 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] ERR COMREC invalid command received/no DIS or DTC
- To: hylafax-users@xxxxxxxxxxx
- Subject: Re: [hylafax-users] ERR COMREC invalid command received/no DIS or DTC
- From: voipas <voipas@xxxxxxxxx>
- Date: Thu, 22 Apr 2010 18:03:05 +0300
Hello,
I've upgraded Hylafax version and it didn't helped much:
Apr 22 17:43:11.56: [20852]: SESSION BEGIN 000051768 11111111111
Apr 22 17:43:11.56: [20852]: HylaFAX (tm) Version 5.4.1
Apr 22 17:43:11.56: [20852]: SEND FAX: JOB 7351 DEST 11111111111 COMMID 000051768 DEVICE '/dev/ttyIAX1005' FROM 'voipas <voipas@xxxxxxxxx>' USER root
Apr 22 17:43:11.56: [20852]: STATE CHANGE: RUNNING -> SENDING
Apr 22 17:43:11.56: [20852]: <-- [12:AT+FCLASS=1\r]
Apr 22 17:43:11.56: [20852]: --> [2:OK]
Apr 22 17:43:11.56: [20852]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Apr 22 17:43:11.56: [20852]: <-- [36:AT+VSID="2222222222","2222222222"\r]
Apr 22 17:43:11.56: [20852]: --> [2:OK]
Apr 22 17:43:11.58: [20852]: DIAL 11111111111
Apr 22 17:43:11.58: [20852]: <-- [16:ATDT11111111111\r]
Apr 22 17:43:15.95: [20852]: --> [7:CONNECT]
Apr 22 17:43:17.17: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:17.17: [20852]: --> [2:OK]
Apr 22 17:43:17.17: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:17.17: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:17.17: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:17.17: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:24.17: [20852]: --> [0:]
Apr 22 17:43:24.17: [20852]: MODEM <Empty line>
Apr 22 17:43:24.17: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:24.17: [20852]: <-- data [1]
Apr 22 17:43:24.19: [20852]: --> [2:OK]
Apr 22 17:43:24.19: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:24.19: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:24.21: [20852]: --> [2:OK]
Apr 22 17:43:24.21: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:25.87: [20852]: --> [7:CONNECT]
Apr 22 17:43:27.29: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:27.29: [20852]: --> [2:OK]
Apr 22 17:43:27.29: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:27.29: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:27.29: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:27.29: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:34.29: [20852]: --> [0:]
Apr 22 17:43:34.29: [20852]: MODEM <Empty line>
Apr 22 17:43:34.29: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:34.29: [20852]: <-- data [1]
Apr 22 17:43:34.31: [20852]: --> [2:OK]
Apr 22 17:43:34.31: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:34.31: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:34.33: [20852]: --> [2:OK]
Apr 22 17:43:34.33: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:35.95: [20852]: --> [7:CONNECT]
Apr 22 17:43:36.01: [20852]: --> [4:F8 00 10 03]
Apr 22 17:43:36.01: [20852]: --> [5:ERROR]
Apr 22 17:43:36.01: [20852]: MODEM Command error
Apr 22 17:43:36.01: [20852]: FCS error
Apr 22 17:43:36.01: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:38.97: [20852]: --> [2:OK]
Apr 22 17:43:38.97: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:38.99: [20852]: --> [7:CONNECT]
Apr 22 17:43:38.99: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:38.99: [20852]: <-- data [3]
Apr 22 17:43:38.99: [20852]: <-- data [2]
Apr 22 17:43:40.07: [20852]: --> [2:OK]
Apr 22 17:43:40.07: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:40.07: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:40.45: [20852]: --> [7:CONNECT]
Apr 22 17:43:41.43: [20852]: --> [10:NO CARRIER]
Apr 22 17:43:41.43: [20852]: MODEM No carrier
Apr 22 17:43:41.43: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:43.63: [20852]: --> [2:OK]
Apr 22 17:43:43.63: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:43.65: [20852]: --> [7:CONNECT]
Apr 22 17:43:43.65: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:43.65: [20852]: <-- data [3]
Apr 22 17:43:43.65: [20852]: <-- data [2]
Apr 22 17:43:44.71: [20852]: --> [2:OK]
Apr 22 17:43:44.71: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:44.71: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:45.07: [20852]: --> [7:CONNECT]
Apr 22 17:43:45.45: [20852]: --> [10:NO CARRIER]
Apr 22 17:43:45.45: [20852]: MODEM No carrier
