HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] remote sending fax machine receives error while Hylafax receives a clean fax



Angelo Scagnetti wrote:
May 14 11:28:20.49: [ 4391]: RECV: 7429 bytes of data, 2256 total lines
May 14 11:28:20.49: [ 4391]: <-- [9:AT+FRS=7\r]
May 14 11:28:20.60: [ 4391]: --> [2:OK]
May 14 11:28:20.60: [ 4391]: <-- [9:AT+FTH=3\r]
May 14 11:28:28.15: [ 4391]: --> [0:]
May 14 11:28:28.15: [ 4391]: RECV send MCF (message confirmation)
May 14 11:28:28.15: [ 4391]: <-- [9:AT+FRH=3\r]
May 14 11:28:28.15: [ 4391]: RECV FAX (000020573): from , page 1 in 0:16, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
May 14 11:28:28.15: [ 4391]: RECV FAX (000020573): recvq/fax000000632.tif from , route to <unspecified>, 1 pages in 0:25
May 14 11:28:28.29: [ 4391]: --> [8:AT+FRH=3]
May 14 11:28:28.29: [ 4391]: RECV FAX: bin/faxrcvd "recvq/fax000000632.tif" "ttyS0" "000020573" "" "" ""
May 14 11:28:28.29: [ 4391]: RECV FAX: end
May 14 11:28:28.29: [ 4391]: SESSION END

The error is there. Notice that there is no "CONNECT" response to the AT+FTH=3 command. Notice that the AT+FRH=3 command after it "echos" back. It seems as though the modem crashed and reset itself.


Smells like a USR. Is it?

May 14 11:30:57.33: [ 4391]: RECV: 7427 bytes of data, 2256 total lines
May 14 11:30:57.34: [ 4391]: <-- [9:AT+FRS=7\r]
May 14 11:30:57.44: [ 4391]: --> [2:OK]
May 14 11:30:57.44: [ 4391]: <-- [9:AT+FTH=3\r]
May 14 11:30:57.64: [ 4391]: --> [7:CONNECT]
May 14 11:30:57.64: [ 4391]: <-- data [3]
May 14 11:30:57.64: [ 4391]: <-- data [2]
May 14 11:30:58.82: [ 4391]: --> [2:OK]
May 14 11:30:58.82: [ 4391]: RECV send MCF (message confirmation)
May 14 11:30:58.82: [ 4391]: <-- [9:AT+FRH=3\r]
May 14 11:30:58.82: [ 4391]: RECV FAX (000020574): from , page 1 in 0:09, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
May 14 11:30:58.82: [ 4391]: RECV FAX (000020574): recvq/fax000000633.tif from , route to <unspecified>, 1 pages in 0:18
May 14 11:30:59.35: [ 4391]: --> [7:CONNECT]
May 14 11:31:00.20: [ 4391]: --> [2:OK]

Notice that *this* is the way it's supposed to go.


Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions