[hylafax-users] asterisk 1.6.2.5 hylafax iaxmodem

["hooble@xxxxxxx" <hooble@xxxxxxx>]

Hello list,

i have a problem with asterisk 1.6.2.5, hylafax 5.4.1 and iaxmodem 1.2.0.
I can't receive fax and can't send fax to isdn, here is the sessionlog.
Under asterisk 1.4.19.2 works the same config fine!

Session:
SESSION BEGIN 000000244
Mar 07 12:29:37.69: [ 3364]: HylaFAX (tm) Version 5.4.1
Mar 07 12:29:37.69: [ 3364]: CallID: '12345678901' '' '<NONE>' ''
Mar 07 12:29:37.69: [ 3364]: <-- [4:ATA\r]
Mar 07 12:29:41.42: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:41.42: [ 3364]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyIAX0'
Mar 07 12:29:41.42: [ 3364]: RECV FAX: begin
Mar 07 12:29:41.42: [ 3364]: <-- data [32]
Mar 07 12:29:41.42: [ 3364]: <-- data [2]
Mar 07 12:29:42.34: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:42.34: [ 3364]: <-- data [23]
Mar 07 12:29:42.34: [ 3364]: <-- data [2]
Mar 07 12:29:43.10: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:43.10: [ 3364]: <-- data [13]
Mar 07 12:29:43.10: [ 3364]: <-- data [2]
Mar 07 12:29:43.69: [ 3364]: --> [2:OK]
Mar 07 12:29:43.69: [ 3364]: <-- [9:AT+FRH=3\r]
Mar 07 12:29:44.37: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:45.31: [ 3364]: --> [2:OK]
Mar 07 12:29:45.31: [ 3364]: RECV recv CRP (command repeat)
Mar 07 12:29:45.31: [ 3364]: <-- [9:AT+FTH=3\r]
Mar 07 12:29:45.33: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:45.33: [ 3364]: <-- data [32]
Mar 07 12:29:45.33: [ 3364]: <-- data [2]
Mar 07 12:29:47.12: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:47.12: [ 3364]: <-- data [23]
Mar 07 12:29:47.12: [ 3364]: <-- data [2]
Mar 07 12:29:47.86: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:47.86: [ 3364]: <-- data [13]
Mar 07 12:29:47.86: [ 3364]: <-- data [2]
Mar 07 12:29:48.44: [ 3364]: --> [2:OK]
Mar 07 12:29:48.44: [ 3364]: <-- [9:AT+FRH=3\r]
Mar 07 12:29:55.44: [ 3364]: --> [0:]
Mar 07 12:29:55.44: [ 3364]: MODEM <Empty line>
Mar 07 12:29:55.44: [ 3364]: <-- data [1]
Mar 07 12:29:55.45: [ 3364]: --> [2:OK]
Mar 07 12:29:55.45: [ 3364]: <-- [9:AT+FTH=3\r]
Mar 07 12:29:55.46: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:55.46: [ 3364]: <-- data [32]
Mar 07 12:29:55.46: [ 3364]: <-- data [2]
Mar 07 12:29:57.24: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:57.24: [ 3364]: <-- data [23]
Mar 07 12:29:57.24: [ 3364]: <-- data [2]
Mar 07 12:29:57.98: [ 3364]: --> [7:CONNECT]
Mar 07 12:29:57.98: [ 3364]: <-- data [13]
Mar 07 12:29:57.98: [ 3364]: <-- data [2]
Mar 07 12:29:58.56: [ 3364]: --> [2:OK]
Mar 07 12:29:58.56: [ 3364]: <-- [9:AT+FRH=3\r]
Mar 07 12:30:05.56: [ 3364]: --> [0:]
Mar 07 12:30:05.56: [ 3364]: MODEM <Empty line>
Mar 07 12:30:05.56: [ 3364]: <-- data [1]
Mar 07 12:30:05.57: [ 3364]: --> [2:OK]
Mar 07 12:30:05.57: [ 3364]: <-- [9:AT+FTH=3\r]
Mar 07 12:30:05.58: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:05.58: [ 3364]: <-- data [32]
Mar 07 12:30:05.58: [ 3364]: <-- data [2]
Mar 07 12:30:07.36: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:07.36: [ 3364]: <-- data [23]
Mar 07 12:30:07.36: [ 3364]: <-- data [2]
Mar 07 12:30:08.10: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:08.10: [ 3364]: <-- data [13]
Mar 07 12:30:08.10: [ 3364]: <-- data [2]
Mar 07 12:30:08.68: [ 3364]: --> [2:OK]
Mar 07 12:30:08.68: [ 3364]: <-- [9:AT+FRH=3\r]
Mar 07 12:30:15.68: [ 3364]: --> [0:]
Mar 07 12:30:15.68: [ 3364]: MODEM <Empty line>
Mar 07 12:30:15.68: [ 3364]: <-- data [1]
Mar 07 12:30:15.69: [ 3364]: --> [2:OK]
Mar 07 12:30:15.69: [ 3364]: <-- [9:AT+FTH=3\r]
Mar 07 12:30:15.71: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:15.71: [ 3364]: <-- data [32]
Mar 07 12:30:15.71: [ 3364]: <-- data [2]
Mar 07 12:30:17.48: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:17.48: [ 3364]: <-- data [23]
Mar 07 12:30:17.48: [ 3364]: <-- data [2]
Mar 07 12:30:18.22: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:18.22: [ 3364]: <-- data [13]
Mar 07 12:30:18.22: [ 3364]: <-- data [2]
Mar 07 12:30:18.80: [ 3364]: --> [2:OK]
Mar 07 12:30:18.80: [ 3364]: <-- [9:AT+FRH=3\r]
Mar 07 12:30:25.53: [ 3364]: --> [7:CONNECT]
Mar 07 12:30:26.47: [ 3364]: --> [2:OK]
Mar 07 12:30:26.47: [ 3364]: RECV recv DCN (disconnect)
Mar 07 12:30:26.47: [ 3364]: RECV FAX: RSPREC error/got DCN (sender
abort) {E103}
Mar 07 12:30:26.47: [ 3364]: RECV FAX: end
Mar 07 12:30:26.47: [ 3364]: RSPREC error/got DCN (sender abort) {E103}
Mar 07 12:30:26.47: [ 3364]: SESSION END

------------------------------------------------------------------------------------------------------------------------------------------------
config.ttyIAX0/1/2/3/4:

# $Id: iaxmodem,v 1.1 2006/04/02 23:18:30 darren Exp $

#
# prototype config for the IAXmodem softmodem which uses
# the spandsp soft-DSP library
#

#
CountryCode:        49
AreaCode:       
FAXNumber:       
LongDistancePrefix:    0
InternationalPrefix:    00
DialStringRules:    etc/dialrules
ServerTracing:        1
SessionTracing:        11
RecvFileMode:        0644
LogFileMode:        0600
DeviceMode:        0600
RingsBeforeAnswer:    1
SpeakerVolume:        off
GettyArgs:        "-h %l dx_%s"
#LocalIdentifier:    Carbon
TagLineFont:        etc/lutRS18.pcf
TagLineFormat:        "Von %%l|%c|Seite %%P / %%T"
MaxRecvPages:        51
PercentGoodLines:    80
UseJobTSI:              Yes
#

#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:        Class1        # use this to supply a hint

#
# The modem is taken off-hook during initialization, and then
# placed back on-hook when done to prevent glare.
#
#ModemDialCmd:           AT+VSID="2","2158258700"\nATDT%s
ModemSetOriginCmd:    AT+VSID="%s","%d"
##ModemResetCmds:        "ATH1\nAT+VCID=1"    # enables CallID display
##ModemReadyCmds:        ATH0
ModemResetCmds:        AT+VCID=1
ModemFlowControl    XON
Class1AdaptRecvCmd:    AT+FAR=1
Class1TMConnectDelay:    400        # counteract quick CONNECT response
Class1RMQueryCmd:    "!24,48,72,96"    # V.17 fast-train recv doesn't
work well

CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:        "ANID="
CallIDPattern:          "NDID="
# Uncomment these if you really want them, but you probably don't.
#CallIDPattern:          "DATE="
#CallIDPattern:          "TIME="

Can anyone help me pls?
Thanks.


best regards Sven


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*