[hylafax-users] Failed to properly detect high-speed data carrier. {E112}

[Daren Russell <darenr@xxxxxxxxxxxxxxxxx>]

Hi,

We're running Hylafax 5.2.7 on FreeBSD 7, and had a failed incoming fax
today.  This is the first time we have come across this error:

An attempt to receive facsimile on cuad0 failed because:

The full document was not received because:

    Failed to properly detect high-speed data carrier. {E112}

I have attached the log if it means anything to anybody, and if it is
something we can do anything about.

The faxrcvd script (faxrcvd-ksm) has only a couple of small
modifications, which basically echo's a couple of statements to a text
file (it is to be modified further in the future).  We generally have no
problems with faxes coming in or going out with this setup.

Thanks
Daren

Dec 08 16:08:38.19: [96336]: SESSION BEGIN 000012238 +44115922****
Dec 08 16:08:38.19: [96336]: HylaFAX (tm) Version 5.2.7
Dec 08 16:08:38.19: [96336]: <-- [4:ATA\r]
Dec 08 16:08:44.23: [96336]: --> [7:CONNECT]
Dec 08 16:08:44.23: [96336]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuad0'
Dec 08 16:08:44.23: [96336]: RECV FAX: begin
Dec 08 16:08:46.26: [96336]: --> [7:CONNECT]
Dec 08 16:08:47.09: [96336]: --> [7:CONNECT]
Dec 08 16:08:47.74: [96336]: --> [2:OK]
Dec 08 16:08:47.74: [96336]: <-- [9:AT+FRH=3\r]
Dec 08 16:08:48.22: [96336]: --> [7:CONNECT]
Dec 08 16:08:49.64: [96336]: --> [2:OK]
Dec 08 16:08:49.64: [96336]: RECV recv TSI (sender id)
Dec 08 16:08:49.64: [96336]: REMOTE TSI "***********"
Dec 08 16:08:49.64: [96336]: <-- [9:AT+FRH=3\r]
Dec 08 16:08:49.66: [96336]: --> [7:CONNECT]
Dec 08 16:08:49.98: [96336]: --> [2:OK]
Dec 08 16:08:49.98: [96336]: RECV recv DCS (command signal)
Dec 08 16:08:49.98: [96336]: REMOTE wants 9600 bit/s
Dec 08 16:08:49.98: [96336]: REMOTE wants A4 page width (215 mm)
Dec 08 16:08:49.98: [96336]: REMOTE wants unlimited page length
Dec 08 16:08:49.98: [96336]: REMOTE wants 3.85 line/mm
Dec 08 16:08:49.98: [96336]: REMOTE wants 1-D MH
Dec 08 16:08:49.98: [96336]: REMOTE wants T.30 Annex A, 256-byte ECM
Dec 08 16:08:49.98: [96336]: RECV training at v.29 9600 bit/s
Dec 08 16:08:49.98: [96336]: <-- [10:AT+FRM=96\r]
Dec 08 16:08:50.31: [96336]: --> [7:CONNECT]
Dec 08 16:08:51.88: [96336]: RECV: TCF 1864 bytes, 2% non-zero, 1816 zero-run
Dec 08 16:08:51.89: [96336]: --> [10:NO CARRIER]
Dec 08 16:08:51.89: [96336]: <-- [9:AT+FRS=7\r]
Dec 08 16:08:52.02: [96336]: --> [2:OK]
Dec 08 16:08:52.02: [96336]: TRAINING succeeded
Dec 08 16:08:52.02: [96336]: <-- [9:AT+FTH=3\r]
Dec 08 16:08:52.07: [96336]: --> [7:CONNECT]
Dec 08 16:08:53.38: [96336]: --> [2:OK]
Dec 08 16:08:53.38: [96336]: <-- [10:AT+FRM=96\r]
Dec 08 16:08:55.63: [96336]: --> [8:+FCERROR]
Dec 08 16:08:55.63: [96336]: <-- [10:AT+FRM=96\r]
Dec 08 16:08:55.92: [96336]: --> [8:+FCERROR]
Dec 08 16:08:55.92: [96336]: <-- [9:AT+FRH=3\r]
Dec 08 16:08:56.31: [96336]: --> [7:CONNECT]
Dec 08 16:08:57.14: [96336]: --> [2:OK]
Dec 08 16:08:57.14: [96336]: RECV recv TSI (sender id)
Dec 08 16:08:57.14: [96336]: RECV recv TSI (sender id)
Dec 08 16:08:57.14: [96336]: REMOTE TSI "***********"
Dec 08 16:08:57.14: [96336]: <-- [9:AT+FRH=3\r]
Dec 08 16:08:57.16: [96336]: --> [7:CONNECT]
Dec 08 16:08:57.49: [96336]: --> [2:OK]
Dec 08 16:08:57.49: [96336]: RECV recv DCS (command signal)
Dec 08 16:08:57.49: [96336]: REMOTE wants 9600 bit/s
Dec 08 16:08:57.49: [96336]: REMOTE wants A4 page width (215 mm)
Dec 08 16:08:57.49: [96336]: REMOTE wants unlimited page length
Dec 08 16:08:57.49: [96336]: REMOTE wants 3.85 line/mm
Dec 08 16:08:57.49: [96336]: REMOTE wants 1-D MH
Dec 08 16:08:57.49: [96336]: REMOTE wants T.30 Annex A, 256-byte ECM
Dec 08 16:08:57.49: [96336]: RECV training at v.29 9600 bit/s
Dec 08 16:08:57.49: [96336]: <-- [10:AT+FRM=96\r]
Dec 08 16:08:57.81: [96336]: --> [7:CONNECT]
Dec 08 16:08:59.38: [96336]: RECV: TCF 1864 bytes, 2% non-zero, 1816 zero-run
Dec 08 16:08:59.39: [96336]: --> [10:NO CARRIER]
Dec 08 16:08:59.39: [96336]: <-- [9:AT+FRS=7\r]
Dec 08 16:08:59.52: [96336]: --> [2:OK]
Dec 08 16:08:59.52: [96336]: TRAINING succeeded
Dec 08 16:08:59.52: [96336]: <-- [9:AT+FTH=3\r]
Dec 08 16:08:59.57: [96336]: --> [7:CONNECT]
Dec 08 16:09:00.88: [96336]: --> [2:OK]
Dec 08 16:09:00.88: [96336]: <-- [10:AT+FRM=96\r]
Dec 08 16:09:10.80: [96336]: --> [2:OK]
Dec 08 16:09:10.80: [96336]: <-- [9:AT+FRH=3\r]
Dec 08 16:10:11.81: [96336]: --> [10:NO CARRIER]
Dec 08 16:10:11.81: [96336]: MODEM No carrier
Dec 08 16:10:11.81: [96336]: RECV FAX: Failed to properly detect high-speed data carrier. {E112}
Dec 08 16:10:11.81: [96336]: <-- [9:AT+FRS=7\r]
Dec 08 16:10:11.81: [96336]: RECV FAX (000012238): recvq/fax000005339.tif from ***********, subaddress <unspecified>, 0 pages in 0:01:27
Dec 08 16:10:11.93: [96336]: --> [2:OK]
Dec 08 16:10:11.93: [96336]: <-- [9:AT+FTH=3\r]
Dec 08 16:10:11.98: [96336]: --> [7:CONNECT]
Dec 08 16:10:13.29: [96336]: --> [2:OK]
Dec 08 16:10:13.29: [96336]: RECV FAX (000012238): session with *********** terminated abnormally: Failed to properly detect high-speed data carrier. {E112}
Dec 08 16:10:13.29: [96336]: RECV FAX: etc/faxrcvd-ksm 'recvq/fax000005339.tif' 'cuad0' '000012238' 'Failed to properly detect high-speed data carrier. {E112}'
Dec 08 16:10:13.29: [96336]: RECV FAX: end
Dec 08 16:10:13.29: [96336]: SESSION END