92: [ 5893]: -->
[2:OK]
Apr 30 15:36:41.92: [ 5893]: RECV recv
PPS (partial page signal)
Apr 30 15:36:41.92: [ 5893]: RECV recv
MPS (more pages, same document)
Apr 30 15:36:41.92: [ 5893]: RECV received
2 frames of block 1 of page 1
Apr 30 15:36:41.93: [ 5893]: RECV:
464 bytes of data, 1068 total lines
Apr 30 15:36:41.93: [ 5893]: DELAY
70 ms
Apr 30 15:36:42.00: [ 5893]: RECV send
MCF (message confirmation)
Apr 30 15:36:42.00: [ 5893]: <--
[9:AT+FTH=3\r]
Apr 30 15:36:42.19: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:42.19: [ 5893]: RECV FAX
(000000024): from <UNSPECIFIED>, page 1 in 0:00:12, INF, 3.85 line/mm,
2-D MMR, 14400 bit/s
Apr 30 15:36:42.19: [ 5893]: <--
data [3]
Apr 30 15:36:42.19: [ 5893]: <--
data [2]
Apr 30 15:36:43.37: [ 5893]: -->
[2:OK]
Apr 30 15:36:43.37: [ 5893]: <--
[11:AT+FRM=146\r]
Apr 30 15:36:44.26: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:44.68: [ 5893]: RECV received
frame number 0
Apr 30 15:36:44.82: [ 5893]: RECV received
frame number 1
Apr 30 15:36:44.82: [ 5893]: RECV received
frame number 2
Apr 30 15:36:44.89: [ 5893]: RECV received
RCP frame
Apr 30 15:36:44.92: [ 5893]: -->
[10:NO CARRIER]
Apr 30 15:36:44.92: [ 5893]: <--
[9:AT+FRH=3\r]
Apr 30 15:36:45.43: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:46.22: [ 5893]: -->
[2:OK]
Apr 30 15:36:46.22: [ 5893]: RECV recv
PPS (partial page signal)
Apr 30 15:36:46.22: [ 5893]: RECV recv
EOP (no more pages or documents)
Apr 30 15:36:46.22: [ 5893]: RECV received
3 frames of block 1 of page 2
Apr 30 15:36:46.23: [ 5893]: RECV:
567 bytes of data, 1071 total lines
Apr 30 15:36:46.23: [ 5893]: DELAY
70 ms
Apr 30 15:36:46.30: [ 5893]: RECV send
MCF (message confirmation)
Apr 30 15:36:46.30: [ 5893]: <--
[9:AT+FTH=3\r]
Apr 30 15:36:46.49: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:46.49: [ 5893]: <--
data [3]
Apr 30 15:36:46.49: [ 5893]: <--
data [2]
Apr 30 15:36:47.67: [ 5893]: -->
[2:OK]
Apr 30 15:36:47.67: [ 5893]: <--
[9:AT+FRH=3\r]
Apr 30 15:36:48.63: [ 5893]: -->
[7:CONNECT]
Apr 30 15:36:49.35: [ 5893]: -->
[2:OK]
Apr 30 15:36:49.35: [ 5893]: RECV recv
DCN (disconnect)
Apr 30 15:36:49.35: [ 5893]: RECV FAX
(000000024): from <UNSPECIFIED>, page 2 in 0:00:05, INF, 3.85 line/mm,
2-D MMR, 14400 bit/s
Apr 30 15:36:49.35: [ 5893]: RECV FAX
(000000024): recvq/fax000000006.tif from <UNSPECIFIED>, route to
<unspecified>, 2 pages in 0:00:20
Apr 30 15:36:49.35: [ 5893]: RECV FAX:
bin/faxrcvd "recvq/fax000000006.tif" "ttyS1" "000000024"
""
Apr 30 15:36:49.36: [ 5893]: RECV FAX:
end
Apr 30 15:36:49.36: [ 5893]: SESSION
END
===============================================================================================================

From:	Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
To:	Paul_Malone@xxxxxxxxxxxxxxxxx
Cc:	hylafax-users@xxxxxxxxxxx
Date:	04/30/2010 09:09 PM
Subject:	Re: [hylafax-users] Blank Pages when Receiving a Fax

---

Paul_Malone@xxxxxxxxxxxxxxxxx wrote:
>
> I am trying to set up HylaFAX version 6.0.4.  I can successfully
send 
> faxes, but when I receive a fax I get one page for each page sent
that 
> is blank except for one line at the top of the page that looks 
> something like this:
>
> APR-30-2010  14:28     USGOV        
                     
            
>                    
                     
               P.01/02
>
>
> What have I failed to setup or which files have I most likely 
> configured incorrectly?

Show us the associated session log.

Thanks,

Lee.




---------------------------------------------------------------------------------

Confidentiality Notice: This message is the property of the United States
Bankruptcy Court for the Western District of Kentucky. It may be legally
privileged and/or confidential and is intended solely for the use of the
addressee. If the reader of this message is not the intended recipient,
you are hereby notified that any unauthorized disclosure, dissemination,
distribution, copying or taking any action in reliance on the information
contained herein is strictly prohibited. If you have received this message
in error, please immediately notify the sender and delete this message.