[hylafax-users] Three attemps, three different errors (or not?)

[Bernardo Volpi <bernardo.volpi@xxxxxxxxxxxxxxxxx>]

Hi,

still me... now I tried 3 automatic attemps to another destination, and i got 3 different errors!

I put here first and last lines, but if you think you need some other information I'll be happy to share it with you!

Thanks!

Bernardo



FIRST:
apr 28 11:32:50.41: [ 9639]: SESSION BEGIN 000000437 3966505125
apr 28 11:32:50.41: [ 9639]: HylaFAX (tm) Version 6.0.3
apr 28 11:32:50.41: [ 9639]: SEND FAX: JOB 2 DEST 066505125 COMMID 000000437 DEVICE '/dev/ttyS1' FROM 'benfox <bernardo.volpi@xxxxxxxxxxxxxxxxx>' USER publica
apr 28 11:32:50.41: [ 9639]: <-- [12:AT+FCLASS=1\r]
apr 28 11:32:50.55: [ 9639]: --> [2:OK]
apr 28 11:32:50.55: [ 9639]: DIAL 066505125
apr 28 11:32:50.55: [ 9639]: <-- [14:ATDT066505125\r]
apr 28 11:33:12.36: [ 9639]: --> [7:CONNECT]
apr 28 11:33:12.83: [ 9639]: --> [5:ERROR]
apr 28 11:33:12.83: [ 9639]: MODEM Command error
apr 28 11:33:12.83: [ 9639]: FCS error
apr 28 11:33:12.83: [ 9639]: <-- [10:AT+FRS=21\r]
apr 28 11:33:13.05: [ 9639]: --> [2:OK]
apr 28 11:33:13.05: [ 9639]: <-- [9:AT+FTH=3\r]
apr 28 11:33:13.26: [ 9639]: --> [7:CONNECT]
apr 28 11:33:13.26: [ 9639]: <-- data [3]
apr 28 11:33:13.26: [ 9639]: <-- data [2]
apr 28 11:33:14.51: [ 9639]: --> [2:OK]
apr 28 11:33:14.51: [ 9639]: SEND send CRP (command repeat)
apr 28 11:33:14.51: [ 9639]: <-- [9:AT+FRH=3\r]
apr 28 11:33:54.51: [ 9639]: --> [0:]
apr 28 11:33:54.51: [ 9639]: MODEM <Empty line>
apr 28 11:33:54.51: [ 9639]: <-- data [1]
apr 28 11:33:54.52: [ 9639]: --> [2:OK]
apr 28 11:33:54.52: [ 9639]: No receiver protocol (T.30 T1 timeout)
apr 28 11:33:54.52: [ 9639]: SEND FAILED: JOB 2 DEST 066505125 ERR [126] No receiver protocol (T.30 T1 timeout)
apr 28 11:33:54.52: [ 9639]: <-- [9:AT+FRS=7\r]
apr 28 11:33:54.59: [ 9639]: --> [2:OK]
apr 28 11:33:54.59: [ 9639]: <-- [9:AT+FTH=3\r]
apr 28 11:33:54.80: [ 9639]: --> [7:CONNECT]
apr 28 11:33:54.80: [ 9639]: <-- data [3]
apr 28 11:33:54.80: [ 9639]: <-- data [2]
apr 28 11:33:56.05: [ 9639]: --> [2:OK]
apr 28 11:33:57.05: [ 9639]: <-- [5:ATH0\r]
apr 28 11:33:57.17: [ 9639]: --> [2:OK]
apr 28 11:33:57.17: [ 9639]: SESSION END

SECOND:
apr 28 11:35:06.35: [ 9663]: SESSION BEGIN 000000438 3966505125
apr 28 11:35:06.35: [ 9663]: HylaFAX (tm) Version 6.0.3
apr 28 11:35:06.35: [ 9663]: SEND FAX: JOB 2 DEST 066505125 COMMID 000000438 DEVICE '/dev/ttyS1' FROM 'benfox <bernardo.volpi@xxxxxxxxxxxxxxxxx>' USER publica
apr 28 11:35:06.35: [ 9663]: <-- [12:AT+FCLASS=1\r]
apr 28 11:35:06.49: [ 9663]: --> [2:OK]
apr 28 11:35:06.49: [ 9663]: DIAL 066505125
apr 28 11:35:06.49: [ 9663]: <-- [14:ATDT066505125\r]
apr 28 11:35:28.57: [ 9663]: --> [7:CONNECT]
apr 28 11:35:29.59: [ 9663]: --> [2:OK]
apr 28 11:35:29.59: [ 9663]: REMOTE best rate 33600 bit/s
apr 28 11:35:29.59: [ 9663]: REMOTE max A4 page width (215 mm)
