[hylafax-users] Failed to detect high-speed data carrier

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Failed to detect high-speed data carrier
From: Ismail OZATAY <ismail@xxxxxxxxxxxxxxxx>
Date: Wed, 04 Feb 2009 14:08:01 +0200

Hi all ,

Today i get an receive error and here is the error log. I have searched archive find similar error but can not find anything to fix. I use hylafax 4.4.4-1 on Centos5 with Hayes Accura external fax modems. Any idea ?

ailed to properly detect high-speed data carrier.

Session log follows:
Feb 04 13:44:19.95: [ 2069]: SESSION BEGIN 000000130 903124414563
Feb 04 13:44:19.95: [ 2069]: HylaFAX (tm) Version 4.4.4
Feb 04 13:44:19.95: [ 2069]: <-- [4:ATA\r]
Feb 04 13:44:29.67: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:29.67: [ 2069]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS2'
Feb 04 13:44:29.67: [ 2069]: RECV FAX: begin
Feb 04 13:44:29.67: [ 2069]: <-- data [32]
Feb 04 13:44:29.67: [ 2069]: <-- data [2]
Feb 04 13:44:29.70: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:29.70: [ 2069]: <-- data [23]
Feb 04 13:44:29.70: [ 2069]: <-- data [2]
Feb 04 13:44:29.73: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:29.73: [ 2069]: <-- data [13]
Feb 04 13:44:29.73: [ 2069]: <-- data [2]
Feb 04 13:44:31.93: [ 2069]: --> [2:OK]
Feb 04 13:44:31.93: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:38.93: [ 2069]: --> [0:]
Feb 04 13:44:38.93: [ 2069]: MODEM <Empty line>
Feb 04 13:44:38.93: [ 2069]: <-- data [1]
Feb 04 13:44:38.94: [ 2069]: --> [2:]
Feb 04 13:44:38.94: [ 2069]: --> [2:OK]
Feb 04 13:44:38.94: [ 2069]: <-- [9:AT+FRS=7\r]
Feb 04 13:44:39.02: [ 2069]: --> [2:OK]
Feb 04 13:44:39.02: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:44:39.89: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:39.89: [ 2069]: <-- data [32]
Feb 04 13:44:39.89: [ 2069]: <-- data [2]
Feb 04 13:44:39.92: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:39.92: [ 2069]: <-- data [23]
Feb 04 13:44:39.92: [ 2069]: <-- data [2]
Feb 04 13:44:39.94: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:39.94: [ 2069]: <-- data [13]
Feb 04 13:44:39.94: [ 2069]: <-- data [2]
Feb 04 13:44:42.15: [ 2069]: --> [2:OK]
Feb 04 13:44:42.15: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:44.11: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:45.85: [ 2069]: --> [2:OK]
Feb 04 13:44:45.85: [ 2069]: REMOTE TSI "985966466"
Feb 04 13:44:45.85: [ 2069]: RECV recv TSI (sender id)
Feb 04 13:44:45.85: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:45.87: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:46.47: [ 2069]: --> [2:OK]
Feb 04 13:44:46.47: [ 2069]: REMOTE wants 9600 bit/s
Feb 04 13:44:46.47: [ 2069]: REMOTE wants A4 page width (215 mm)
Feb 04 13:44:46.47: [ 2069]: REMOTE wants unlimited page length
Feb 04 13:44:46.47: [ 2069]: REMOTE wants 3.85 line/mm
Feb 04 13:44:46.47: [ 2069]: REMOTE wants 2-D MMR
Feb 04 13:44:46.47: [ 2069]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 04 13:44:46.47: [ 2069]: RECV recv DCS (command signal)
Feb 04 13:44:46.47: [ 2069]: RECV training at v.29 9600 bit/s
Feb 04 13:44:46.47: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:44:47.16: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:48.36: [ 2069]: RECV: TCF 1424 bytes, 0% non-zero, 1418 zero-run
Feb 04 13:44:48.36: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:44:48.36: [ 2069]: <-- [9:AT+FRS=7\r]
Feb 04 13:44:48.44: [ 2069]: --> [2:OK]
Feb 04 13:44:48.44: [ 2069]: TRAINING succeeded
Feb 04 13:44:48.45: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:44:49.32: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:49.32: [ 2069]: <-- data [3]
