[hylafax-users] HylaFAX<->T38modem<->Asterisk

[Dragos Oprea <dragos@xxxxxxxxxxx>]

Hello !

I tryed to compile T38modem v.1.0.0 for the SIP support, but I get 
segmentation fault :(
So, I download ver. 0.6.2 for H323, have all setup but it is not working :(

Asterisk
--------------------
core*CLI>
    -- Executing [8003@fax:1] Answer("OOH323/OpenH323 Answering 
Machine v0.6.2-8796", "") in new stack
    -- Executing [8003@fax:2] Dial("OOH323/OpenH323 Answering 
Machine v0.6.2-8796", "OOH323/t38modem1|40") in new stack
    -- Called t38modem1
    -- OOH323/t38modem1-2d31 is ringing
  == Spawn extension (fax, 8003, 2) exited non-zero on 
'OOH323/OpenH323 Answering Machine v0.6.2-8796'
core*CLI>
-------------------

T38modem
--------------------
O/G connection to 8003@xxxxxxxxx
I/C connection
Closing connection
Closing connection
--------------------

HylaFAX
--------------------
Mar 18 17:09:07.73: [11783]: SESSION BEGIN 000000165 8003
Mar 18 17:09:07.73: [11783]: HylaFAX (tm) Version 4.4.2
Mar 18 17:09:07.73: [11783]: SEND FAX: JOB 140 DEST 8003 COMMID 
000000165 DEVICE '/dev/ttyx0' FROM 'test <test>' USER test
Mar 18 17:09:07.73: [11783]: STATE CHANGE: RUNNING -> SENDING
Mar 18 17:09:07.73: [11783]: <-- [12:AT+FCLASS=1\r]
Mar 18 17:09:07.73: [11783]: --> [2:OK]
Mar 18 17:09:07.73: [11783]: DIAL 8003
Mar 18 17:09:07.73: [11783]: <-- [9:ATDT8003\r]
Mar 18 17:09:18.02: [11783]: --> [4:BUSY]
Mar 18 17:09:18.02: [11783]: SEND FAILED: JOB 140 DEST 8003 ERR [1] 
Busy signal detected
Mar 18 17:09:19.02: [11783]: <-- [5:ATH0\r]
Mar 18 17:09:19.02: [11783]: --> [2:OK]
Mar 18 17:09:19.02: [11783]: MODEM set DTR OFF
Mar 18 17:09:19.02: [11783]: MODEM set baud rate: 0 baud (flow 
control unchanged)
Mar 18 17:09:19.02: [11783]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 18 17:09:19.02: [11783]: SESSION END
-------------------------------

I get busy tone when I try to call, and no carrier on the answer end.

Any sugestion ?
Thanks



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*