Re: [hylafax-users] CallID in 5.2.1

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

bill.allison@xxxxxxxxx wrote:
> Reversed the patches and the effect is still there and I've tied it down   
> to this - setting server tracing to any value that has this bit set   
> triggers caller ID insertion in the tiff file to work.
>
> 8192 (0x02000) Config File Parsing
>
> Attached are my config files in case the other part of the equation is   
> something wrong in there, although they are the same ones I used ok with   
> 5.1.5

I set ServerTracing and SessionTracing both to 0 in my modem config 
file.  I changed the "trace" log debug entries into printf calls, and I 
ran faxgetty in "non-daemon" mode...

[root@gollum log]# faxgetty iaxmodem1
id: "9375350907
100
Lee's Office
<NONE>
400"recvPage id: "9375350907
100
Lee's Office
<NONE>
400"recvSetupTIFF id: "9375350907
100
Lee's Office
<NONE>

The Caller*ID information is coming through and is getting stored in the 
"id" variable as expected... at least on my dev system here.  
Furthermore, the Caller*ID information *is* getting stored in the TIFF 
file in TIFFTAG_IMAGEDESCRIPTION as expected.

So something is still not right.  Can you take that previous patch, 
change the function to be printf instead, run faxgetty in this manner as 
I described, and do the same?  (If you also add a "\n" at the end of the 
debug string it will help readability.)

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*