apr 28 11:35:29.59: [ 9663]: REMOTE max unlimited page length
apr 28 11:35:29.59: [ 9663]: REMOTE best vres 15.4 line/mm
apr 28 11:35:29.59: [ 9663]: REMOTE format support: MH, MR, MMR
apr 28 11:35:29.59: [ 9663]: REMOTE supports T.30 Annex A, 256-byte ECM
apr 28 11:35:29.59: [ 9663]: REMOTE best 10 ms/scanline
apr 28 11:35:29.59: [ 9663]: USE 14400 bit/s
apr 28 11:35:29.59: [ 9663]: USE error correction mode
apr 28 11:35:29.59: [ 9663]: SEND file "docq/doc2.ps;f1"
apr 28 11:35:29.59: [ 9663]: USE A4 page width (215 mm)
apr 28 11:35:29.59: [ 9663]: USE unlimited page length
apr 28 11:35:29.59: [ 9663]: USE 7.7 line/mm
apr 28 11:35:29.59: [ 9663]: USE 2-D MMR
apr 28 11:35:29.59: [ 9663]: USE 0 ms/scanline
apr 28 11:35:29.59: [ 9663]: SEND training at v.17 14400 bit/s
apr 28 11:35:29.59: [ 9663]: <-- [9:AT+FRS=7\r]
apr 28 11:35:29.88: [ 9663]: --> [2:OK]
apr 28 11:35:29.88: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:35:30.10: [ 9663]: --> [7:CONNECT]
apr 28 11:35:30.10: [ 9663]: <-- data [23]
apr 28 11:35:30.10: [ 9663]: <-- data [2]
apr 28 11:35:31.74: [ 9663]: --> [7:CONNECT]
apr 28 11:35:31.74: [ 9663]: <-- data [7]
apr 28 11:35:31.74: [ 9663]: <-- data [2]
apr 28 11:35:32.21: [ 9663]: --> [2:OK]
apr 28 11:35:32.21: [ 9663]: <-- [9:AT+FTS=7\r]
apr 28 11:35:32.29: [ 9663]: --> [2:OK]
apr 28 11:35:32.29: [ 9663]: <-- [11:AT+FTM=145\r]
apr 28 11:35:32.31: [ 9663]: --> [7:CONNECT]
apr 28 11:35:32.31: [ 9663]: <-- data [1024]
apr 28 11:35:32.31: [ 9663]: <-- data [1024]
apr 28 11:35:32.31: [ 9663]: <-- data [652]
apr 28 11:35:32.31: [ 9663]: <-- data [2]
apr 28 11:35:34.44: [ 9663]: --> [2:OK]
apr 28 11:35:34.44: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:35:35.92: [ 9663]: --> [7:CONNECT]
apr 28 11:35:36.80: [ 9663]: --> [2:OK]
apr 28 11:35:36.80: [ 9663]: SEND training at v.17 12000 bit/s
apr 28 11:35:36.80: [ 9663]: <-- [9:AT+FRS=7\r]
apr 28 11:35:36.93: [ 9663]: --> [2:OK]
apr 28 11:35:36.93: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:35:37.14: [ 9663]: --> [7:CONNECT]
apr 28 11:35:37.14: [ 9663]: <-- data [23]
apr 28 11:35:37.14: [ 9663]: <-- data [2]
apr 28 11:35:38.79: [ 9663]: --> [7:CONNECT]
apr 28 11:35:38.79: [ 9663]: <-- data [7]
apr 28 11:35:38.79: [ 9663]: <-- data [2]
apr 28 11:35:39.26: [ 9663]: --> [2:OK]
apr 28 11:35:39.26: [ 9663]: <-- [9:AT+FTS=7\r]
apr 28 11:35:39.34: [ 9663]: --> [2:OK]
apr 28 11:35:39.34: [ 9663]: <-- [11:AT+FTM=121\r]
apr 28 11:35:39.36: [ 9663]: --> [7:CONNECT]
apr 28 11:35:39.36: [ 9663]: <-- data [1024]
apr 28 11:35:39.36: [ 9663]: <-- data [1024]
apr 28 11:35:39.36: [ 9663]: <-- data [202]
apr 28 11:35:39.36: [ 9663]: <-- data [2]
apr 28 11:35:41.27: [ 9663]: --> [2:OK]
apr 28 11:35:41.27: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:35:42.97: [ 9663]: --> [7:CONNECT]
apr 28 11:35:43.86: [ 9663]: --> [2:OK]
apr 28 11:35:43.86: [ 9663]: SEND training at v.29 9600 bit/s
apr 28 11:35:43.86: [ 9663]: <-- [9:AT+FRS=7\r]
apr 28 11:35:44.16: [ 9663]: --> [2:OK]
apr 28 11:35:44.16: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:35:44.38: [ 9663]: --> [7:CONNECT]
apr 28 11:35:44.38: [ 9663]: <-- data [23]
apr 28 11:35:44.38: [ 9663]: <-- data [2]
apr 28 11:35:46.02: [ 9663]: --> [7:CONNECT]
apr 28 11:35:46.02: [ 9663]: <-- data [7]
apr 28 11:35:46.02: [ 9663]: <-- data [2]
apr 28 11:35:46.49: [ 9663]: --> [2:OK]
apr 28 11:35:46.49: [ 9663]: <-- [9:AT+FTS=7\r]
apr 28 11:35:46.57: [ 9663]: --> [2:OK]
apr 28 11:35:46.57: [ 9663]: <-- [10:AT+FTM=96\r]
apr 28 11:35:46.59: [ 9663]: --> [7:CONNECT]
apr 28 11:35:46.59: [ 9663]: <-- data [1024]
apr 28 11:35:46.59: [ 9663]: <-- data [776]
apr 28 11:35:46.59: [ 9663]: <-- data [2]
apr 28 11:35:48.46: [ 9663]: --> [1:]
apr 28 11:35:48.46: [ 9663]: --> [2:OK]
apr 28 11:35:48.46: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:35:49.02: [ 9663]: --> [7:CONNECT]
apr 28 11:35:49.91: [ 9663]: --> [2:OK]
apr 28 11:35:49.91: [ 9663]: TRAINING succeeded
apr 28 11:35:49.91: [ 9663]: SEND begin page
apr 28 11:35:49.94: [ 9663]: SEND send frame number 0
[BIG CUT}
apr 28 11:36:11.14: [ 9663]: <-- data [7]
apr 28 11:36:11.14: [ 9663]: <-- data [2]
apr 28 11:36:12.50: [ 9663]: --> [2:OK]
apr 28 11:36:12.50: [ 9663]: SEND send PPS (partial page signal)
apr 28 11:36:12.50: [ 9663]: SEND send MPS (more pages, same document)
apr 28 11:36:12.50: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:36:13.16: [ 9663]: --> [7:CONNECT]
apr 28 11:36:13.18: [ 9663]: --> [5:ERROR]
apr 28 11:36:13.18: [ 9663]: MODEM Command error
apr 28 11:36:13.18: [ 9663]: FCS error
apr 28 11:36:13.18: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:36:13.39: [ 9663]: --> [7:CONNECT]
apr 28 11:36:13.39: [ 9663]: <-- data [7]
apr 28 11:36:13.39: [ 9663]: <-- data [2]
apr 28 11:36:14.76: [ 9663]: --> [2:OK]
apr 28 11:36:14.76: [ 9663]: SEND send PPS (partial page signal)
apr 28 11:36:14.76: [ 9663]: SEND send MPS (more pages, same document)
apr 28 11:36:14.76: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:36:17.86: [ 9663]: --> [0:]
apr 28 11:36:17.86: [ 9663]: MODEM <Empty line>
apr 28 11:36:17.86: [ 9663]: <-- data [1]
apr 28 11:36:17.86: [ 9663]: --> [2:OK]
apr 28 11:36:17.86: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:36:18.08: [ 9663]: --> [7:CONNECT]
apr 28 11:36:18.08: [ 9663]: <-- data [7]
apr 28 11:36:18.08: [ 9663]: <-- data [2]
apr 28 11:36:19.44: [ 9663]: --> [2:OK]
apr 28 11:36:19.44: [ 9663]: SEND send PPS (partial page signal)
apr 28 11:36:19.44: [ 9663]: SEND send MPS (more pages, same document)
apr 28 11:36:19.44: [ 9663]: <-- [9:AT+FRH=3\r]
apr 28 11:36:21.62: [ 9663]: --> [7:CONNECT]
apr 28 11:36:22.50: [ 9663]: --> [2:OK]
apr 28 11:36:22.50: [ 9663]: SEND recv DCN (disconnect)
apr 28 11:36:22.50: [ 9663]: <-- [9:AT+FRS=7\r]
apr 28 11:36:22.60: [ 9663]: --> [2:OK]
apr 28 11:36:22.60: [ 9663]: COMREC invalid response received to PPS.
