Re: [hylafax-users] Mainpine Q-Express - Waiting for modem to come ready

["Weismueller, Jonas" <jonas.weismueller@xxxxxxxxxxxx>]

Lee Howard wrote:
> Weismueller, Jonas wrote:
> > Lee Howard wrote:
> > > Okay, so that's good.  Now what does 'faxaddmodem ttyS4' do for you?
> > It went through all steps smoothly without any interruptions. I used 
> > the default value for every prompt and the following configuration 
> > file was generated:
> >
> > CountryCode:            41                     
> > AreaCode:               022                    
> > FAXNumber:              +1.999.555.1212        
> > LongDistancePrefix:     1                      
> > InternationalPrefix:    011                    
> > DialStringRules:        etc/dialrules          
> > ServerTracing:          1                      
> > SessionTracing:         0xFFF                  
> > RecvFileMode:           0600                   
> > LogFileMode:            0600                   
> > DeviceMode:             0600                   
> > RingsBeforeAnswer:      1                      
> > SpeakerVolume:          off                    
> > GettyArgs:              "-h %l dx_%s"          
> > LocalIdentifier:        "NothingSetup"         
> > TagLineFont:            etc/lutRS18.pcf        
> > TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> > MaxRecvPages:           25                           
> > ModemType:              Class1          # use this to supply a hint 
> > Class1Cmd:              AT+FCLASS=1.0   # command to enter class 1.0
> > Class1PPMWaitCmd:       AT+FTS=7        # command to stop and wait 
> > before PPM
> > Class1TCFWaitCmd:       AT+FTS=7        # command to stop and wait 
> > before TCF
> > Class1EOPWaitCmd:       AT+FTS=9        # command to stop and wait 
> > before EOP
> > Class1SwitchingCmd:     AT+FRS=7        # command to stop and listen 
> > for silence
> > Class1RecvAbortOK:      200             # wait 200ms for abort response
> > Class1FrameOverhead:    4               # 4 byte overhead in recvd 
> > HDLC frames
> > Class1RecvIdentTimer:   40000           # 35+5secs waiting for ident 
> > frames
> > Class1TCFMaxNonZero:    10              # max 10% of data may be 
> > non-zero
> > Class1TCFMinRun:        1000            # min run is 2/3rds of TCF 
> > duration
> > ModemReadyState: R # via web admin 2008-10-13T12:00:48+0000 
>
> You seem to be using a version of HylaFAX that does not have default 
> prototype support for the IQ Express.  Please use the attached config 
> file (from HylaFAX+) for your modems.
>
> Thanks,
>
> Lee.
We currently use hylafax-5.2.5-1.fc8. Are there any known major bugs in 
this version, which would result in upgrading to 5.2.7?

Cheers Jonas

--
---------------------------------------------------------------------------
Jonas Weismueller                       Phone: +49 721 9497-163
COMSOFT GmbH                            Fax:   +49 721 9497-129
Wachhausstrasse 5a                      http://www.comsoft.aero
76227 Karlsruhe, Germany                mailto:jonas.weismueller@xxxxxxxxxxxx

Geschäftsführer: Manfred Jlg,  Manfred Schmid
Sitz der Gesellschaft: Karlsruhe,  Handelsregister: Mannheim HRB 102488

	Help save paper - do you really need to print this e-mail?

--- Disclaimer ---
This mail contains private or confidential information for the eyes of the addressee(s) named within this mail only. 
Any distribution or usage, in whole or in part, is strictly prohibited. 
If the context of this message indicates that you may have received this mail by error, please immediately contact and notify 
the sender and delete this mail from your computers as well as from your mail server. Thank you!

---------------------------------------------------------------------------


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*