HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] US robotics and New Hylafax install

Hi all,

I'm having problems receiving faxes to my new Hylafax (ubuntu 8.04). The modem is a US robotics (yes, I know is not the best option, but I have 2 in stock)

The strange thing is sometimes i receive the fax and sometimes not, and often is not completed. any ideas?

feb 26 12:58:28.05: [10410]: SESSION BEGIN 000000014 34937840867
feb 26 12:58:28.05: [10410]: HylaFAX (tm) Version 4.4.3
feb 26 12:58:28.05: [10410]: <-- [13:AT+FCLASS=1A\r]
feb 26 12:58:33.23: [10410]: --> [7:CONNECT]
feb 26 12:58:33.23: [10410]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
feb 26 12:58:33.23: [10410]: RECV FAX: begin
feb 26 12:58:33.23: [10410]: <-- data [32]
feb 26 12:58:33.23: [10410]: <-- data [2]
feb 26 12:58:33.40: [10410]: --> [7:CONNECT]
feb 26 12:58:33.40: [10410]: <-- data [23]
feb 26 12:58:33.40: [10410]: <-- data [2]
feb 26 12:58:34.12: [10410]: --> [7:CONNECT]
feb 26 12:58:34.12: [10410]: <-- data [13]
feb 26 12:58:34.12: [10410]: <-- data [2]
feb 26 12:58:36.39: [10410]: --> [2:OK]
feb 26 12:58:36.39: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:37.01: [10410]: --> [7:CONNECT]
feb 26 12:58:38.35: [10410]: --> [2:OK]
feb 26 12:58:38.35: [10410]: REMOTE TSI "935645922"
feb 26 12:58:38.35: [10410]: RECV recv TSI (sender id)
feb 26 12:58:38.35: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:38.37: [10410]: --> [7:CONNECT]
feb 26 12:58:38.69: [10410]: --> [2:OK]
feb 26 12:58:38.69: [10410]: REMOTE wants 14400 bit/s
feb 26 12:58:38.69: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:58:38.69: [10410]: REMOTE wants unlimited page length
feb 26 12:58:38.69: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:58:38.69: [10410]: REMOTE wants 2-D MMR
feb 26 12:58:38.69: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:58:38.69: [10410]: RECV recv DCS (command signal)
feb 26 12:58:38.69: [10410]: RECV training at v.17 14400 bit/s
feb 26 12:58:38.69: [10410]: <-- [11:AT+FRM=145\r]
feb 26 12:58:43.19: [10410]: --> [0:]
feb 26 12:58:43.19: [10410]: MODEM <Empty line>
feb 26 12:58:43.19: [10410]: <-- data [1]
feb 26 12:58:43.20: [10410]: --> [2:OK]
feb 26 12:58:43.20: [10410]: DELAY 70 ms
feb 26 12:58:43.27: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:58:43.31: [10410]: --> [7:CONNECT]
feb 26 12:58:43.31: [10410]: <-- data [3]
feb 26 12:58:43.31: [10410]: <-- data [2]
feb 26 12:58:44.49: [10410]: --> [2:OK]
feb 26 12:58:44.49: [10410]: TRAINING failed
feb 26 12:58:44.49: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:45.01: [10410]: --> [7:CONNECT]
feb 26 12:58:46.51: [10410]: --> [2:OK]
feb 26 12:58:46.51: [10410]: REMOTE TSI "935645922"
feb 26 12:58:46.51: [10410]: RECV recv TSI (sender id)
feb 26 12:58:46.51: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:46.53: [10410]: --> [7:CONNECT]
feb 26 12:58:46.83: [10410]: --> [2:OK]
feb 26 12:58:46.83: [10410]: REMOTE wants 12000 bit/s
feb 26 12:58:46.83: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:58:46.83: [10410]: REMOTE wants unlimited page length
feb 26 12:58:46.83: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:58:46.83: [10410]: REMOTE wants 2-D MMR
feb 26 12:58:46.83: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:58:46.83: [10410]: RECV recv DCS (command signal)
feb 26 12:58:46.83: [10410]: RECV training at v.17 12000 bit/s
feb 26 12:58:46.83: [10410]: <-- [11:AT+FRM=121\r]
feb 26 12:58:51.33: [10410]: --> [0:]
feb 26 12:58:51.33: [10410]: MODEM <Empty line>
feb 26 12:58:51.33: [10410]: <-- data [1]
feb 26 12:58:51.34: [10410]: --> [2:OK]
feb 26 12:58:51.34: [10410]: DELAY 70 ms
feb 26 12:58:51.41: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:58:51.45: [10410]: --> [7:CONNECT]
feb 26 12:58:51.45: [10410]: <-- data [3]
feb 26 12:58:51.45: [10410]: <-- data [2]
feb 26 12:58:52.62: [10410]: --> [2:OK]
feb 26 12:58:52.62: [10410]: TRAINING failed
feb 26 12:58:52.62: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:53.03: [10410]: --> [7:CONNECT]
feb 26 12:58:54.63: [10410]: --> [2:OK]
feb 26 12:58:54.63: [10410]: REMOTE TSI "935645922"
feb 26 12:58:54.63: [10410]: RECV recv TSI (sender id)
feb 26 12:58:54.63: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:58:54.65: [10410]: --> [7:CONNECT]
feb 26 12:58:54.95: [10410]: --> [2:OK]
feb 26 12:58:54.95: [10410]: REMOTE wants 9600 bit/s
feb 26 12:58:54.95: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:58:54.95: [10410]: REMOTE wants unlimited page length
feb 26 12:58:54.95: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:58:54.95: [10410]: REMOTE wants 2-D MMR
feb 26 12:58:54.95: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:58:54.95: [10410]: RECV recv DCS (command signal)
feb 26 12:58:54.95: [10410]: RECV training at v.17 9600 bit/s
feb 26 12:58:54.95: [10410]: <-- [10:AT+FRM=97\r]
feb 26 12:58:59.45: [10410]: --> [0:]
feb 26 12:58:59.45: [10410]: MODEM <Empty line>
feb 26 12:58:59.45: [10410]: <-- data [1]
feb 26 12:58:59.46: [10410]: --> [2:OK]
feb 26 12:58:59.46: [10410]: DELAY 70 ms
feb 26 12:58:59.53: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:58:59.57: [10410]: --> [7:CONNECT]
feb 26 12:58:59.57: [10410]: <-- data [3]
feb 26 12:58:59.57: [10410]: <-- data [2]
feb 26 12:59:00.74: [10410]: --> [2:OK]
feb 26 12:59:00.74: [10410]: TRAINING failed
feb 26 12:59:00.74: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:01.46: [10410]: --> [7:CONNECT]
feb 26 12:59:02.75: [10410]: --> [2:OK]
feb 26 12:59:02.75: [10410]: REMOTE TSI "935645922"
feb 26 12:59:02.75: [10410]: RECV recv TSI (sender id)
feb 26 12:59:02.75: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:02.76: [10410]: --> [7:CONNECT]
feb 26 12:59:03.09: [10410]: --> [2:OK]
feb 26 12:59:03.09: [10410]: REMOTE wants 7200 bit/s
feb 26 12:59:03.09: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:59:03.09: [10410]: REMOTE wants unlimited page length
feb 26 12:59:03.09: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:59:03.09: [10410]: REMOTE wants 2-D MMR
feb 26 12:59:03.09: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:59:03.09: [10410]: RECV recv DCS (command signal)
feb 26 12:59:03.09: [10410]: RECV training at v.17 7200 bit/s
feb 26 12:59:03.09: [10410]: <-- [10:AT+FRM=73\r]
feb 26 12:59:07.59: [10410]: --> [0:]
feb 26 12:59:07.59: [10410]: MODEM <Empty line>
feb 26 12:59:07.59: [10410]: <-- data [1]
feb 26 12:59:07.60: [10410]: --> [2:OK]
feb 26 12:59:07.60: [10410]: DELAY 70 ms
feb 26 12:59:07.67: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:59:07.71: [10410]: --> [7:CONNECT]
feb 26 12:59:07.71: [10410]: <-- data [3]
feb 26 12:59:07.71: [10410]: <-- data [2]
feb 26 12:59:08.89: [10410]: --> [2:OK]
feb 26 12:59:08.89: [10410]: TRAINING failed
feb 26 12:59:08.89: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:09.46: [10410]: --> [7:CONNECT]