apr 28 11:36:22.60: [ 9663]: SEND end page
apr 28 11:36:22.60: [ 9663]: <-- [9:AT+FTH=3\r]
apr 28 11:36:22.82: [ 9663]: --> [7:CONNECT]
apr 28 11:36:22.82: [ 9663]: <-- data [3]
apr 28 11:36:22.82: [ 9663]: <-- data [2]
apr 28 11:36:24.06: [ 9663]: --> [2:OK]
apr 28 11:36:24.06: [ 9663]: SEND FAILED: JOB 2 DEST 066505125 ERR [334] COMREC invalid response received to PPS.; too many attempts to send
apr 28 11:36:25.06: [ 9663]: <-- [5:ATH0\r]
apr 28 11:36:25.18: [ 9663]: --> [2:OK]
apr 28 11:36:25.18: [ 9663]: SESSION END

THIRD:

apr 28 11:30:24.24: [ 9613]: SESSION BEGIN 000000436 3966505125
apr 28 11:30:24.24: [ 9613]: HylaFAX (tm) Version 6.0.3
apr 28 11:30:24.24: [ 9613]: SEND FAX: JOB 2 DEST 066505125 COMMID 000000436 DEVICE '/dev/ttyS1' FROM 'benfox <bernardo.volpi@xxxxxxxxxxxxxxxxx>' USER publica
apr 28 11:30:24.24: [ 9613]: <-- [12:AT+FCLASS=1\r]
apr 28 11:30:24.38: [ 9613]: --> [2:OK]
apr 28 11:30:24.38: [ 9613]: DIAL 066505125
apr 28 11:30:24.38: [ 9613]: <-- [14:ATDT066505125\r]
apr 28 11:30:46.66: [ 9613]: --> [7:CONNECT]
apr 28 11:30:47.68: [ 9613]: --> [2:OK]
apr 28 11:30:47.68: [ 9613]: REMOTE best rate 33600 bit/s
apr 28 11:30:47.68: [ 9613]: REMOTE max A4 page width (215 mm)
apr 28 11:30:47.68: [ 9613]: REMOTE max unlimited page length
apr 28 11:30:47.68: [ 9613]: REMOTE best vres 15.4 line/mm
apr 28 11:30:47.68: [ 9613]: REMOTE format support: MH, MR, MMR
apr 28 11:30:47.68: [ 9613]: REMOTE supports T.30 Annex A, 256-byte ECM
apr 28 11:30:47.68: [ 9613]: REMOTE best 10 ms/scanline
apr 28 11:30:47.68: [ 9613]: USE 14400 bit/s
apr 28 11:30:47.68: [ 9613]: USE error correction mode
apr 28 11:30:47.68: [ 9613]: SEND file "docq/doc2.ps;f1"
apr 28 11:30:47.68: [ 9613]: USE A4 page width (215 mm)
apr 28 11:30:47.68: [ 9613]: USE unlimited page length
apr 28 11:30:47.68: [ 9613]: USE 7.7 line/mm
apr 28 11:30:47.68: [ 9613]: USE 2-D MMR
apr 28 11:30:47.68: [ 9613]: USE 0 ms/scanline
apr 28 11:30:47.68: [ 9613]: SEND training at v.17 14400 bit/s
apr 28 11:30:47.68: [ 9613]: <-- [9:AT+FRS=7\r]
apr 28 11:30:47.99: [ 9613]: --> [2:OK]
apr 28 11:30:47.99: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:30:48.20: [ 9613]: --> [7:CONNECT]
apr 28 11:30:48.20: [ 9613]: <-- data [23]
apr 28 11:30:48.20: [ 9613]: <-- data [2]
apr 28 11:30:49.85: [ 9613]: --> [7:CONNECT]
apr 28 11:30:49.85: [ 9613]: <-- data [7]
apr 28 11:30:49.85: [ 9613]: <-- data [2]
apr 28 11:30:50.32: [ 9613]: --> [2:OK]
apr 28 11:30:50.32: [ 9613]: <-- [9:AT+FTS=7\r]
apr 28 11:30:50.40: [ 9613]: --> [2:OK]
apr 28 11:30:50.40: [ 9613]: <-- [11:AT+FTM=145\r]
apr 28 11:30:50.42: [ 9613]: --> [7:CONNECT]
apr 28 11:30:50.42: [ 9613]: <-- data [1024]
