Re: [hylafax-users] Hylafax + Zyxel Omni 56K

[voznjuk konstantin <kvoznjuk@xxxxxxxxx>]

Ok, I still without answer for my question. Let me remind: I have office PBX with dedicated fax port (extension) any other devices on that line. I put another "hardware" fax on another port of same PBX and try to send test fax. Modem configured for work in class2 mode. In result I have I log:
cat ./c000000068
Mar 05 14:37:46.38: [ 4023]: SESSION BEGIN 000000068 380444955324
Mar 05 14:37:46.38: [ 4023]: HylaFAX (tm) Version 4.4.4
Mar 05 14:37:46.38: [ 4023]: <-- [4:ATA\r]
Mar 05 14:38:02.72: [ 4023]: --> [5:+FCON]
Mar 05 14:38:02.72: [ 4023]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM0'
Mar 05 14:38:02.72: [ 4023]: RECV FAX: begin
Mar 05 14:38:02.72: [ 4023]: --> [8:+FDCS:0,]
Mar 05 14:38:02.72: [ 4023]: MODEM protocol botch, can not parse "0,"
Mar 05 14:38:02.72: [ 4023]: REMOTE HANGUP: COMREC error (code 72)
Mar 05 14:38:02.73: [ 4023]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Mar 05 14:38:02.73: [ 4023]: REMOTE wants 9600 bit/s
Mar 05 14:38:02.73: [ 4023]: REMOTE wants A4 page width (215 mm)
Mar 05 14:38:02.73: [ 4023]: REMOTE wants unlimited page length
Mar 05 14:38:02.73: [ 4023]: REMOTE wants 3.85 line/mm
Mar 05 14:38:02.73: [ 4023]: REMOTE wants 2-D MR
Mar 05 14:38:02.73: [ 4023]: --> [2:OK]
Mar 05 14:38:02.73: [ 4023]: <-- [7:AT+FDR\r]
Mar 05 14:38:05.93: [ 4023]: --> [5:+FCFR]
Mar 05 14:38:07.12: [ 4023]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Mar 05 14:38:07.12: [ 4023]: REMOTE wants 9600 bit/s
Mar 05 14:38:07.12: [ 4023]: REMOTE wants A4 page width (215 mm)
Mar 05 14:38:07.12: [ 4023]: REMOTE wants unlimited page length
Mar 05 14:38:07.12: [ 4023]: REMOTE wants 3.85 line/mm
Mar 05 14:38:07.12: [ 4023]: REMOTE wants 2-D MR
Mar 05 14:38:07.12: [ 4023]: --> [7:CONNECT]
Mar 05 14:38:07.12: [ 4023]: RECV: begin page
Mar 05 14:38:07.12: [ 4023]: RECV: send trigger 022
Mar 05 14:38:07.12: [ 4023]: <-- data [1]
Mar 05 14:38:07.12: [ 4023]: Copy quality checking performed by host
Mar 05 14:38:29.05: [ 4023]: RECV: 1156 total lines, 0 bad lines, 3 consecutive bad lines
Mar 05 14:38:30.40: [ 4023]: --> [18:+FPTS:1,1158,0,0,0]
Mar 05 14:38:30.40: [ 4023]: --> [6:+FET:2]
Mar 05 14:38:30.40: [ 4023]: RECV recv EOP (no more pages or documents)
Mar 05 14:38:30.40: [ 4023]: --> [2:OK]
Mar 05 14:38:30.40: [ 4023]: RECV send MCF (message confirmation)
Mar 05 14:38:30.40: [ 4023]: RECV FAX (000000068): from <UNSPECIFIED>, page 1 in 0:27, INF, 3.85 line/mm, 2-D MR, 9600 bit/s
Mar 05 14:38:30.40: [ 4023]: RECV FAX (000000068): recvq/fax000000048.tif from <UNSPECIFIED>, route to <unspecified>, 1 pages in 0:28
Mar 05 14:38:30.40: [ 4023]: <-- [7:AT+FDR\r]
Mar 05 14:38:33.35: [ 4023]: --> [8:+FHNG:00]
Mar 05 14:38:33.35: [ 4023]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Mar 05 14:38:33.35: [ 4023]: RECV FAX: bin/faxrcvd "recvq/fax000000048.tif" "ttyACM0" "000000068" ""
Mar 05 14:38:33.35: [ 4023]: RECV FAX: end
Mar 05 14:38:33.35: [ 4023]: SESSION END

and haven't fax. In log file mentioned 1 page and file fax00000048.tif..... Please beleave me I loock averywhere....  



25.02.09, 21:00, "voznjuk konstantin" <kvoznjuk@xxxxxxxxx>:

