HylaFAX The world's most advanced open source fax server |
Hello.
Does HylaFAX (tm) Version 4.4.3 from
hylafax.org support
DTMF detection and play back of raw
files to prompt for DTMF?
Also my modem, Intel 537EP, always
picks up after 5 rings even though I specify 2 rings.
I have the following in my
config.modem file:
RingsBeforeAnswer: 2
ModemRingsBeforeResponse:
2
#ModemRingResponse: "AT+FCLASS=8;H1\nAT+VSM=131\nAT+VLS=1\nAT+VTX\n<waitfor:CONNECT><play:2><waitfor:OK>AT+VTS=[933,,150]" ModemRingResponse: "AT+FCLASS=8;H1\nAT+VSM=131\nAT+VLS=1\nAT+VTX\n<waitfor:CONNECT><waitfor:OK>AT+VTS=[933,,150]" CallIDPattern: SHIELDED_DTMF CallIDAnswerLength: 4 ModemAnswerCmd: "<delay:100>AT+FCLASS=1;A" #ModemResetCmds: AT+VCID=1 I've omitted the audio play back for
now, but I'd like to get it to work
because I don't really know when
exactly I am supposed to enter the DTMF tones.
Can someone guide me
here?
I enter lots of digits during the
transmission but I do not see any evidence of DTMF detection.
In my log file I see:
Oct 09 20:49:18.86: [19415]: SESSION
BEGIN 000000029 16505551212
Oct 09 20:49:18.86: [19415]: HylaFAX (tm) Version 4.4.3 Oct 09 20:49:18.86: [19415]: CallID: " " Oct 09 20:49:18.86: [19415]: DELAY 1000 ms Oct 09 20:49:19.86: [19415]: <-- [14:AT+FCLASS=1;A\r] Oct 09 20:49:25.66: [19415]: --> [7:CONNECT] Oct 09 20:49:25.66: [19415]: ANSWER: FAX CONNECTION DEVICE '/dev/modem' Oct 09 20:49:25.66: [19415]: RECV FAX: begin Oct 09 20:49:25.66: [19415]: <-- data [32] Oct 09 20:49:25.66: [19415]: <-- data [2] Oct 09 20:49:26.70: [19415]: --> [7:CONNECT] Oct 09 20:49:26.70: [19415]: <-- data [23] Oct 09 20:49:26.70: [19415]: <-- data [2] Oct 09 20:49:28.34: [19415]: --> [7:CONNECT] Oct 09 20:49:28.34: [19415]: <-- data [13] Oct 09 20:49:28.34: [19415]: <-- data [2] Oct 09 20:49:29.02: [19415]: --> [2:OK] Oct 09 20:49:29.02: [19415]: <-- [9:AT+FRH=3\r] Oct 09 20:49:29.46: [19415]: --> [7:CONNECT] Oct 09 20:49:30.70: [19415]: --> [2:OK] Oct 09 20:49:30.70: [19415]: REMOTE wants 14400 bit/s Oct 09 20:49:30.70: [19415]: REMOTE wants A4 page width (215 mm) Oct 09 20:49:30.70: [19415]: REMOTE wants unlimited page length Oct 09 20:49:30.70: [19415]: REMOTE wants 3.85 line/mm Oct 09 20:49:30.70: [19415]: REMOTE wants 2-D MMR Oct 09 20:49:30.70: [19415]: REMOTE wants T.30 Annex A, 256-byte ECM Oct 09 20:49:30.70: [19415]: RECV recv DCS (command signal) Oct 09 20:49:30.70: [19415]: RECV training at v.17 14400 bit/s Oct 09 20:49:30.70: [19415]: <-- [11:AT+FRM=145\r] Oct 09 20:49:32.38: [19415]: --> [7:CONNECT] Oct 09 20:49:33.98: [19415]: RECV: TCF 2712 bytes, 0% non-zero, 2699 zero-run Oct 09 20:49:34.02: [19415]: --> [10:NO CARRIER] Oct 09 20:49:34.02: [19415]: <-- [9:AT+FRS=7\r] Oct 09 20:49:34.34: [19415]: --> [2:OK] Oct 09 20:49:34.34: [19415]: TRAINING succeeded Oct 09 20:49:34.34: [19415]: <-- [9:AT+FTH=3\r] Oct 09 20:49:34.62: [19415]: --> [7:CONNECT] Oct 09 20:49:34.62: [19415]: <-- data [3] Oct 09 20:49:34.62: [19415]: <-- data [2] Oct 09 20:49:35.86: [19415]: --> [2:OK] Oct 09 20:49:35.86: [19415]: <-- [11:AT+FRM=146\r] Oct 09 20:49:36.78: [19415]: --> [7:CONNECT] Oct 09 20:49:37.14: [19415]: RECV received frame number 0 Oct 09 20:49:37.30: [19415]: RECV received frame number 1 Oct 09 20:49:37.46: [19415]: RECV received frame number 2 Oct 09 20:49:37.54: [19415]: RECV received frame number 3 Oct 09 20:49:37.70: [19415]: RECV received frame number 4 Oct 09 20:49:37.86: [19415]: RECV received frame number 5 Oct 09 20:49:38.02: [19415]: RECV received frame number 6 Oct 09 20:49:38.18: [19415]: RECV received frame number 7 Oct 09 20:49:38.34: [19415]: RECV received frame number 8 Oct 09 20:49:38.42: [19415]: RECV received frame number 9 Oct 09 20:49:38.58: [19415]: RECV received frame number 10 Oct 09 20:49:38.74: [19415]: RECV received frame number 11 Oct 09 20:49:38.90: [19415]: RECV received frame number 12 Oct 09 20:49:39.06: [19415]: RECV received frame number 13 Oct 09 20:49:39.22: [19415]: RECV received frame number 14 Oct 09 20:49:39.38: [19415]: RECV received frame number 15 Oct 09 20:49:39.46: [19415]: RECV received frame number 16 Oct 09 20:49:39.62: [19415]: RECV received frame number 17 Oct 09 20:49:39.78: [19415]: RECV received frame number 18 ...
John
|