Re: [hylafax-users] US robotics and New Hylafax install

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

roger pedrol wrote:
> feb 26 12:59:17.64: [10410]: REMOTE wants 2400 bit/s
> feb 26 12:59:17.64: [10410]: REMOTE wants A4 page width (215 mm)
> feb 26 12:59:17.64: [10410]: REMOTE wants unlimited page length
> feb 26 12:59:17.64: [10410]: REMOTE wants 200 x 100 dpi
> feb 26 12:59:17.64: [10410]: REMOTE wants 2-D MMR
> feb 26 12:59:17.64: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
> feb 26 12:59:17.64: [10410]: RECV recv DCS (command signal)
> feb 26 12:59:17.64: [10410]: RECV training at v.27ter fallback mode 
> 2400 bit/s
> feb 26 12:59:17.64: [10410]: <-- [10:AT+FRM=24\r]
> feb 26 12:59:18.91: [10410]: --> [7:CONNECT]
> feb 26 12:59:20.47: [10410]: RECV: TCF 469 bytes, 11% non-zero, 416 
> zero-run
> feb 26 12:59:20.47: [10410]: RECV: reject TCF (too many non-zero, max 
> 10%)
> feb 26 12:59:20.48: [10410]: --> [10:NO CARRIER] 

It looks to me like you may have problems with your phone lines.  Either 
that or the modem is faulty.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*