Re: [hylafax-users] Faxaddmodem with Mainpine IQ Express R3.2

[Lee Howard <lee.howard@xxxxxxxxxxxx>]

Samuel Zats wrote:
> I believe that I've gone through all the steps correctly and have 
> rebuilt my Centos 5.2 with updated kernel (3 downloaded patches) and 
> the mainpine-10 driver.
>
> Running faxconfig works fine. Takes me to faxaddmodem where I'm asked 
> to include the serial port that the modem is connected to.
>
> I've now tried both: ttyS0 and ttyS1 = both result in series of config 
> questions and end up closing the terminal once it tries

Almost never will the IQ Express appear as ttyS0 or ttyS1.  Look through 
your 'dmesg' output to see where the Linux kernel serial driver put the 
ports.  (E.g., rung 'dmesg | grep ttyS'.)

Normally it will be /dev/ttyS4, /dev/ttyS5, etc.

Thanks,

Lee.

--
*Lee Howard*
*Mainpine, Inc. Software Development Lead*
Tel: +1 866 363 6680 ext 805 | Fax: +1 360 462 8160
lee.howard@xxxxxxxxxxxx | www.mainpine.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*