Apr 22 17:43:45.45: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:48.27: [20852]: --> [2:OK]
Apr 22 17:43:48.27: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:48.29: [20852]: --> [7:CONNECT]
Apr 22 17:43:48.29: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:48.29: [20852]: <-- data [3]
Apr 22 17:43:48.29: [20852]: <-- data [2]
Apr 22 17:43:49.37: [20852]: --> [2:OK]
Apr 22 17:43:49.37: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:49.37: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:50.17: [20852]: --> [7:CONNECT]
Apr 22 17:43:51.41: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:51.41: [20852]: --> [2:OK]
Apr 22 17:43:51.41: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:51.41: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:51.41: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:51.41: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:58.41: [20852]: --> [0:]
Apr 22 17:43:58.41: [20852]: MODEM <Empty line>
Apr 22 17:43:58.41: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:58.41: [20852]: <-- data [1]
Apr 22 17:43:58.43: [20852]: --> [2:OK]
Apr 22 17:43:58.43: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:58.43: [20852]: SEND FAILED: JOB 7351 DEST 11111111111 ERR COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:58.43: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:58.45: [20852]: --> [2:OK]
Apr 22 17:43:58.45: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:58.45: [20852]: --> [7:CONNECT]
Apr 22 17:43:58.45: [20852]: <-- HDLC<3:FF C8 DF>
Apr 22 17:43:58.45: [20852]: <-- data [3]
Apr 22 17:43:58.45: [20852]: <-- data [2]
Apr 22 17:43:59.53: [20852]: --> [2:OK]
Apr 22 17:43:59.53: [20852]: MODEM input buffering enabled
Apr 22 17:44:00.53: [20852]: <-- [5:ATH0\r]
Apr 22 17:44:00.63: [20852]: --> [10:NO CARRIER]
Apr 22 17:44:00.63: [20852]: MODEM No carrier
Apr 22 17:44:00.63: [20852]: MODEM set DTR OFF
Apr 22 17:44:00.63: [20852]: MODEM set baud rate: 0 baud (flow control unchanged)
Apr 22 17:44:00.63: [20852]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 22 17:44:00.63: [20852]: SESSION END
--
Best Regards,
Giedrius
Apr 22 17:43:11.56: [20852]: HylaFAX (tm) Version 5.4.1
Apr 22 17:43:11.56: [20852]: SEND FAX: JOB 7351 DEST 11111111111 COMMID 000051768 DEVICE '/dev/ttyIAX1005' FROM 'voipas <voipas@xxxxxxxxx>' USER root
Apr 22 17:43:11.56: [20852]: STATE CHANGE: RUNNING -> SENDING
Apr 22 17:43:11.56: [20852]: <-- [12:AT+FCLASS=1\r]
Apr 22 17:43:11.56: [20852]: --> [2:OK]
Apr 22 17:43:11.56: [20852]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Apr 22 17:43:11.56: [20852]: <-- [36:AT+VSID="2222222222","2222222222"\r]
Apr 22 17:43:11.56: [20852]: --> [2:OK]
Apr 22 17:43:11.58: [20852]: DIAL 11111111111
Apr 22 17:43:11.58: [20852]: <-- [16:ATDT11111111111\r]
Apr 22 17:43:15.95: [20852]: --> [7:CONNECT]
Apr 22 17:43:17.17: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:17.17: [20852]: --> [2:OK]
Apr 22 17:43:17.17: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:17.17: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:17.17: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:17.17: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:24.17: [20852]: --> [0:]
Apr 22 17:43:24.17: [20852]: MODEM <Empty line>
Apr 22 17:43:24.17: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:24.17: [20852]: <-- data [1]
Apr 22 17:43:24.19: [20852]: --> [2:OK]
Apr 22 17:43:24.19: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:24.19: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:24.21: [20852]: --> [2:OK]
Apr 22 17:43:24.21: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:25.87: [20852]: --> [7:CONNECT]
Apr 22 17:43:27.29: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:27.29: [20852]: --> [2:OK]
Apr 22 17:43:27.29: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:27.29: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:27.29: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:27.29: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:34.29: [20852]: --> [0:]
Apr 22 17:43:34.29: [20852]: MODEM <Empty line>
Apr 22 17:43:34.29: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:34.29: [20852]: <-- data [1]
Apr 22 17:43:34.31: [20852]: --> [2:OK]
