Re: [hylafax-users] Can't Cancel Fax Job

[John Miller <jarthurmiller@xxxxxxxxx>]

Thank you Holger. I will give this a try when I get home tonight.

 

John

---

From: Holger Bruenjes <holgerbruenjes@xxxxxxx>
To: John Miller <jarthurmiller@xxxxxxxxx>; hylafax-users@xxxxxxxxxxx
Sent: Tuesday, January 27, 2009 3:31:26 PM
Subject: Re: [hylafax-users] Can't Cancel Fax Job

Hello John

The Modem driver license is bundled to the Modem. You can install the Modem source twice and enter your license Number. That shall work.

please look at 'hsfconfig --info' to see your license information


Do the faxaddmodem ttySHSF0 twice, or do 'probemodem ttySHSF0' after activation the Modem dricver license, first, to see the output from your Modem.

eistre:/ # probemodem ttySHSF0

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 and 1.0 modem.

ATI0    RESULT = "OK"  RESPONSE = "56000"
ATI1    RESULT = "OK"  RESPONSE = "255"
ATI2    RESULT = "OK"  RESPONSE = "OK"
ATI3    RESULT = "OK"  RESPONSE = "hsfmodem-7.68.00.13full"
ATI4    RESULT = "OK"  RESPONSE = "Conexant HSF softmodem"
ATI5    RESULT = "OK"  RESPONSE = "68"
ATI6    RESULT = "OK"  RESPONSE = "OK"
[...]

Holger


Am 2009-01-27 22:01, schrieb John Miller:
> Holger, I did buy a driver license from Linuxant and inserted it in the driver setup script. HylaFAX recognized the modem before I had to blow away my operating system and reinstall the Linuxant driver. Surely I don't need to buy another license!?!!???
>
> Thanks, John
>
>
>
>
> ________________________________
> From: Holger Bruenjes <holgerbruenjes@xxxxxxx>
> To: hylafax-users@xxxxxxxxxxx
> Sent: Sunday, January 25, 2009 3:46:18 AM
> Subject: Re: [hylafax-users] Can't Cancel Fax Job
>
> Hello
>
> Am 2009-01-24 19:16, schrieb John Miller:
>> You do not appear to have any modems configured for use.  Modems are
>> configured for use with HylaFAX with the faxaddmodem(8) command.
>> Do you want to run faxaddmodem to configure a modem [yes]? Serial port that modem is connected to [ttyS0]? ttySHSF0[Note: this is the address reported by the Linuxant driver software]
>
> Yes, you must buy a 'Modem driver license' from Linuxant
>
> https://www.linuxant.com/store/
>
> Holger
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxx.*