[hylafax-users] remote modem hangs after PPS... or it seems so!

[Bernardo Volpi <bernardo.volpi@xxxxxxxxxxxxxxxxx>]

Hi everybody

I've been lurking this forum quite a long time so far, and found that many people had my problem, but there wasn't a common solution.

I keep getting "No response to PPS repeated 3 times" with almost ALL the number I call, except for a few ones.

I have Hylafax 6.0.3 on Ubuntu destkop 9.10
Modem is USR Robotics serial number 71-245630-01, Class 1, on ttyS1
The serial number tells it is a 5630 modem, but faxaddmodem recognize it as 5601.
I googled a while, and think that both are right: 5630 is the model, but 5601 is what's inside...
(did I get it well? :-) )

I tried also configuring modem with 2.0 (faxaddmodem tells me that it supports only 1 and 2.0) but I had no luck.


See attached files:

faxstat_v.txt:    output from faxstat -v
c000000416:    log for GOOD session (job number q690)
q690:                job found in doneq/ directory
c000000432:    log for ONE OF THE 690 BAD TRIES (job number q695)
q695:                job found in doneq/ directory
config.ttS1:        config file for modem
hfaxd.conf:        file from /etc/hylafax directory
hyla.conf:        file from /etc/hylafax directory


I do hope somebody will help me,
and I do thank you in advance for aaaaaaany help!

Cheers

Bernardo

apr 20 16:38:40.51: [30112]: SESSION BEGIN 000000416 39055055255755
apr 20 16:38:40.51: [30112]: HylaFAX (tm) Version 6.0.3
apr 20 16:38:40.51: [30112]: SEND FAX: JOB 690 DEST 055255755 COMMID 000000416 DEVICE '/dev/ttyS1' FROM 'benfox <bernardo.volpi@xxxxxxxxxxxxxxxxx>' USER publica
apr 20 16:38:40.51: [30112]: <-- [9:AT+FLO=2\r]
apr 20 16:38:40.65: [30112]: --> [2:OK]
apr 20 16:38:40.65: [30112]: <-- [9:AT+FPP=0\r]
apr 20 16:38:40.79: [30112]: --> [2:OK]
apr 20 16:38:40.79: [30112]: <-- [9:AT+FBO=0\r]
apr 20 16:38:40.92: [30112]: --> [2:OK]
apr 20 16:38:40.92: [30112]: <-- [10:AT+FCT=30\r]
apr 20 16:38:41.06: [30112]: --> [2:OK]
apr 20 16:38:41.06: [30112]: <-- [15:AT+FNR=1,1,1,0\r]
apr 20 16:38:41.21: [30112]: --> [2:OK]
apr 20 16:38:41.21: [30112]: <-- [9:AT+FIE=0\r]
apr 20 16:38:41.34: [30112]: --> [2:OK]
apr 20 16:38:41.34: [30112]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
apr 20 16:38:41.49: [30112]: --> [2:OK]
apr 20 16:38:41.49: [30112]: DIAL 055255755
apr 20 16:38:41.49: [30112]: <-- [14:ATDT055255755\r]
apr 20 16:39:22.50: [30112]: --> [4:+FCO]
apr 20 16:39:25.84: [30112]: --> [27:+FCI:"           055255755"]
apr 20 16:39:25.84: [30112]: REMOTE CSI "055255755"
apr 20 16:39:25.85: [30112]: --> [20:+FIS:1,5,0,2,1,0,0,5]
apr 20 16:39:25.86: [30112]: --> [2:OK]
apr 20 16:39:25.86: [30112]: REMOTE best rate 14400 bit/s
apr 20 16:39:25.86: [30112]: REMOTE max A4 page width (215 mm)
apr 20 16:39:25.86: [30112]: REMOTE max unlimited page length
apr 20 16:39:25.86: [30112]: REMOTE best vres 7.7 line/mm
apr 20 16:39:25.86: [30112]: REMOTE format support: MH, MR
apr 20 16:39:25.86: [30112]: REMOTE best 20 ms/scanline
apr 20 16:39:25.86: [30112]: USE 14400 bit/s
apr 20 16:39:25.86: [30112]: SEND file "docq/doc297.ps;31"
apr 20 16:39:25.86: [30112]: USE A4 page width (215 mm)
apr 20 16:39:25.86: [30112]: USE unlimited page length
apr 20 16:39:25.86: [30112]: USE 7.7 line/mm
apr 20 16:39:25.86: [30112]: USE 1-D MH
apr 20 16:39:25.86: [30112]: USE 20 ms/scanline
apr 20 16:39:25.86: [30112]: <-- [23:AT+FIS=1,5,0,2,0,0,0,5\r]
apr 20 16:39:26.01: [30112]: --> [2:OK]
apr 20 16:39:26.01: [30112]: <-- [7:AT+FDT\r]
apr 20 16:39:26.19: [30112]: --> [20:+FCS:1,5,0,2,0,0,0,5]
apr 20 16:39:33.85: [30112]: --> [20:+FCS:1,5,0,2,0,0,0,5]
apr 20 16:39:41.50: [30112]: --> [20:+FCS:1,5,0,2,0,0,0,5]
apr 20 16:39:48.75: [30112]: --> [7:CONNECT]
apr 20 16:39:48.75: [30112]: SEND begin page
apr 20 16:39:48.75: [30112]: <-- data [1028]
apr 20 16:39:48.75: [30112]: <-- data [1027]
apr 20 16:39:48.75: [30112]: <-- data [1028]
apr 20 16:39:48.75: [30112]: <-- data [1025]
apr 20 16:39:48.75: [30112]: <-- data [1025]
apr 20 16:39:50.74: [30112]: <-- data [1026]
apr 20 16:39:50.74: [30112]: <-- data [1027]
apr 20 16:39:50.74: [30112]: <-- data [1037]
apr 20 16:39:52.74: [30112]: <-- data [1025]
apr 20 16:39:52.74: [30112]: <-- data [1032]
apr 20 16:39:52.74: [30112]: <-- data [1035]
apr 20 16:39:52.74: [30112]: <-- data [1045]
apr 20 16:39:54.73: [30112]: <-- data [1038]
apr 20 16:39:54.73: [30112]: <-- data [1035]
apr 20 16:39:54.73: [30112]: <-- data [1039]
apr 20 16:39:54.73: [30112]: <-- data [1027]
apr 20 16:39:58.64: [30112]: <-- data [1034]
apr 20 16:39:58.64: [30112]: <-- data [1032]
apr 20 16:39:58.64: [30112]: <-- data [1032]
apr 20 16:39:58.64: [30112]: <-- data [1044]
apr 20 16:40:00.80: [30112]: <-- data [1040]
apr 20 16:40:00.80: [30112]: <-- data [1037]
apr 20 16:40:00.80: [30112]: <-- data [1042]
apr 20 16:40:03.58: [30112]: <-- data [1045]
apr 20 16:40:03.58: [30112]: <-- data [1029]
apr 20 16:40:03.58: [30112]: <-- data [1028]
apr 20 16:40:03.58: [30112]: <-- data [1026]
apr 20 16:40:05.69: [30112]: <-- data [1024]
apr 20 16:40:07.68: [30112]: <-- data [1030]
apr 20 16:40:07.68: [30112]: <-- data [1027]
apr 20 16:40:07.68: [30112]: <-- data [1032]
apr 20 16:40:07.68: [30112]: <-- data [1025]
apr 20 16:40:11.44: [30112]: <-- data [1025]
apr 20 16:40:11.44: [30112]: <-- data [1025]
apr 20 16:40:11.44: [30112]: <-- data [1027]
apr 20 16:40:11.44: [30112]: <-- data [1029]
apr 20 16:40:14.39: [30112]: <-- data [1029]
apr 20 16:40:14.39: [30112]: <-- data [1031]
apr 20 16:40:14.39: [30112]: <-- data [1029]
apr 20 16:40:14.39: [30112]: <-- data [1026]
apr 20 16:40:15.68: [30112]: <-- data [1027]
apr 20 16:40:16.78: [30112]: <-- data [1026]
apr 20 16:40:18.77: [30112]: <-- data [1024]
apr 20 16:40:18.77: [30112]: <-- data [1028]
apr 20 16:40:18.77: [30112]: <-- data [1026]
apr 20 16:40:19.66: [30112]: <-- data [1024]
apr 20 16:40:21.65: [30112]: <-- data [1029]
apr 20 16:40:21.65: [30112]: <-- data [1026]
apr 20 16:40:21.65: [30112]: <-- data [1031]
apr 20 16:40:22.40: [30112]: <-- data [1029]
apr 20 16:40:24.39: [30112]: <-- data [1025]
apr 20 16:40:24.39: [30112]: <-- data [1029]
apr 20 16:40:24.39: [30112]: <-- data [1030]
apr 20 16:40:25.21: [30112]: <-- data [1034]
apr 20 16:40:28.17: [30112]: <-- data [1028]
apr 20 16:40:28.17: [30112]: <-- data [1033]
apr 20 16:40:28.17: [30112]: <-- data [1027]
apr 20 16:40:29.76: [30112]: <-- data [1028]
apr 20 16:40:32.07: [30112]: <-- data [1029]
apr 20 16:40:32.07: [30112]: <-- data [1031]
apr 20 16:40:32.07: [30112]: <-- data [1027]
apr 20 16:40:34.18: [30112]: <-- data [1024]
apr 20 16:40:34.18: [30112]: <-- data [1028]
apr 20 16:40:34.18: [30112]: <-- data [1027]
apr 20 16:40:36.17: [30112]: <-- data [1030]
apr 20 16:40:36.17: [30112]: <-- data [1027]
apr 20 16:40:36.17: [30112]: <-- data [1025]
apr 20 16:40:37.10: [30112]: <-- data [556]
apr 20 16:40:39.09: [30112]: SENT 69164 bytes of data
apr 20 16:40:39.09: [30112]: SEND 1D RTC
apr 20 16:40:39.09: [30112]: <-- data [9]
apr 20 16:40:39.09: [30112]: SEND end page
apr 20 16:40:39.09: [30112]: SEND send MPS (more pages, same document)
apr 20 16:40:39.09: [30112]: <-- data [2]
apr 20 16:40:51.87: [30112]: --> [2:OK]
apr 20 16:40:51.87: [30112]: <-- [8:AT+FPS?\r]
apr 20 16:40:52.01: [30112]: --> [1:1]
apr 20 16:40:52.14: [30112]: --> [2:OK]
apr 20 16:40:52.14: [30112]: SEND recv MCF (message confirmation)
apr 20 16:40:52.14: [30112]: SEND FAX (000000416): FROM bernardo.volpi@xxxxxxxxxxxxxxxxx TO 055255755 (page 1 of 2 sent in 0:01:27)
apr 20 16:40:52.14: [30112]: <-- [7:AT+FDT\r]
apr 20 16:40:52.39: [30112]: --> [7:CONNECT]
apr 20 16:40:52.39: [30112]: SEND begin page
apr 20 16:40:52.39: [30112]: <-- data [1028]
apr 20 16:40:52.39: [30112]: <-- data [1028]
apr 20 16:40:52.39: [30112]: <-- data [1028]
apr 20 16:40:52.39: [30112]: <-- data [1031]
apr 20 16:40:54.39: [30112]: <-- data [1035]
apr 20 16:40:54.39: [30112]: <-- data [1030]
apr 20 16:40:54.39: [30112]: <-- data [1029]
apr 20 16:40:54.39: [30112]: <-- data [1030]
apr 20 16:40:56.52: [30112]: <-- data [1026]
apr 20 16:40:56.52: [30112]: <-- data [1025]
apr 20 16:40:59.06: [30112]: <-- data [1024]
apr 20 16:40:59.06: [30112]: <-- data [1026]
apr 20 16:40:59.06: [30112]: <-- data [1026]
apr 20 16:40:59.06: [30112]: <-- data [1026]
apr 20 16:41:02.17: [30112]: <-- data [1025]
apr 20 16:41:03.67: [30112]: <-- data [1026]
apr 20 16:41:05.76: [30112]: <-- data [1025]
apr 20 16:41:05.76: [30112]: <-- data [1024]
apr 20 16:41:05.76: [30112]: <-- data [1025]
apr 20 16:41:07.80: [30112]: <-- data [1025]
apr 20 16:41:07.80: [30112]: <-- data [1025]
apr 20 16:41:07.80: [30112]: <-- data [1026]
apr 20 16:41:09.22: [30112]: <-- data [1026]
apr 20 16:41:11.88: [30112]: <-- data [1026]
apr 20 16:41:11.88: [30112]: <-- data [1026]
apr 20 16:41:11.88: [30112]: <-- data [1025]
apr 20 16:41:11.88: [30112]: <-- data [1026]
apr 20 16:41:13.87: [30112]: <-- data [1028]
apr 20 16:41:13.87: [30112]: <-- data [1028]
apr 20 16:41:13.87: [30112]: <-- data [1024]
apr 20 16:41:13.87: [30112]: <-- data [1025]
apr 20 16:41:16.74: [30112]: <-- data [1024]
apr 20 16:41:16.74: [30112]: <-- data [1030]
apr 20 16:41:18.73: [30112]: <-- data [1026]
apr 20 16:41:18.73: [30112]: <-- data [1026]
apr 20 16:41:18.73: [30112]: <-- data [1024]
apr 20 16:41:18.73: [30112]: <-- data [1024]
apr 20 16:41:20.16: [30112]: <-- data [1025]
apr 20 16:41:20.16: [30112]: <-- data [1024]
apr 20 16:41:21.91: [30112]: <-- data [1025]
apr 20 16:41:21.91: [30112]: <-- data [1027]
apr 20 16:41:23.90: [30112]: <-- data [1026]
apr 20 16:41:23.90: [30112]: <-- data [1025]
apr 20 16:41:23.90: [30112]: <-- data [1027]
apr 20 16:41:23.90: [30112]: <-- data [1024]
apr 20 16:41:25.51: [30112]: <-- data [1026]
apr 20 16:41:27.25: [30112]: <-- data [1030]
apr 20 16:41:27.25: [30112]: <-- data [1027]
apr 20 16:41:27.25: [30112]: <-- data [1027]
apr 20 16:41:28.82: [30112]: <-- data [1031]
apr 20 16:41:31.10: [30112]: <-- data [1025]
apr 20 16:41:31.10: [30112]: <-- data [1024]
apr 20 16:41:32.78: [30112]: <-- data [1028]
apr 20 16:41:32.78: [30112]: <-- data [1033]
apr 20 16:41:34.56: [30112]: <-- data [1026]
apr 20 16:41:34.56: [30112]: <-- data [1025]
apr 20 16:41:34.56: [30112]: <-- data [394]
apr 20 16:41:34.56: [30112]: SENT 57738 bytes of data
apr 20 16:41:34.56: [30112]: SEND 1D RTC
apr 20 16:41:34.56: [30112]: <-- data [9]
apr 20 16:41:34.56: [30112]: SEND end page
apr 20 16:41:34.56: [30112]: SEND send EOP (no more pages or documents)
apr 20 16:41:34.56: [30112]: <-- data [2]
apr 20 16:41:51.69: [30112]: --> [7:+FHS:00]
apr 20 16:41:51.69: [30112]: REMOTE HANGUP: Normal and proper end of connection (code 0)
apr 20 16:41:51.82: [30112]: --> [2:OK]
apr 20 16:41:51.82: [30112]: SEND recv MCF (message confirmation)
apr 20 16:41:51.82: [30112]: SEND FAX (000000416): FROM bernardo.volpi@xxxxxxxxxxxxxxxxx TO 055255755 (page 2 of 2 sent in 0:00:59)
apr 20 16:41:51.82: [30112]: SEND FAX (000000416): FROM bernardo.volpi@xxxxxxxxxxxxxxxxx TO 055255755 (docq/doc297.ps;31 sent in 0:02:26)
apr 20 16:41:52.82: [30112]: <-- [5:ATH0\r]
apr 20 16:41:52.96: [30112]: --> [2:OK]
apr 20 16:41:52.96: [30112]: SESSION END

