Re: [hylafax-users] Best Practices: Dialogic Diva 4BRI-8 PCI v2

["Dominique dHotman" <dhotman@xxxxxxxxx>]

Hello Tobias,

I can recommend the Dialogic drivers.  We are running a 30 channel PRI diva server board with HylaFAX using the TTY interface and it works really well.

There are also some really nice features that are bundled with the driver like usage reporting and that type of thing.  I've found the  Dialogic support excellent too which is really a load off.

Only thing that I had some trouble with was when we were running the with a Class 1 configuration we had a fairly high failure rate (something like 10 - 15%) but switching to Class 2 basically sorted that out. 

Good luck

Dominique

On Fri, Nov 21, 2008 at 1:07 PM, Tobias Bartel <tbartel@xxxxxxxxxx> wrote:

Hello Oliver,

thx for your reply. Last night i did play with the melware drivers and
couldn't make the TTYs work so i am defnitly going to give the Dialogic
drivers a spin.

Getting my hands on the yet to be released drivers would be nice as
well ;) feel free to send me any link you want ;)

thx in advance - tobi



Am Donnerstag, den 20.11.2008, 20:10 +0000 schrieb Oliver Söder:

> Hello Tobias,
>
> I am working for Dialogic, doing support for Diva there.
> Use the official driver (if you want I can give you a link for our newest
> version 9 which will be released in the next weeks).
> Our driver contains melware software for long time, but will you give a lot
> of additional features.
>
> Hylafax does not support CAPI, so we added some nice TTY interfaces in our
> driver, so that folks with Hylafax can use it.
>
> If you go to www.dialogic.com and enter Hylafax in the top right hand search
> window (Suchfenster, ich red nur wegen den anderen nicht deutsch  :)  then you
> will find some configuration help for the Hylafax TTYs if you use them
> together with Diva boards.
>
> I hope this answered your question?
>
> Oliver
>
>
> Tobias Bartel schrieb:
> > Hallo,
> >
> > I am about to setup a new HylaFAX Server with a Diva card at its core.
> > I did my research and now i am a bit confused ;)
> >
> > Should i use the offical drivers or the drivers availabel at
> > melware.org?
> >
> > Should I use CAPI or the ttyI* devices?
> >
> > My gut tells me to use latests melware.org drivers and the ttyI*
> > devices. In the past i never had any luck doing anything with CAPI.
> >
> > So what is the way to go? What will caus less headaches in the longterm?
> >
> > ... and is there a simple copy'n past howto for Debian that i just
> > could not find?
> >
> > thx in advance - tobi


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*