> :) No! No any additional fax machine. I don't know why you think so, but I have Panas TDE 100 with DISA and just one modem on dedicated extension port of PBX. Test faxes I sent from nextdoor office through external ( city ) lines.
> Ok. More that, after same experiments I change fax type to class2. In this case picture comletely diferrent - fax sent but not received :) (see log)
> LOG 2
> Fax not received.
>    
> Session log follows:
> Feb 25 19:52:33.94: [16976]: SESSION BEGIN 000000051 380444955324
> Feb 25 19:52:33.94: [16976]: HylaFAX (tm) Version 4.4.4
> Feb 25 19:52:33.94: [16976]: <-- [4:ATA\r]
> Feb 25 19:52:50.58: [16976]: --> [5:+FCON]
> Feb 25 19:52:50.58: [16976]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM0'
> Feb 25 19:52:50.58: [16976]: RECV FAX: begin
> Feb 25 19:52:50.91: [16976]: --> [28:+FTSI:"         80444955320"]
> Feb 25 19:52:50.91: [16976]: REMOTE TSI "80444955320"
> Feb 25 19:52:50.91: [16976]: --> [8:+FDCS:0,]
> Feb 25 19:52:50.91: [16976]: MODEM protocol botch, can not parse "0,"
> Feb 25 19:52:50.91: [16976]: REMOTE HANGUP: COMREC error (code 72)
> Feb 25 19:52:50.92: [16976]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
> Feb 25 19:52:50.92: [16976]: REMOTE wants 9600 bit/s
> Feb 25 19:52:50.92: [16976]: REMOTE wants A4 page width (215 mm)
> Feb 25 19:52:50.92: [16976]: REMOTE wants unlimited page length
> Feb 25 19:52:50.92: [16976]: REMOTE wants 3.85 line/mm
> Feb 25 19:52:50.92: [16976]: REMOTE wants 2-D MR
> Feb 25 19:52:50.92: [16976]: --> [2:OK]
> Feb 25 19:52:50.92: [16976]: <-- [7:AT+FDR\r]
> Feb 25 19:52:54.16: [16976]: --> [5:+FCFR]
> Feb 25 19:52:54.94: [16976]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
> Feb 25 19:52:54.94: [16976]: REMOTE wants 9600 bit/s
> Feb 25 19:52:54.94: [16976]: REMOTE wants A4 page width (215 mm)
> Feb 25 19:52:54.94: [16976]: REMOTE wants unlimited page length
> Feb 25 19:52:54.94: [16976]: REMOTE wants 3.85 line/mm
> Feb 25 19:52:54.94: [16976]: REMOTE wants 2-D MR
> Feb 25 19:52:54.94: [16976]: --> [7:CONNECT]
> Feb 25 19:52:54.94: [16976]: RECV: begin page
> Feb 25 19:52:54.94: [16976]: RECV: send trigger 021
> Feb 25 19:52:54.94: [16976]: <-- data [1]
> Feb 25 19:52:54.94: [16976]: Copy quality checking performed by host
> Feb 25 19:54:15.21: [16976]: <-- data [1]
> Feb 25 19:54:15.21: [16976]: RECV: Missing EOL after 5 seconds
> Feb 25 19:54:15.21: [16976]: REMOTE HANGUP: Missing EOL after 5 seconds (section
> 3.2/T.4) (code 91)
> Feb 25 19:54:15.21: [16976]: RECV FAX (000000051): recvq/fax000000036.tif from
> 80444955320, route to <unspecified>, 0 pages in 1:25
> Feb 25 19:54:15.21: [16976]: RECV FAX: 
> Feb 25 19:54:15.21: [16976]: <-- [6:AT+FK\r]
> Feb 25 19:54:45.21: [16976]: MODEM <Timeout>
> Feb 25 19:54:45.21: [16976]: RECV FAX: bin/faxrcvd "recvq/fax000000036.tif"
> "ttyACM0" "000000051" ""
> Feb 25 19:54:45.21: [16976]: RECV FAX: end
> Feb 25 19:54:45.21: [16976]: SESSION END
>  
> Best regards,
> Konstantin
> 24.02.09, 16:45, "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>:
> LOG 1
> > voznjuk konstantin wrote:
> > > Feb 23 16:42:40.63: [16976]: SESSION BEGIN 000000048 380444955324
> > > Feb 23 16:42:40.63: [16976]: HylaFAX (tm) Version 4.4.4
> > > Feb 23 16:42:40.63: [16976]: <-- [4:ATA\r]
> > > Feb 23 16:42:47.30: [16976]: --> [7:CONNECT]
> > > Feb 23 16:42:47.30: [16976]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM0'
> > > Feb 23 16:42:47.30: [16976]: RECV FAX: begin
> > > Feb 23 16:42:47.30: [16976]: <-- data [32]
> > > Feb 23 16:42:47.30: [16976]: <-- data [2]
> > > Feb 23 16:42:48.52: [16976]: --> [7:CONNECT]
> > > Feb 23 16:42:48.52: [16976]: <-- data [23]
> > > Feb 23 16:42:48.52: [16976]: <-- data [2]
> > > Feb 23 16:42:49.52: [16976]: --> [7:CONNECT]
> > > Feb 23 16:42:49.52: [16976]: <-- data [13]
> > > Feb 23 16:42:49.52: [16976]: <-- data [2]
> > > Feb 23 16:42:50.02: [16976]: --> [2:OK]
> > > Feb 23 16:42:50.02: [16976]: <-- [9:AT+FRH=3\r]
> > > Feb 23 16:42:50.31: [16976]: --> [7:CONNECT]
> > > Feb 23 16:42:52.53: [16976]: --> [2:OK]
> > > Feb 23 16:42:52.53: [16976]: RECV recv DIS (identification signal)
> > >   
> > You have another fax machine connected to the same phone line that is 
> > answering the calls.  Turn that machine off.
> > Thanks,
> > Lee.
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> -- 
> Яндекс.Открытки. Свежие открытки у вас в почтовом ящике http://cards.yandex.ru/subscribe.xml
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

-- 
Яндекс.Почта - Проверьте почту с мобильного устройства: http://mail.ya.ru


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*