apr 20 17:54:19.54: [32643]: SESSION BEGIN 000000432 39690160015
apr 20 17:54:19.54: [32643]: HylaFAX (tm) Version 6.0.3
apr 20 17:54:19.54: [32643]: SEND FAX: JOB 695 DEST 0690160015 COMMID 000000432 DEVICE '/dev/ttyS1' FROM 'benfox <bernardo.volpi@xxxxxxxxxxxxxxxxx>' USER publica
apr 20 17:54:19.54: [32643]: <-- [12:AT+FCLASS=1\r]
apr 20 17:54:19.69: [32643]: --> [2:OK]
apr 20 17:54:19.69: [32643]: DIAL 0690160015
apr 20 17:54:19.69: [32643]: <-- [15:ATDT0690160015\r]
apr 20 17:55:03.18: [32643]: --> [7:CONNECT]
apr 20 17:55:04.40: [32643]: --> [2:OK]
apr 20 17:55:04.40: [32643]: REMOTE NSF "86 00 82 00 00 E6 01 C8 40 F0 03 18 80 00 00"
apr 20 17:55:04.40: [32643]: NSF remote fax equipment: unknown - Korea 82 
apr 20 17:55:04.40: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:55:04.43: [32643]: --> [7:CONNECT]
apr 20 17:55:05.15: [32643]: --> [2:OK]
apr 20 17:55:05.15: [32643]: REMOTE CSI "0690380705"
apr 20 17:55:05.15: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:55:05.18: [32643]: --> [7:CONNECT]
apr 20 17:55:05.52: [32643]: --> [2:OK]
apr 20 17:55:05.52: [32643]: REMOTE best rate 33600 bit/s
apr 20 17:55:05.52: [32643]: REMOTE max A4 page width (215 mm)
apr 20 17:55:05.52: [32643]: REMOTE max unlimited page length
apr 20 17:55:05.52: [32643]: REMOTE best vres 300 x 300 dpi
apr 20 17:55:05.52: [32643]: REMOTE format support: MH, MR, MMR
apr 20 17:55:05.52: [32643]: REMOTE supports T.30 Annex A, 256-byte ECM
apr 20 17:55:05.53: [32643]: REMOTE best 10 ms/scanline
apr 20 17:55:05.53: [32643]: USE 14400 bit/s
apr 20 17:55:05.53: [32643]: USE error correction mode
apr 20 17:55:05.53: [32643]: SEND file "docq/doc298.ps;f1"
apr 20 17:55:05.53: [32643]: USE A4 page width (215 mm)
apr 20 17:55:05.53: [32643]: USE unlimited page length
apr 20 17:55:05.53: [32643]: USE 7.7 line/mm
apr 20 17:55:05.53: [32643]: USE 2-D MMR
apr 20 17:55:05.53: [32643]: USE 0 ms/scanline
apr 20 17:55:05.53: [32643]: SEND training at v.17 14400 bit/s
apr 20 17:55:05.53: [32643]: DELAY 70 ms
apr 20 17:55:05.60: [32643]: <-- [9:AT+FTH=3\r]
apr 20 17:55:05.80: [32643]: --> [7:CONNECT]
apr 20 17:55:05.80: [32643]: <-- data [23]
apr 20 17:55:05.80: [32643]: <-- data [2]
apr 20 17:55:05.85: [32643]: --> [7:CONNECT]
apr 20 17:55:05.85: [32643]: <-- data [7]
apr 20 17:55:05.85: [32643]: <-- data [2]
apr 20 17:55:07.80: [32643]: --> [2:OK]
apr 20 17:55:07.80: [32643]: <-- [9:AT+FTS=7\r]
apr 20 17:55:07.90: [32643]: --> [2:OK]
apr 20 17:55:07.90: [32643]: <-- [11:AT+FTM=145\r]
apr 20 17:55:09.39: [32643]: --> [7:CONNECT]
apr 20 17:55:09.39: [32643]: <-- data [1024]
apr 20 17:55:09.39: [32643]: <-- data [1024]
apr 20 17:55:09.39: [32643]: <-- data [652]
apr 20 17:55:09.39: [32643]: <-- data [2]
apr 20 17:55:12.22: [32643]: --> [2:OK]
apr 20 17:55:12.22: [32643]: <-- [9:AT+FRS=1\r]
apr 20 17:55:12.26: [32643]: --> [2:OK]
apr 20 17:55:12.26: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:55:13.14: [32643]: --> [7:CONNECT]
apr 20 17:55:13.95: [32643]: --> [2:OK]
apr 20 17:55:13.95: [32643]: TRAINING succeeded
apr 20 17:55:13.95: [32643]: SEND begin page
apr 20 17:55:13.98: [32643]: SEND send frame number 0
apr 20 17:55:13.98: [32643]: SEND send frame number 1
apr 20 17:55:13.98: [32643]: SEND send frame number 2
apr 20 17:55:13.98: [32643]: SEND send frame number 3
apr 20 17:55:13.98: [32643]: SEND send frame number 4
apr 20 17:55:13.98: [32643]: SEND send frame number 5
apr 20 17:55:13.98: [32643]: SEND send frame number 6
apr 20 17:55:13.98: [32643]: SEND send frame number 7
apr 20 17:55:13.98: [32643]: SEND send frame number 8
apr 20 17:55:13.98: [32643]: SEND send frame number 9
apr 20 17:55:13.98: [32643]: SEND send frame number 10
apr 20 17:55:13.98: [32643]: SEND send frame number 11
apr 20 17:55:13.98: [32643]: SEND send frame number 12
apr 20 17:55:13.98: [32643]: SEND send frame number 13
apr 20 17:55:13.98: [32643]: SEND send frame number 14
apr 20 17:55:13.98: [32643]: SEND send frame number 15
apr 20 17:55:13.98: [32643]: SEND send frame number 16
apr 20 17:55:13.98: [32643]: SEND send frame number 17
apr 20 17:55:13.98: [32643]: SEND send frame number 18
apr 20 17:55:13.98: [32643]: SEND send frame number 19
apr 20 17:55:13.98: [32643]: SEND send frame number 20
apr 20 17:55:13.98: [32643]: SEND send frame number 21
apr 20 17:55:13.98: [32643]: SEND send frame number 22
apr 20 17:55:13.98: [32643]: SEND send frame number 23
apr 20 17:55:13.98: [32643]: SEND send frame number 24
apr 20 17:55:13.98: [32643]: SEND send frame number 25
apr 20 17:55:13.98: [32643]: SEND send frame number 26
apr 20 17:55:13.98: [32643]: SEND send frame number 27
apr 20 17:55:13.98: [32643]: SEND send frame number 28
apr 20 17:55:13.98: [32643]: SEND send frame number 29
apr 20 17:55:13.98: [32643]: SEND send frame number 30
apr 20 17:55:13.98: [32643]: SEND send frame number 31
apr 20 17:55:13.98: [32643]: SEND send frame number 32
apr 20 17:55:13.98: [32643]: SEND send frame number 33
apr 20 17:55:13.98: [32643]: SEND send frame number 34
apr 20 17:55:13.98: [32643]: SEND send frame number 35
apr 20 17:55:13.98: [32643]: SEND send frame number 36
apr 20 17:55:13.98: [32643]: SEND send frame number 37
apr 20 17:55:13.98: [32643]: SEND send frame number 38
apr 20 17:55:13.98: [32643]: SEND send frame number 39
apr 20 17:55:13.99: [32643]: SEND send frame number 40
apr 20 17:55:13.99: [32643]: SEND send frame number 41
apr 20 17:55:13.99: [32643]: SEND send frame number 42
apr 20 17:55:13.99: [32643]: SEND send frame number 43
apr 20 17:55:13.99: [32643]: SEND send frame number 44
apr 20 17:55:13.99: [32643]: SEND send frame number 45
apr 20 17:55:13.99: [32643]: SEND send frame number 46
apr 20 17:55:13.99: [32643]: SEND send frame number 47
apr 20 17:55:13.99: [32643]: SEND send frame number 48
apr 20 17:55:13.99: [32643]: SEND send frame number 49
apr 20 17:55:13.99: [32643]: SEND send frame number 50
apr 20 17:55:13.99: [32643]: SEND send frame number 51
apr 20 17:55:13.99: [32643]: SEND send frame number 52
apr 20 17:55:13.99: [32643]: SEND send frame number 53
apr 20 17:55:13.99: [32643]: SEND send frame number 54
apr 20 17:55:13.99: [32643]: SEND send frame number 55
apr 20 17:55:13.99: [32643]: SEND send frame number 56
apr 20 17:55:13.99: [32643]: SEND send frame number 57
apr 20 17:55:13.99: [32643]: SEND send frame number 58
apr 20 17:55:13.99: [32643]: SEND send frame number 59
apr 20 17:55:13.99: [32643]: SEND send frame number 60
apr 20 17:55:13.99: [32643]: SEND send frame number 61
apr 20 17:55:13.99: [32643]: SEND send frame number 62
apr 20 17:55:13.99: [32643]: SEND send frame number 63
apr 20 17:55:13.99: [32643]: SEND send frame number 64
apr 20 17:55:13.99: [32643]: SEND send frame number 65
apr 20 17:55:13.99: [32643]: SEND send frame number 66
apr 20 17:55:13.99: [32643]: SEND send frame number 67
apr 20 17:55:13.99: [32643]: SEND send frame number 68
apr 20 17:55:13.99: [32643]: SEND send frame number 69
apr 20 17:55:13.99: [32643]: SEND send frame number 70
apr 20 17:55:13.99: [32643]: SEND send frame number 71
apr 20 17:55:13.99: [32643]: SEND send frame number 72
apr 20 17:55:13.99: [32643]: SEND send frame number 73
apr 20 17:55:13.99: [32643]: SEND send frame number 74
apr 20 17:55:13.99: [32643]: SEND send frame number 75
apr 20 17:55:13.99: [32643]: SEND send frame number 76
apr 20 17:55:13.99: [32643]: SEND send frame number 77
apr 20 17:55:13.99: [32643]: SEND send frame number 78
apr 20 17:55:13.99: [32643]: SEND send frame number 79
apr 20 17:55:13.99: [32643]: SEND send frame number 80
apr 20 17:55:13.99: [32643]: SEND send frame number 81
apr 20 17:55:13.99: [32643]: SEND send frame number 82
apr 20 17:55:13.99: [32643]: SEND send frame number 83
apr 20 17:55:13.99: [32643]: SEND send frame number 84
apr 20 17:55:13.99: [32643]: SEND send frame number 85
apr 20 17:55:13.99: [32643]: SEND send frame number 86
apr 20 17:55:13.99: [32643]: SEND send frame number 87
apr 20 17:55:13.99: [32643]: SEND send frame number 88
apr 20 17:55:13.99: [32643]: SEND send frame number 89
apr 20 17:55:13.99: [32643]: SEND send frame number 90
apr 20 17:55:13.99: [32643]: SEND send frame number 91
apr 20 17:55:13.99: [32643]: SEND send frame number 92
apr 20 17:55:13.99: [32643]: SEND send frame number 93
apr 20 17:55:13.99: [32643]: SEND send frame number 94
apr 20 17:55:13.99: [32643]: SEND send frame number 95
apr 20 17:55:13.99: [32643]: SEND send frame number 96
apr 20 17:55:13.99: [32643]: SEND send frame number 97
apr 20 17:55:13.99: [32643]: SEND send frame number 98
apr 20 17:55:13.99: [32643]: SEND send frame number 99
apr 20 17:55:13.99: [32643]: SEND send frame number 100
apr 20 17:55:13.99: [32643]: SEND send frame number 101
apr 20 17:55:13.99: [32643]: SEND send frame number 102
apr 20 17:55:13.99: [32643]: SEND send frame number 103
apr 20 17:55:13.99: [32643]: SEND send frame number 104
apr 20 17:55:13.99: [32643]: SEND send frame number 105
apr 20 17:55:13.99: [32643]: SEND send frame number 106
apr 20 17:55:13.99: [32643]: SEND send frame number 107
apr 20 17:55:13.99: [32643]: SEND send frame number 108
apr 20 17:55:13.99: [32643]: SEND send frame number 109
apr 20 17:55:13.99: [32643]: SEND send frame number 110
apr 20 17:55:13.99: [32643]: SEND send frame number 111
apr 20 17:55:13.99: [32643]: SEND send frame number 112
apr 20 17:55:13.99: [32643]: SEND send frame number 113
apr 20 17:55:13.99: [32643]: SEND send frame number 114
apr 20 17:55:13.99: [32643]: SEND send frame number 115
apr 20 17:55:13.99: [32643]: SEND send frame number 116
apr 20 17:55:13.99: [32643]: SEND send frame number 117
apr 20 17:55:13.99: [32643]: SEND send frame number 118
apr 20 17:55:13.99: [32643]: SEND send frame number 119
apr 20 17:55:13.99: [32643]: SEND send frame number 120
apr 20 17:55:13.99: [32643]: SEND send frame number 121
apr 20 17:55:13.99: [32643]: SEND send frame number 122
apr 20 17:55:13.99: [32643]: SEND send frame number 123
apr 20 17:55:13.99: [32643]: SEND send frame number 124
apr 20 17:55:13.99: [32643]: SEND send frame number 125
apr 20 17:55:13.99: [32643]: SEND send frame number 126
apr 20 17:55:13.99: [32643]: SEND send frame number 127
apr 20 17:55:13.99: [32643]: SEND send frame number 128
apr 20 17:55:13.99: [32643]: SEND send frame number 129
apr 20 17:55:13.99: [32643]: SEND send frame number 130
apr 20 17:55:13.99: [32643]: SEND send frame number 131
apr 20 17:55:13.99: [32643]: SEND send frame number 132
apr 20 17:55:13.99: [32643]: SEND send frame number 133
apr 20 17:55:13.99: [32643]: SEND send frame number 134
apr 20 17:55:13.99: [32643]: SEND send frame number 135
apr 20 17:55:13.99: [32643]: SEND send frame number 136
apr 20 17:55:13.99: [32643]: SEND send frame number 137
apr 20 17:55:13.99: [32643]: SEND send frame number 138
apr 20 17:55:13.99: [32643]: SEND send frame number 139
apr 20 17:55:13.99: [32643]: DELAY 70 ms
apr 20 17:55:14.06: [32643]: <-- [11:AT+FTM=146\r]
apr 20 17:55:14.34: [32643]: --> [7:CONNECT]
apr 20 17:55:14.34: [32643]: <-- data [1028]
apr 20 17:55:14.34: [32643]: <-- data [1031]
apr 20 17:55:14.34: [32643]: <-- data [1031]
apr 20 17:55:14.34: [32643]: <-- data [1031]
apr 20 17:55:18.32: [32643]: <-- data [1030]
apr 20 17:55:18.32: [32643]: <-- data [1032]
apr 20 17:55:18.32: [32643]: <-- data [1030]
apr 20 17:55:18.32: [32643]: <-- data [1037]
apr 20 17:55:22.31: [32643]: <-- data [1037]
apr 20 17:55:22.31: [32643]: <-- data [1031]
apr 20 17:55:22.31: [32643]: <-- data [1032]
apr 20 17:55:22.31: [32643]: <-- data [1029]
apr 20 17:55:26.30: [32643]: <-- data [1033]
apr 20 17:55:26.30: [32643]: <-- data [1031]
apr 20 17:55:26.30: [32643]: <-- data [1030]
apr 20 17:55:26.30: [32643]: <-- data [1035]
apr 20 17:55:30.29: [32643]: <-- data [1028]
apr 20 17:55:30.29: [32643]: <-- data [1035]
apr 20 17:55:30.29: [32643]: <-- data [1026]
apr 20 17:55:34.27: [32643]: <-- data [1032]
apr 20 17:55:34.27: [32643]: <-- data [1036]
apr 20 17:55:34.27: [32643]: <-- data [1035]
apr 20 17:55:34.27: [32643]: <-- data [1029]
apr 20 17:55:38.26: [32643]: <-- data [1029]
apr 20 17:55:38.26: [32643]: <-- data [1029]
apr 20 17:55:38.26: [32643]: <-- data [1031]
apr 20 17:55:38.26: [32643]: <-- data [1040]
apr 20 17:55:42.25: [32643]: <-- data [1027]
apr 20 17:55:42.25: [32643]: <-- data [1026]
apr 20 17:55:42.25: [32643]: <-- data [1030]
apr 20 17:55:42.25: [32643]: <-- data [1031]
apr 20 17:55:46.24: [32643]: <-- data [1030]
apr 20 17:55:46.24: [32643]: <-- data [1034]
apr 20 17:55:46.24: [32643]: <-- data [1028]
apr 20 17:55:50.23: [32643]: <-- data [1034]
apr 20 17:55:50.23: [32643]: <-- data [1036]
apr 20 17:55:50.23: [32643]: <-- data [1026]
apr 20 17:55:50.23: [32643]: <-- data [646]
apr 20 17:55:54.21: [32643]: <-- data [2]
apr 20 17:55:54.66: [32643]: --> [2:OK]
apr 20 17:55:54.66: [32643]: <-- [9:AT+FTS=7\r]
apr 20 17:55:54.76: [32643]: --> [2:OK]
apr 20 17:55:54.76: [32643]: <-- [9:AT+FTH=3\r]
apr 20 17:55:54.92: [32643]: --> [7:CONNECT]
apr 20 17:55:54.92: [32643]: <-- data [7]
apr 20 17:55:54.92: [32643]: <-- data [2]
apr 20 17:55:56.21: [32643]: --> [2:OK]
apr 20 17:55:56.21: [32643]: SEND send PPS (partial page signal)
apr 20 17:55:56.21: [32643]: SEND send MPS (more pages, same document)
apr 20 17:55:56.21: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:55:56.79: [32643]: --> [10:NO CARRIER]
apr 20 17:55:56.79: [32643]: MODEM No carrier
apr 20 17:55:56.79: [32643]: <-- [9:AT+FTH=3\r]
apr 20 17:55:57.00: [32643]: --> [7:CONNECT]
apr 20 17:55:57.00: [32643]: <-- data [7]
apr 20 17:55:57.00: [32643]: <-- data [2]
apr 20 17:55:58.28: [32643]: --> [2:OK]
apr 20 17:55:58.28: [32643]: SEND send PPS (partial page signal)
apr 20 17:55:58.28: [32643]: SEND send MPS (more pages, same document)
apr 20 17:55:58.28: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:55:59.02: [32643]: --> [7:CONNECT]
apr 20 17:55:59.04: [32643]: --> [5:ERROR]
apr 20 17:55:59.04: [32643]: MODEM Command error
apr 20 17:55:59.04: [32643]: FCS error
apr 20 17:55:59.04: [32643]: <-- [9:AT+FTH=3\r]
apr 20 17:55:59.24: [32643]: --> [7:CONNECT]
apr 20 17:55:59.24: [32643]: <-- data [7]
apr 20 17:55:59.24: [32643]: <-- data [2]
apr 20 17:56:00.52: [32643]: --> [2:OK]
apr 20 17:56:00.52: [32643]: SEND send PPS (partial page signal)
apr 20 17:56:00.52: [32643]: SEND send MPS (more pages, same document)
apr 20 17:56:00.52: [32643]: <-- [9:AT+FRH=3\r]
apr 20 17:56:00.79: [32643]: --> [10:NO CARRIER]
apr 20 17:56:00.79: [32643]: MODEM No carrier
apr 20 17:56:00.79: [32643]: No response to PPS repeated 3 times.
apr 20 17:56:00.79: [32643]: SEND end page
apr 20 17:56:00.79: [32643]: SEND: Giving up after 3 attempts to send same page "docq/doc298.ps;f1", dirnum 0
apr 20 17:56:00.79: [32643]: DELAY 70 ms
apr 20 17:56:00.86: [32643]: <-- [9:AT+FTH=3\r]
apr 20 17:56:01.07: [32643]: --> [7:CONNECT]
apr 20 17:56:01.07: [32643]: <-- data [3]
apr 20 17:56:01.07: [32643]: <-- data [2]
apr 20 17:56:02.24: [32643]: --> [2:OK]
apr 20 17:56:03.24: [32643]: <-- [5:ATH0\r]
apr 20 17:56:03.48: [32643]: --> [2:OK]
apr 20 17:56:03.48: [32643]: SESSION END