Apr 22 17:43:34.31: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:34.31: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:34.33: [20852]: --> [2:OK]
Apr 22 17:43:34.33: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:35.95: [20852]: --> [7:CONNECT]
Apr 22 17:43:36.01: [20852]: --> [4:F8 00 10 03]
Apr 22 17:43:36.01: [20852]: --> [5:ERROR]
Apr 22 17:43:36.01: [20852]: MODEM Command error
Apr 22 17:43:36.01: [20852]: FCS error
Apr 22 17:43:36.01: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:38.97: [20852]: --> [2:OK]
Apr 22 17:43:38.97: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:38.99: [20852]: --> [7:CONNECT]
Apr 22 17:43:38.99: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:38.99: [20852]: <-- data [3]
Apr 22 17:43:38.99: [20852]: <-- data [2]
Apr 22 17:43:40.07: [20852]: --> [2:OK]
Apr 22 17:43:40.07: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:40.07: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:40.45: [20852]: --> [7:CONNECT]
Apr 22 17:43:41.43: [20852]: --> [10:NO CARRIER]
Apr 22 17:43:41.43: [20852]: MODEM No carrier
Apr 22 17:43:41.43: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:43.63: [20852]: --> [2:OK]
Apr 22 17:43:43.63: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:43.65: [20852]: --> [7:CONNECT]
Apr 22 17:43:43.65: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:43.65: [20852]: <-- data [3]
Apr 22 17:43:43.65: [20852]: <-- data [2]
Apr 22 17:43:44.71: [20852]: --> [2:OK]
Apr 22 17:43:44.71: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:44.71: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:45.07: [20852]: --> [7:CONNECT]
Apr 22 17:43:45.45: [20852]: --> [10:NO CARRIER]
Apr 22 17:43:45.45: [20852]: MODEM No carrier
Apr 22 17:43:45.45: [20852]: <-- [10:AT+FRS=21\r]
Apr 22 17:43:48.27: [20852]: --> [2:OK]
Apr 22 17:43:48.27: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:48.29: [20852]: --> [7:CONNECT]
Apr 22 17:43:48.29: [20852]: <-- HDLC<3:FF C8 D8>
Apr 22 17:43:48.29: [20852]: <-- data [3]
Apr 22 17:43:48.29: [20852]: <-- data [2]
Apr 22 17:43:49.37: [20852]: --> [2:OK]
Apr 22 17:43:49.37: [20852]: SEND send CRP (command repeat)
Apr 22 17:43:49.37: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:50.17: [20852]: --> [7:CONNECT]
Apr 22 17:43:51.41: [20852]: --> HDLC<34:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C 87 60>
Apr 22 17:43:51.41: [20852]: --> [2:OK]
Apr 22 17:43:51.41: [20852]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 34 2E 34"
Apr 22 17:43:51.41: [20852]: NSF remote fax equipment: HylaFAX
Apr 22 17:43:51.41: [20852]: NSF remote station ID: "HylaFAX (tm) Version 4.4.4"
Apr 22 17:43:51.41: [20852]: <-- [9:AT+FRH=3\r]
Apr 22 17:43:58.41: [20852]: --> [0:]
Apr 22 17:43:58.41: [20852]: MODEM <Empty line>
Apr 22 17:43:58.41: [20852]: MODEM TIMEOUT: waiting for v.21 carrier
Apr 22 17:43:58.41: [20852]: <-- data [1]
Apr 22 17:43:58.43: [20852]: --> [2:OK]
Apr 22 17:43:58.43: [20852]: COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:58.43: [20852]: SEND FAILED: JOB 7351 DEST 11111111111 ERR COMREC invalid command received/no DIS or DTC {E125}
Apr 22 17:43:58.43: [20852]: <-- [9:AT+FRS=7\r]
Apr 22 17:43:58.45: [20852]: --> [2:OK]
Apr 22 17:43:58.45: [20852]: <-- [9:AT+FTH=3\r]
Apr 22 17:43:58.45: [20852]: --> [7:CONNECT]
Apr 22 17:43:58.45: [20852]: <-- HDLC<3:FF C8 DF>
Apr 22 17:43:58.45: [20852]: <-- data [3]
Apr 22 17:43:58.45: [20852]: <-- data [2]
Apr 22 17:43:59.53: [20852]: --> [2:OK]
Apr 22 17:43:59.53: [20852]: MODEM input buffering enabled
Apr 22 17:44:00.53: [20852]: <-- [5:ATH0\r]
Apr 22 17:44:00.63: [20852]: --> [10:NO CARRIER]
Apr 22 17:44:00.63: [20852]: MODEM No carrier
Apr 22 17:44:00.63: [20852]: MODEM set DTR OFF
Apr 22 17:44:00.63: [20852]: MODEM set baud rate: 0 baud (flow control unchanged)
Apr 22 17:44:00.63: [20852]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 22 17:44:00.63: [20852]: SESSION END
--
Best Regards,
Giedrius
- Follow-Ups:
- References:
- Prev by Date: [hylafax-users] Issue with Digi Accelport ras modem
- Next by Date: [hylafax-users] faxmail fork bomb
- Previous by thread: [hylafax-users] ERR COMREC invalid command received/no DIS or DTC
- Next by thread: Re: [hylafax-users] ERR COMREC invalid command received/no DIS or DTC
- Index(es):
Project hosted by iFAX Solutions