Re: [hylafax-users] What command can I use to display runningservice.

["Ramon F. McDougall" <rfm@xxxxxxxxxxxxxxxxxx>]

Ok, I tried the command and faxq and hfaxd both start. HylaFAX documentation

States that is the server program that listens for incoming phone call and
either handles each call directly or hands it off to an appropriate program.

Faxgetty is started by init(8C) is that the same as init.d?


Thanks

Ramon
-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Dennis M. Linton,
P.Eng.
Sent: Tuesday, November 18, 2008 5:00 PM
To: Ramon F. McDougall
Cc: 'Jean-Pierre Radley'; 'Hylafax Users'
Subject: Re: [hylafax-users] What command can I use to display
runningservice.

Ramon, everything that should start with Hylafax gets started with:

$ sudo /etc/init.d/hylafax restart
or
# /etc/init.d/hylafax restart

unless you are rebooting in which case it all should start with the boot 
process.

I seem to recall having seen somewhere that there should NOT be an 
inittab entry for anything to do with Hylafax.  There is nothing 
whatsoever in my /etc/inittab and all seems to work well.  I am using 
Ubuntu 8.04 Desktop in case it makes a difference.

Best regards,
    Dennis

Ramon F. McDougall wrote:
> Thanks, ps -A displays services; I see 
>
> 9552 faxq
> 9556 hfaxd
> 1980 tty4 mingetty
> 1981 tty5 mingetty
> 1982 tty2 mingetty
> 1983 tty2 mingetty
> 1986 tty1 mingetty
> 1988 tty6 mingetty
>
> How can I start faxgetty?
>
> Thanks again,
>
> Ramon	
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Jean-Pierre Radley
> Sent: Tuesday, November 18, 2008 2:57 PM
> To: Hylafax Users
> Subject: Re: [hylafax-users] What command can I use to display
> runningservice.
>
> Ramon F. McDougall typed (on Tue, Nov 18, 2008 at 02:33:49PM -0500):
> | 
> | Is netstat -a the command that is used to display all running services?
I
> do
> | a netstat -a or netstat -atup
> | 
> | and I still don't see my faxgetty service running.
>
>
> No.  You want the 'ps' command.
> Its options are highly variable among different operating systems, so
> consult your manual page.
>
>   


-- 
Dennis M. Linton, P.Eng.
Cell:705.312.1336


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*