tts:1271774512
killtime:1271785043
retrytime:0
state:7
npages:2
totpages:2
nskip:0
skippages:0
ncover:0
coverpages:0
ntries:0
ndials:0
totdials:1
maxdials:12
tottries:1
maxtries:3
pagewidth:215
resolution:196
pagelength:279
priority:127
schedpri:127
minbr:0
desiredbr:13
desiredst:0
desiredec:2
desireddf:3
desiredtl:0
useccover:1
usexvres:0
external:055255755
number:055255755
mailaddr:bernardo.volpi@xxxxxxxxxxxxxxxxx
sender:benfox
jobid:690
jobtag:
pagehandling:
modem:any
faxnumber:
tsi:
receiver:
company:
location:
voice:
fromcompany:
fromlocation:
fromvoice:
regarding:
comments:
cover:
client:11.0.0.18
owner:publica
groupid:690
signalrate:14400 bit/s
dataformat:1-D MH
jobtype:facsimile
tagline:
subaddr:
passwd:
doneop:default
commid:000000416
csi:055255755
nsf:Equipment:unknown :Station:
pagerange:
status:
statuscode:0
returned:2
notify:when done
pagechop:default
chopthreshold:3
!postscript:0::docq/doc297.ps

tts:1271778963
killtime:1271789208
retrytime:0
state:8
npages:0
totpages:2
nskip:0
skippages:0
ncover:0
coverpages:0
ntries:3
ndials:0
totdials:3
maxdials:12
tottries:3
maxtries:3
pagewidth:215
resolution:196
pagelength:279
priority:127
schedpri:125
minbr:0
desiredbr:13
desiredst:0
desiredec:2
desireddf:3
desiredtl:0
useccover:1
usexvres:0
external:0690160015
number:0690160015
mailaddr:bernardo.volpi@xxxxxxxxxxxxxxxxx
sender:benfox
jobid:695
jobtag:
pagehandling:e1Se1P
modem:any
faxnumber:
tsi:
receiver:
company:
location:
voice:
fromcompany:
fromlocation:
fromvoice:
regarding:
comments:
cover:
client:11.0.0.18
owner:publica
groupid:695
signalrate:14400 bit/s
dataformat:2-D MMR
jobtype:facsimile
tagline:
subaddr:
passwd:
doneop:default
commid:000000432
csi:0690380705
nsf:Equipment:unknown - Korea 82 :Station:
pagerange:
status:No response to PPS repeated 3 times.; Giving up after 3 attempts to send same page
statuscode:999
returned:1
notify:when done
pagechop:default
chopthreshold:3
!postscript:0::docq/doc298.ps

publica@artemide:/var/spool/hylafax/log$ faxstat -v
Trying localhost [2] (127.0.0.1) at port 4559...
Connected to localhost.
220 artemide server (HylaFAX (tm) Version 6.0.3) ready.
-> USER publica
331 Password required for publica.
Password:
-> PASS XXXX
230 User publica logged in.
-> TZONE LOCAL
200 Using time values in CET.
-> MDMFMT
200 Modem %m (%n): %s
-> EPRT |1|127.0.0.1|36916|
200 EPRT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on artemide: Running
Modem ttyS1 (+39.055.xxxxxxx): Running and idle
226 Transfer complete.

# $Id: usr-xon,v 1.11 2005/11/29 21:28:57 lhoward Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control. 
#
#
CountryCode:		"39 "
AreaCode:		"055 "
FAXNumber:		+39.055.xxxxxx
LongDistancePrefix:	0
InternationalPrefix:	00
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0666
LogFileMode:		0666
DeviceMode:		0666
RingsBeforeAnswer:	1
SpeakerVolume:		quiet
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"PublicaToscana"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
PercentGoodLines:	80
MaxRecvPages:		50
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use class 1 interface
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	xonxoff		# software flow control
#
ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
ModemResultCodesCmd:	ATQ0X4		# enable result codes
#
ModemMfrQueryCmd:	!USR
ModemModelQueryCmd:	ATI3
ModemRevQueryCmd:	ATI7		# XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd:		AT&H0&I0&R1	# setup modem for no flow control
Class1HFLOCmd:		AT&H1&I0&R2	# setup modem for hardware flow control
Class1SFLOCmd:		""		# modem does this automatically
#
# This should resolve "DIS/DTC received 3 times" errors:
#
Class1ResponseWaitCmd:	AT+FRS=1	# wait after sending TCF for response
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd:	AT+FCLASS=0	# leave modem idling in class 0
ModemAnswerCmd:		AT+FCLASS=1A	# answer in Class 1
#
# When using AT+FRS=n we see USR modems reset themselves in the middle of sessions
# this is not good.  So, we seem to work-around that problem by not using the
# command.  Unfortunately, this isn't an ideal thing.
#
Class1SwitchingCmd:	"<delay\0727>"
#
#
# eof

