Re: [hylafax-users] Error When Sending With &D0

[Amir Levin <amir.levin@xxxxxxxxx>]

I have 2 exact modems (Trendnet TFM-560X) which are working perfectly 
when connecting to the serial port.
The problems started when I connected them through a USB converter.

Without &D0 the modem won't dial.
Putting it once with &W is a good idea but still there's an error when 
sending (I guess that when receiving as well).

Amir

Lee Howard wrote:
> Amir Levin wrote:
> > ModemResetCmds:         AT&D0&W
> >   
>
> Putting &W in an automatically-called and repeating command (will be 
> done on every call) will likely wear out the chip on the modem.  Do 
> AT&W once and then stop doing it.
>
> > Mar 10 09:39:28.83: [23933]: SEND training at v.17 14400 bit/s
> > Mar 10 09:39:28.83: [23933]: <-- [9:AT+FRS=7\r]
> > Mar 10 09:39:28.92: [23933]: --> [2:OK]
> > Mar 10 09:39:28.92: [23933]: <-- [9:AT+FTH=3\r]
> > Mar 10 09:39:34.79: [23933]: --> [7:CONNECT]
> > Mar 10 09:39:34.79: [23933]: <-- data [23]
> > Mar 10 09:39:34.79: [23933]: <-- data [2]
> > Mar 10 09:39:34.80: [23933]: --> [5:ERROR]
> >   
>
> > This is the log at the answering machine:
> >
> >
> > Mar 10 09:39:28.86: [23838]: <-- [9:AT+FRH=3\r]
> > Mar 10 09:39:28.98: [23838]: --> [7:CONNECT]
> > Mar 10 09:39:34.82: [23838]: --> [10:NO CARRIER]
>
> What kind of sending modem is this?  It seems to be broken.
>
> You seem to indicate that this behavior only occurs when sending with 
> &D0.  Does this not happen when not sending with &D0?
>
> Thanks,
>
> Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*