Re: [hylafax-users] Hylafax v4.3.4-1 on Redhat Linux AS 3 update 8; multitech MT5656ZDX

[Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx>]

srikanth.s.sureddy@xxxxxxxxxxx wrote:
> I have the same setup on a different site with redhat AS 3 update 3 and 
> hylafax v4.3.4-1 and multi tech mt5656ZDX. The only difference is the 
> uart is 16550A on the one which hylafax works and it is 16950 on the one 
> which does not work.

The 16950 uses a different driver and may be the source of your 
problems.  To find out, disable HylaFAX, disconnect the modem, and plug 
in a RS232 loopback cable... then run some tests that send/receive large 
amounts of data over the RS232 port.  If this works then you know the 
problem is elsewhere.

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*