#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file.  Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility:		daemon		# syslog facility (want this 1st))
ServerTracing:		0x001		# just server operation
KillTime: 		"now + 5 day"
From:			xxxxxx
MailAddr:		fax@xxxxxxxxx
MaxDials:		4
MaxTries:		4
Notify:			done	
#PageChop:		all

#IdleTimeout:		900		# initial client idle timeout (secs)
#MaxIdleTimeout:	7200		# max client idle timeout (secs)
#MaxLoginAttempts:	5		# max # login attempts before disconnect
#MaxAdminAttempts:	5		# max # admin attempts before disconnect
#MaxConsecutiveBadCmds:	10		# max # invalid cmds before disconnect
#FaxContact:		FaxMaster	# who gets questions/complaints
#AdminGroup:		faxadmin	# which user group is admin (when using PAM)
#UserAccessFile:	"/etc/hosts.hfaxd"	# user+host access control file
#ShutdownFile:		"/etc/shutdown"	# server shutdown control filename
#XferLogFile:		"/etc/clientlog"	# for logging client file transfers
#FaxQFIFOName:		"/FIFO"		# FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
#JobFmt:		"%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
#RcvFmt:		"%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
#ModemFmt:		"Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
#FileFmt:		"%-7p %3l %8o %8s %-12.12m %.48f"

#
# SNPP-specific parameters.
#
#MaxMsgLength:		128		# max pager message length
#PagerIDMapFile:	"/etc/pagermap"	# file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time.  Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap:		"63 127 127 127 127 127 127  127  127  127  127  127"
#RetryTimeMap:		"30  60  60 180   0   0   0    0    0    0    0    0"
#KillTimeMap:		" 5   5   5  15  60 240 720 1440 1440 1440 1440 1440"