apr 28 11:30:50.42: [ 9613]: <-- data [1024]
apr 28 11:30:50.42: [ 9613]: <-- data [652]
apr 28 11:30:50.42: [ 9613]: <-- data [2]
apr 28 11:30:52.56: [ 9613]: --> [2:OK]
apr 28 11:30:52.56: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:30:54.03: [ 9613]: --> [7:CONNECT]
apr 28 11:30:54.92: [ 9613]: --> [2:OK]
apr 28 11:30:54.92: [ 9613]: SEND training at v.17 12000 bit/s
apr 28 11:30:54.92: [ 9613]: <-- [9:AT+FRS=7\r]
apr 28 11:30:55.23: [ 9613]: --> [2:OK]
apr 28 11:30:55.23: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:30:55.44: [ 9613]: --> [7:CONNECT]
apr 28 11:30:55.44: [ 9613]: <-- data [23]
apr 28 11:30:55.44: [ 9613]: <-- data [2]
apr 28 11:30:57.08: [ 9613]: --> [7:CONNECT]
apr 28 11:30:57.08: [ 9613]: <-- data [7]
apr 28 11:30:57.08: [ 9613]: <-- data [2]
apr 28 11:30:57.56: [ 9613]: --> [2:OK]
apr 28 11:30:57.56: [ 9613]: <-- [9:AT+FTS=7\r]
apr 28 11:30:57.65: [ 9613]: --> [2:OK]
apr 28 11:30:57.65: [ 9613]: <-- [11:AT+FTM=121\r]
apr 28 11:30:57.66: [ 9613]: --> [7:CONNECT]
apr 28 11:30:57.66: [ 9613]: <-- data [1024]
apr 28 11:30:57.66: [ 9613]: <-- data [1024]
apr 28 11:30:57.66: [ 9613]: <-- data [202]
apr 28 11:30:57.66: [ 9613]: <-- data [2]
apr 28 11:30:59.57: [ 9613]: --> [2:OK]
apr 28 11:30:59.57: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:31:01.28: [ 9613]: --> [7:CONNECT]
apr 28 11:31:02.18: [ 9613]: --> [2:OK]
apr 28 11:31:02.18: [ 9613]: SEND training at v.29 9600 bit/s
apr 28 11:31:02.18: [ 9613]: <-- [9:AT+FRS=7\r]
apr 28 11:31:02.56: [ 9613]: --> [2:OK]
apr 28 11:31:02.56: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:31:02.77: [ 9613]: --> [7:CONNECT]
apr 28 11:31:02.77: [ 9613]: <-- data [23]
apr 28 11:31:02.77: [ 9613]: <-- data [2]
apr 28 11:31:04.42: [ 9613]: --> [7:CONNECT]
apr 28 11:31:04.42: [ 9613]: <-- data [7]
apr 28 11:31:04.42: [ 9613]: <-- data [2]
apr 28 11:31:04.89: [ 9613]: --> [2:OK]
apr 28 11:31:04.89: [ 9613]: <-- [9:AT+FTS=7\r]
apr 28 11:31:04.97: [ 9613]: --> [2:OK]
apr 28 11:31:04.97: [ 9613]: <-- [10:AT+FTM=96\r]
apr 28 11:31:04.99: [ 9613]: --> [7:CONNECT]
apr 28 11:31:04.99: [ 9613]: <-- data [1024]
apr 28 11:31:04.99: [ 9613]: <-- data [776]
apr 28 11:31:04.99: [ 9613]: <-- data [2]
apr 28 11:31:06.87: [ 9613]: --> [1:]
apr 28 11:31:06.87: [ 9613]: --> [2:OK]
apr 28 11:31:06.87: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:31:07.50: [ 9613]: --> [7:CONNECT]
apr 28 11:31:08.39: [ 9613]: --> [2:OK]
apr 28 11:31:08.39: [ 9613]: TRAINING succeeded
apr 28 11:31:08.39: [ 9613]: SEND begin page
apr 28 11:31:08.42: [ 9613]: SEND send frame number 0
apr 28 11:31:08.42: [ 9613]: SEND send frame number 1