feb 26 12:59:10.89: [10410]: --> [2:OK]
feb 26 12:59:10.89: [10410]: REMOTE TSI "935645922"
feb 26 12:59:10.89: [10410]: RECV recv TSI (sender id)
feb 26 12:59:10.89: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:10.90: [10410]: --> [7:CONNECT]
feb 26 12:59:11.23: [10410]: --> [2:OK]
feb 26 12:59:11.23: [10410]: REMOTE wants 4800 bit/s
feb 26 12:59:11.23: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:59:11.23: [10410]: REMOTE wants unlimited page length
feb 26 12:59:11.23: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:59:11.23: [10410]: REMOTE wants 2-D MMR
feb 26 12:59:11.23: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:59:11.23: [10410]: RECV recv DCS (command signal)
feb 26 12:59:11.23: [10410]: RECV training at v.27ter 4800 bit/s
feb 26 12:59:11.23: [10410]: <-- [10:AT+FRM=48\r]
feb 26 12:59:12.27: [10410]: --> [7:CONNECT]
feb 26 12:59:13.83: [10410]: RECV: TCF 940 bytes, 71% non-zero, 14 zero-run
feb 26 12:59:13.83: [10410]: RECV: reject TCF (too many non-zero, max 10%)
feb 26 12:59:13.83: [10410]: RECV: reject TCF (zero run too short, min 600)
feb 26 12:59:13.84: [10410]: --> [10:NO CARRIER]
feb 26 12:59:13.84: [10410]: DELAY 70 ms
feb 26 12:59:13.91: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:59:14.11: [10410]: --> [7:CONNECT]
feb 26 12:59:14.11: [10410]: <-- data [3]
feb 26 12:59:14.11: [10410]: <-- data [2]
feb 26 12:59:15.29: [10410]: --> [2:OK]
feb 26 12:59:15.29: [10410]: TRAINING failed
feb 26 12:59:15.29: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:15.86: [10410]: --> [7:CONNECT]
feb 26 12:59:17.29: [10410]: --> [2:OK]
feb 26 12:59:17.29: [10410]: REMOTE TSI "935645922"
feb 26 12:59:17.29: [10410]: RECV recv TSI (sender id)
feb 26 12:59:17.29: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:17.31: [10410]: --> [7:CONNECT]
feb 26 12:59:17.64: [10410]: --> [2:OK]
feb 26 12:59:17.64: [10410]: REMOTE wants 2400 bit/s
feb 26 12:59:17.64: [10410]: REMOTE wants A4 page width (215 mm)
feb 26 12:59:17.64: [10410]: REMOTE wants unlimited page length
feb 26 12:59:17.64: [10410]: REMOTE wants 200 x 100 dpi
feb 26 12:59:17.64: [10410]: REMOTE wants 2-D MMR
feb 26 12:59:17.64: [10410]: REMOTE wants T.30 Annex A, 256-byte ECM
feb 26 12:59:17.64: [10410]: RECV recv DCS (command signal)
feb 26 12:59:17.64: [10410]: RECV training at v.27ter fallback mode 2400 bit/s
feb 26 12:59:17.64: [10410]: <-- [10:AT+FRM=24\r]
feb 26 12:59:18.91: [10410]: --> [7:CONNECT]
feb 26 12:59:20.47: [10410]: RECV: TCF 469 bytes, 11% non-zero, 416 zero-run
feb 26 12:59:20.47: [10410]: RECV: reject TCF (too many non-zero, max 10%)
feb 26 12:59:20.48: [10410]: --> [10:NO CARRIER]
feb 26 12:59:20.48: [10410]: DELAY 70 ms
feb 26 12:59:20.55: [10410]: <-- [9:AT+FTH=3\r]
feb 26 12:59:20.75: [10410]: --> [7:CONNECT]
feb 26 12:59:20.75: [10410]: <-- data [3]
feb 26 12:59:20.75: [10410]: <-- data [2]
feb 26 12:59:21.92: [10410]: --> [2:OK]
feb 26 12:59:21.92: [10410]: TRAINING failed
feb 26 12:59:21.92: [10410]: <-- [9:AT+FRH=3\r]
feb 26 12:59:22.61: [10410]: --> [7:CONNECT]
feb 26 12:59:23.38: [10410]: --> [2:OK]
feb 26 12:59:23.38: [10410]: RECV recv DCN (disconnect)
feb 26 12:59:23.38: [10410]: RECV FAX: RSPREC error/got DCN (sender abort)
feb 26 12:59:23.38: [10410]: RECV FAX: end
feb 26 12:59:23.38: [10410]: RSPREC error/got DCN (sender abort)
feb 26 12:59:23.38: [10410]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions