[hylafax-users] ERR COMREC invalid command received/no DIS or DTC

[voipas <voipas@xxxxxxxxx>]

Hi,

 

  I've a problem with one number to which I can't send fax. Maybe somebody can help me:

 

Apr 20 10:25:25.03: [13142]: SESSION BEGIN 000050900 22222222222
Apr 20 10:25:25.03: [13142]: HylaFAX (tm) Version 5.2.9
Apr 20 10:25:25.03: [13142]: SEND FAX: JOB 7220 DEST 22222222222 COMMID 000050900 DEVICE '/dev/ttyIAX1006' FROM 'voipas <voipas@xxxxxxxxx>' USER root
Apr 20 10:25:25.03: [13142]: STATE CHANGE: RUNNING -> SENDING
Apr 20 10:25:25.03: [13142]: <-- [12:AT+FCLASS=1\r]
Apr 20 10:25:25.03: [13142]: --> [2:OK]
Apr 20 10:25:25.03: [13142]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Apr 20 10:25:25.03: [13142]: <-- [36:AT+VSID="111111111","111111111"\r]
Apr 20 10:25:25.03: [13142]: --> [2:OK]
Apr 20 10:25:25.07: [13142]: DIAL 22222222222
Apr 20 10:25:25.07: [13142]: <-- [16:ATDT22222222222\r]
Apr 20 10:25:29.18: [13142]: --> [7:CONNECT]
Apr 20 10:25:30.86: [13142]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 20 10:25:30.86: [13142]: --> [2:OK]
Apr 20 10:25:30.86: [13142]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 20 10:25:30.86: [13142]: NSF remote fax equipment: HylaFAX
Apr 20 10:25:30.86: [13142]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 20 10:25:30.86: [13142]: <-- [9:AT+FRH=3\r]
Apr 20 10:25:31.60: [13142]: --> [7:CONNECT]
Apr 20 10:25:31.60: [13142]: --> HDLC<25:FF C0 02 B6 A6 26 F6 B6 1A 82 92 04 04 04 04 04 04 04 04 04 04 04 04 2A 64>
Apr 20 10:25:31.60: [13142]: --> [2:OK]
Apr 20 10:25:31.60: [13142]: REMOTE CSI "IAXmodem"
Apr 20 10:25:31.60: [13142]: <-- [9:AT+FRH=3\r]
Apr 20 10:25:38.60: [13142]: --> [0:]
Apr 20 10:25:38.60: [13142]: MODEM <Empty line>
Apr 20 10:25:38.60: [13142]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 20 10:25:38.60: [13142]: <-- data [1]
Apr 20 10:25:38.62: [13142]: --> [2:OK]
Apr 20 10:25:38.62: [13142]: COMREC invalid command received/no DIS or DTC {E125}
Apr 20 10:25:38.62: [13142]: SEND FAILED: JOB 7220 DEST 22222222222 ERR COMREC invalid command received/no DIS or DTC {E125}
Apr 20 10:25:38.62: [13142]: <-- [9:AT+FRS=7\r]
Apr 20 10:25:38.64: [13142]: --> [2:OK]
Apr 20 10:25:38.64: [13142]: <-- [9:AT+FTH=3\r]
Apr 20 10:25:38.66: [13142]: --> [7:CONNECT]
Apr 20 10:25:38.66: [13142]: <-- HDLC<3:FF C8 DF>
Apr 20 10:25:38.66: [13142]: <-- data [3]
Apr 20 10:25:38.66: [13142]: <-- data [2]
Apr 20 10:25:39.74: [13142]: --> [2:OK]
Apr 20 10:25:39.74: [13142]: MODEM input buffering enabled
Apr 20 10:25:40.74: [13142]: <-- [5:ATH0\r]
Apr 20 10:25:40.84: [13142]: --> [10:NO CARRIER]
Apr 20 10:25:40.84: [13142]: MODEM No carrier
Apr 20 10:25:40.84: [13142]: MODEM set DTR OFF
Apr 20 10:25:40.84: [13142]: MODEM set baud rate: 0 baud (flow control unchanged)
Apr 20 10:25:40.84: [13142]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 20 10:25:40.84: [13142]: SESSION END

Thanks
--
Best Regards,
Giedrius