[BIG CUT]
apr 28 11:31:26.73: [ 9613]: <-- data [1032]
apr 28 11:31:26.73: [ 9613]: <-- data [528]
apr 28 11:31:28.72: [ 9613]: <-- data [2]
apr 28 11:31:29.31: [ 9613]: --> [1:]
apr 28 11:31:29.31: [ 9613]: --> [2:OK]
apr 28 11:31:29.31: [ 9613]: <-- [9:AT+FTS=7\r]
apr 28 11:31:29.39: [ 9613]: --> [2:OK]
apr 28 11:31:29.39: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:31:29.60: [ 9613]: --> [7:CONNECT]
apr 28 11:31:29.60: [ 9613]: <-- data [7]
apr 28 11:31:29.60: [ 9613]: <-- data [2]
apr 28 11:31:30.97: [ 9613]: --> [2:OK]
apr 28 11:31:30.97: [ 9613]: SEND send PPS (partial page signal)
apr 28 11:31:30.97: [ 9613]: SEND send MPS (more pages, same document)
apr 28 11:31:30.97: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:31:31.63: [ 9613]: --> [7:CONNECT]
apr 28 11:31:31.64: [ 9613]: --> [5:ERROR]
apr 28 11:31:31.64: [ 9613]: MODEM Command error
apr 28 11:31:31.64: [ 9613]: FCS error
apr 28 11:31:31.64: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:31:31.86: [ 9613]: --> [7:CONNECT]
apr 28 11:31:31.86: [ 9613]: <-- data [7]
apr 28 11:31:31.86: [ 9613]: <-- data [2]
apr 28 11:31:33.22: [ 9613]: --> [2:OK]
apr 28 11:31:33.22: [ 9613]: SEND send PPS (partial page signal)
apr 28 11:31:33.22: [ 9613]: SEND send MPS (more pages, same document)
apr 28 11:31:33.22: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:31:36.33: [ 9613]: --> [0:]
apr 28 11:31:36.33: [ 9613]: MODEM <Empty line>
apr 28 11:31:36.33: [ 9613]: <-- data [1]
apr 28 11:31:36.34: [ 9613]: --> [2:OK]
apr 28 11:31:36.34: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:31:36.54: [ 9613]: --> [7:CONNECT]
apr 28 11:31:36.54: [ 9613]: <-- data [7]
apr 28 11:31:36.54: [ 9613]: <-- data [2]
apr 28 11:31:37.91: [ 9613]: --> [2:OK]
apr 28 11:31:37.91: [ 9613]: SEND send PPS (partial page signal)
apr 28 11:31:37.91: [ 9613]: SEND send MPS (more pages, same document)
apr 28 11:31:37.91: [ 9613]: <-- [9:AT+FRH=3\r]
apr 28 11:31:38.56: [ 9613]: --> [7:CONNECT]
apr 28 11:31:38.57: [ 9613]: --> [5:ERROR]
apr 28 11:31:38.57: [ 9613]: MODEM Command error
apr 28 11:31:38.57: [ 9613]: FCS error
apr 28 11:31:38.57: [ 9613]: No response to PPS repeated 3 times.
apr 28 11:31:38.57: [ 9613]: SEND end page
apr 28 11:31:38.57: [ 9613]: <-- [9:AT+FRS=7\r]
apr 28 11:31:40.69: [ 9613]: --> [2:OK]
apr 28 11:31:40.69: [ 9613]: <-- [9:AT+FTH=3\r]
apr 28 11:31:40.90: [ 9613]: --> [7:CONNECT]
apr 28 11:31:40.90: [ 9613]: <-- data [3]
apr 28 11:31:40.90: [ 9613]: <-- data [2]
apr 28 11:31:42.14: [ 9613]: --> [2:OK]
apr 28 11:31:43.15: [ 9613]: <-- [5:ATH0\r]
apr 28 11:31:43.26: [ 9613]: --> [2:OK]
apr 28 11:31:43.26: [ 9613]: SESSION END