Feb 04 13:44:49.32: [ 2069]: <-- data [2]
Feb 04 13:44:49.64: [ 2069]: --> [2:OK]
Feb 04 13:44:49.64: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:44:52.41: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:53.05: [ 2069]: RECV assumed RCP frame with block end
Feb 04 13:44:53.05: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:44:53.05: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:53.20: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:54.94: [ 2069]: --> [2:OK]
Feb 04 13:44:54.94: [ 2069]: RECV recv TSI (sender id)
Feb 04 13:44:54.94: [ 2069]: REMOTE TSI "985966466"
Feb 04 13:44:54.94: [ 2069]: RECV recv TSI (sender id)
Feb 04 13:44:54.94: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:54.95: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:55.32: [ 2069]: --> [2:OK]
Feb 04 13:44:55.32: [ 2069]: REMOTE wants 9600 bit/s
Feb 04 13:44:55.32: [ 2069]: REMOTE wants A4 page width (215 mm)
Feb 04 13:44:55.32: [ 2069]: REMOTE wants unlimited page length
Feb 04 13:44:55.32: [ 2069]: REMOTE wants 3.85 line/mm
Feb 04 13:44:55.32: [ 2069]: REMOTE wants 2-D MMR
Feb 04 13:44:55.32: [ 2069]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 04 13:44:55.32: [ 2069]: RECV recv DCS (command signal)
Feb 04 13:44:55.32: [ 2069]: RECV training at v.29 9600 bit/s
Feb 04 13:44:55.32: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:44:55.49: [ 2069]: --> [8:+FCERROR]
Feb 04 13:44:55.49: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:44:56.01: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:56.01: [ 2069]: RECV: TCF 0 bytes, 0% non-zero, 0 zero-run
Feb 04 13:44:56.01: [ 2069]: RECV: reject TCF (zero run too short, min 1200)
Feb 04 13:44:56.01: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:44:56.02: [ 2069]: <-- [9:AT+FRS=7\r]
Feb 04 13:44:56.10: [ 2069]: --> [2:OK]
Feb 04 13:44:56.10: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:44:56.96: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:56.97: [ 2069]: <-- data [3]
Feb 04 13:44:56.97: [ 2069]: <-- data [2]
Feb 04 13:44:57.29: [ 2069]: --> [2:OK]
Feb 04 13:44:57.29: [ 2069]: TRAINING failed
Feb 04 13:44:57.29: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:44:57.36: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:58.22: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:44:58.22: [ 2069]: MODEM No carrier
Feb 04 13:44:58.22: [ 2069]: <-- [10:AT+FRS=21\r]
Feb 04 13:44:58.44: [ 2069]: --> [2:OK]
Feb 04 13:44:58.44: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:44:59.31: [ 2069]: --> [7:CONNECT]
Feb 04 13:44:59.31: [ 2069]: <-- data [3]
Feb 04 13:44:59.31: [ 2069]: <-- data [2]
Feb 04 13:44:59.63: [ 2069]: --> [2:OK]
Feb 04 13:44:59.63: [ 2069]: RECV send CRP (command repeat)
Feb 04 13:44:59.63: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:45:01.31: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:03.05: [ 2069]: --> [2:OK]
Feb 04 13:45:03.05: [ 2069]: REMOTE TSI "985966466"
Feb 04 13:45:03.05: [ 2069]: RECV recv TSI (sender id)
Feb 04 13:45:03.05: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:45:03.07: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:03.67: [ 2069]: --> [2:OK]
Feb 04 13:45:03.67: [ 2069]: REMOTE wants 9600 bit/s
Feb 04 13:45:03.67: [ 2069]: REMOTE wants A4 page width (215 mm)
Feb 04 13:45:03.67: [ 2069]: REMOTE wants unlimited page length
Feb 04 13:45:03.67: [ 2069]: REMOTE wants 3.85 line/mm
Feb 04 13:45:03.67: [ 2069]: REMOTE wants 2-D MMR
Feb 04 13:45:03.67: [ 2069]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 04 13:45:03.67: [ 2069]: RECV recv DCS (command signal)
Feb 04 13:45:03.67: [ 2069]: RECV training at v.29 9600 bit/s
Feb 04 13:45:03.67: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:45:03.83: [ 2069]: --> [8:+FCERROR]
Feb 04 13:45:03.83: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:45:04.37: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:04.37: [ 2069]: RECV: TCF 0 bytes, 0% non-zero, 0 zero-run
Feb 04 13:45:04.37: [ 2069]: RECV: reject TCF (zero run too short, min 1200)
Feb 04 13:45:04.38: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:45:04.38: [ 2069]: <-- [9:AT+FRS=7\r]
Feb 04 13:45:04.46: [ 2069]: --> [2:OK]
Feb 04 13:45:04.46: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:45:05.33: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:05.33: [ 2069]: <-- data [3]
Feb 04 13:45:05.33: [ 2069]: <-- data [2]
Feb 04 13:45:05.65: [ 2069]: --> [2:OK]
Feb 04 13:45:05.65: [ 2069]: TRAINING failed
Feb 04 13:45:05.65: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:45:05.73: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:14.90: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:45:14.90: [ 2069]: MODEM No carrier
Feb 04 13:45:14.90: [ 2069]: <-- [10:AT+FRS=21\r]
Feb 04 13:45:15.13: [ 2069]: --> [2:OK]
Feb 04 13:45:15.13: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:45:16.00: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:16.00: [ 2069]: <-- data [3]
Feb 04 13:45:16.00: [ 2069]: <-- data [2]
Feb 04 13:45:16.32: [ 2069]: --> [2:OK]
Feb 04 13:45:16.32: [ 2069]: RECV send CRP (command repeat)
Feb 04 13:45:16.32: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:45:23.32: [ 2069]: --> [0:]
Feb 04 13:45:23.32: [ 2069]: MODEM <Empty line>
Feb 04 13:45:23.32: [ 2069]: <-- data [1]
Feb 04 13:45:23.33: [ 2069]: --> [2:]
Feb 04 13:45:23.33: [ 2069]: --> [2:OK]
Feb 04 13:45:23.33: [ 2069]: <-- [10:AT+FRM=96\r]
Feb 04 13:45:30.33: [ 2069]: <-- data [1]
Feb 04 13:45:30.34: [ 2069]: --> [2:]
Feb 04 13:45:30.34: [ 2069]: --> [2:OK]
Feb 04 13:45:30.34: [ 2069]: <-- [9:AT+FRH=3\r]
Feb 04 13:45:40.36: [ 2069]: --> [10:NO CARRIER]
Feb 04 13:45:40.36: [ 2069]: MODEM No carrier
Feb 04 13:45:40.36: [ 2069]: RECV FAX: Failed to properly detect high-speed data carrier.
Feb 04 13:45:40.36: [ 2069]: <-- [9:AT+FTH=3\r]
Feb 04 13:45:40.36: [ 2069]: RECV FAX (000000130): recvq/fax000000072.tif from 985966466, route to <unspecified>, 0 pages in 1:11
Feb 04 13:45:41.23: [ 2069]: --> [7:CONNECT]
Feb 04 13:45:41.23: [ 2069]: <-- data [3]
Feb 04 13:45:41.23: [ 2069]: <-- data [2]
Feb 04 13:45:41.55: [ 2069]: --> [2:OK]
Feb 04 13:45:41.55: [ 2069]: RECV FAX (000000130): session with 985966466 terminated abnormally: Failed to properly detect high-speed data carrier.
Feb 04 13:45:41.55: [ 2069]: RECV FAX: bin/faxrcvd "recvq/fax000000072.tif" "ttyS2" "000000130" "Failed to properly detect high-speed data carrier."
Feb 04 13:45:41.55: [ 2069]: RECV FAX: end
Feb 04 13:45:41.55: [ 2069]: Failed to properly detect high-speed data carrier.

Regards

ismail
Feb 04 13:45:41.55: [ 2069]: SESSION END

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] Failed to detect high-speed data carrier
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] How to perform mail-merge for a postscript document to fax?
Next by Date: [hylafax-users] Repeatedly getting "Can not lock modem device" message.
Previous by thread: Re: [hylafax-users] not able 2 send fax through hylafax server
Next by thread: Re: [hylafax-users] Failed to detect high-speed data carrier
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions