 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Reading a log...
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Reading a log...
- From: "Jorge Saraceno - Alicom Argentina" <JSaraceno@xxxxxxxxxxxxx>
- Date: Mon, 16 Mar 2009 16:09:04 -0300
Hi Guys,
Pls, can anybody tell me which is the error in the following log?
I don't know how to read it...
This is a CentOS 5.2, HylaFax 5.2.9 and Diva Analog 8 port fax card
faxserver...
Mar 16 15:14:15.67: [31804]: SESSION BEGIN 000001251 11111111
Mar 16 15:14:15.67: [31804]: HylaFAX (tm) Version 5.2.9
Mar 16 15:14:15.67: [31804]: MODEM set XON/XOFF/FLUSH: input ignored, output
disabled
Mar 16 15:14:15.67: [31804]: <-- [4:ATA\r]
Mar 16 15:14:20.30: [31804]: --> [7:CONNECT]
Mar 16 15:14:20.30: [31804]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyds01'
Mar 16 15:14:20.30: [31804]: STATE CHANGE: ANSWERING -> RECEIVING
Mar 16 15:14:20.30: [31804]: RECV FAX: begin
Mar 16 15:14:20.30: [31804]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 AC 74 4C 74 9C>
Mar 16 15:14:20.30: [31804]: <-- data [32]
Mar 16 15:14:20.30: [31804]: <-- data [2]
Mar 16 15:14:21.25: [31804]: --> [7:CONNECT]
Mar 16 15:14:21.25: [31804]: <-- HDLC<23:FF C0 02 72 32 CE A6 76 F6 96 C6 F6
B6 F6 4E 0A 04 04 04 04 04 04 04>
Mar 16 15:14:21.25: [31804]: <-- data [23]
Mar 16 15:14:21.25: [31804]: <-- data [2]
Mar 16 15:14:21.97: [31804]: --> [7:CONNECT]
Mar 16 15:14:21.97: [31804]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01
18>
Mar 16 15:14:21.97: [31804]: <-- data [13]
Mar 16 15:14:21.97: [31804]: <-- data [2]
Mar 16 15:14:23.38: [31804]: --> [2:OK]
Mar 16 15:14:23.38: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:14:25.69: [31804]: --> [7:CONNECT]
Mar 16 15:14:25.71: [31804]: --> [2:10 03]
Mar 16 15:14:25.71: [31804]: --> [5:ERROR]
Mar 16 15:14:25.71: [31804]: MODEM Command error
Mar 16 15:14:25.71: [31804]: FCS error
Mar 16 15:14:25.71: [31804]: <-- [10:AT+FRS=21\r]
Mar 16 15:14:25.71: [31804]: --> [2:OK]
Mar 16 15:14:25.71: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:14:25.79: [31804]: --> [7:CONNECT]
Mar 16 15:14:25.79: [31804]: <-- HDLC<3:FF C8 58>
Mar 16 15:14:25.79: [31804]: <-- data [3]
Mar 16 15:14:25.79: [31804]: <-- data [2]
Mar 16 15:14:26.96: [31804]: --> [2:OK]
Mar 16 15:14:26.96: [31804]: RECV send CRP (command repeat)
Mar 16 15:14:26.96: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:14:29.19: [31804]: --> [7:CONNECT]
Mar 16 15:14:29.21: [31804]: --> [2:10 03]
Mar 16 15:14:29.21: [31804]: --> [5:ERROR]
Mar 16 15:14:29.21: [31804]: MODEM Command error
Mar 16 15:14:29.21: [31804]: FCS error
Mar 16 15:14:29.21: [31804]: <-- [10:AT+FRS=21\r]
Mar 16 15:14:29.21: [31804]: --> [2:OK]
Mar 16 15:14:29.21: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:14:29.29: [31804]: --> [7:CONNECT]
Mar 16 15:14:29.29: [31804]: <-- HDLC<3:FF C8 58>
Mar 16 15:14:29.29: [31804]: <-- data [3]
Mar 16 15:14:29.29: [31804]: <-- data [2]
Mar 16 15:14:30.46: [31804]: --> [2:OK]
Mar 16 15:14:30.46: [31804]: RECV send CRP (command repeat)
Mar 16 15:14:30.46: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:14:37.46: [31804]: --> [0:]
Mar 16 15:14:37.46: [31804]: MODEM <Empty line>
Mar 16 15:14:37.46: [31804]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 16 15:14:37.46: [31804]: <-- data [1]
Mar 16 15:14:37.46: [31804]: --> [2:]
Mar 16 15:14:37.46: [31804]: --> [2:OK]
Mar 16 15:14:37.46: [31804]: <-- [9:AT+FRS=7\r]
Mar 16 15:14:37.46: [31804]: --> [2:OK]
Mar 16 15:14:37.46: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:14:38.73: [31804]: --> [7:CONNECT]
Mar 16 15:14:38.73: [31804]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 AC 74 4C 74 9C>
Mar 16 15:14:38.73: [31804]: <-- data [32]
Mar 16 15:14:38.73: [31804]: <-- data [2]
Mar 16 15:14:39.67: [31804]: --> [7:CONNECT]
Mar 16 15:14:39.67: [31804]: <-- HDLC<23:FF C0 02 72 32 CE A6 76 F6 96 C6 F6
B6 F6 4E 0A 04 04 04 04 04 04 04>
Mar 16 15:14:39.67: [31804]: <-- data [23]
Mar 16 15:14:39.67: [31804]: <-- data [2]
Mar 16 15:14:40.39: [31804]: --> [7:CONNECT]
Mar 16 15:14:40.39: [31804]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01
18>
Mar 16 15:14:40.39: [31804]: <-- data [13]
Mar 16 15:14:40.39: [31804]: <-- data [2]
Mar 16 15:14:41.81: [31804]: --> [2:OK]
Mar 16 15:14:41.81: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:14:48.81: [31804]: --> [0:]
Mar 16 15:14:48.81: [31804]: MODEM <Empty line>
Mar 16 15:14:48.81: [31804]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 16 15:14:48.81: [31804]: <-- data [1]
Mar 16 15:14:48.81: [31804]: --> [2:]
Mar 16 15:14:48.81: [31804]: --> [2:OK]
Mar 16 15:14:48.81: [31804]: <-- [9:AT+FRS=7\r]
Mar 16 15:14:48.81: [31804]: --> [2:OK]
Mar 16 15:14:48.81: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:14:50.08: [31804]: --> [7:CONNECT]
Mar 16 15:14:50.08: [31804]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 AC 74 4C 74 9C>
Mar 16 15:14:50.08: [31804]: <-- data [32]
Mar 16 15:14:50.08: [31804]: <-- data [2]
Mar 16 15:14:51.03: [31804]: --> [7:CONNECT]
Mar 16 15:14:51.03: [31804]: <-- HDLC<23:FF C0 02 72 32 CE A6 76 F6 96 C6 F6
B6 F6 4E 0A 04 04 04 04 04 04 04>
Mar 16 15:14:51.03: [31804]: <-- data [23]
Mar 16 15:14:51.03: [31804]: <-- data [2]
Mar 16 15:14:51.75: [31804]: --> [7:CONNECT]
Mar 16 15:14:51.75: [31804]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01
18>
Mar 16 15:14:51.75: [31804]: <-- data [13]
Mar 16 15:14:51.75: [31804]: <-- data [2]
Mar 16 15:14:53.15: [31804]: --> [2:OK]
Mar 16 15:14:53.15: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:14:57.19: [31804]: --> [7:CONNECT]
Mar 16 15:14:57.21: [31804]: --> [2:10 03]
Mar 16 15:14:57.21: [31804]: --> [5:ERROR]
Mar 16 15:14:57.21: [31804]: MODEM Command error
Mar 16 15:14:57.21: [31804]: FCS error
Mar 16 15:14:57.21: [31804]: <-- [10:AT+FRS=21\r]
Mar 16 15:14:57.21: [31804]: --> [2:OK]
Mar 16 15:14:57.21: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:14:57.29: [31804]: --> [7:CONNECT]
Mar 16 15:14:57.29: [31804]: <-- HDLC<3:FF C8 58>
Mar 16 15:14:57.29: [31804]: <-- data [3]
Mar 16 15:14:57.29: [31804]: <-- data [2]
Mar 16 15:14:58.45: [31804]: --> [2:OK]
Mar 16 15:14:58.45: [31804]: RECV send CRP (command repeat)
Mar 16 15:14:58.45: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:15:00.71: [31804]: --> [7:CONNECT]
Mar 16 15:15:00.72: [31804]: --> [2:10 03]
Mar 16 15:15:00.72: [31804]: --> [5:ERROR]
Mar 16 15:15:00.72: [31804]: MODEM Command error
Mar 16 15:15:00.72: [31804]: FCS error
Mar 16 15:15:00.72: [31804]: <-- [10:AT+FRS=21\r]
Mar 16 15:15:00.72: [31804]: --> [2:OK]
Mar 16 15:15:00.72: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:15:00.81: [31804]: --> [7:CONNECT]
Mar 16 15:15:00.81: [31804]: <-- HDLC<3:FF C8 58>
Mar 16 15:15:00.81: [31804]: <-- data [3]
Mar 16 15:15:00.81: [31804]: <-- data [2]
Mar 16 15:15:01.97: [31804]: --> [2:OK]
Mar 16 15:15:01.97: [31804]: RECV send CRP (command repeat)
Mar 16 15:15:01.97: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:15:04.19: [31804]: --> [7:CONNECT]
Mar 16 15:15:04.21: [31804]: --> [2:10 03]
Mar 16 15:15:04.21: [31804]: --> [5:ERROR]
Mar 16 15:15:04.21: [31804]: MODEM Command error
Mar 16 15:15:04.21: [31804]: FCS error
Mar 16 15:15:04.21: [31804]: <-- [10:AT+FRS=21\r]
Mar 16 15:15:04.21: [31804]: --> [2:OK]
Mar 16 15:15:04.21: [31804]: <-- [9:AT+FTH=3\r]
Mar 16 15:15:04.29: [31804]: --> [7:CONNECT]
Mar 16 15:15:04.29: [31804]: <-- HDLC<3:FF C8 58>
Mar 16 15:15:04.29: [31804]: <-- data [3]
Mar 16 15:15:04.29: [31804]: <-- data [2]
Mar 16 15:15:05.46: [31804]: --> [2:OK]
Mar 16 15:15:05.46: [31804]: RECV send CRP (command repeat)
Mar 16 15:15:05.46: [31804]: <-- [9:AT+FRH=3\r]
Mar 16 15:15:07.69: [31804]: --> [7:CONNECT]
Mar 16 15:15:07.71: [31804]: --> [2:10 03]
Mar 16 15:15:07.71: [31804]: --> [5:ERROR]
Mar 16 15:15:07.71: [31804]: MODEM Command error
Mar 16 15:15:07.71: [31804]: FCS error
Mar 16 15:15:07.71: [31804]: RECV FAX: No sender protocol (T.30 T1 timeout)
{E102}
Mar 16 15:15:07.71: [31804]: RECV FAX: end
Mar 16 15:15:07.71: [31804]: No sender protocol (T.30 T1 timeout) {E102}
Mar 16 15:15:07.71: [31804]: SESSION END
Thanks in advance
Best regards,
Jorge Saraceno
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Reading a log...
- From: Lee Howard
- Re: [hylafax-users] Reading a log...
- Prev by Date: [hylafax-users] problems with incoming faxes
- Next by Date: [hylafax-users] Error on an odd receiving
- Previous by thread: [hylafax-users] problems with incoming faxes
- Next by thread: Re: [hylafax-users] Reading a log...
- Index(es):
Project hosted by iFAX Solutions